|
| 1 | Civil Work |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like byscrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.(D.S.R 14.46) |
| 3 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement: 4 fine sand) DSR 14.1.1 |
| 4 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.(D.S.R 13.26) |
| 5 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) (DSR 13.90.1) |
| 6 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm).(DSR 14.66.2) |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (D.S.R 14.54.1) |
| 8 | Dismantling tile work in floors and roofs/wall laid or fix in cement mortar includingstacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm.(D.S.R.15.23.1 ) |
| 9 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar (D.S.R. 15.7.4) |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement : 4 coarse sand) (D.S.R 6.4.1) |
| 11 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. etres and below (D.S.R.15.12.1) |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 9.20.1 |
| 13 | Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including Ilnd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge. With decorative veneering on one side and commercial veering on other side.(DSR 9.130.1) |
| 14 | Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. DSR 9.119 |
| 15 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. |
| 16 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead : Door chowkhats (DSR 14.2.1) |
| 17 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 metres lead : Window chowkhats (DSR 14.2.1) |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (D.S.R 11.36) |
| 19 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.(D.S.R 11.37) |
| 20 | Providing and fixing 18 mm thick gang saw cut, mirrorpolishedpremoulded and prepolished, machine cut for kitchen platforms,vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red: Area of slab upto 0.50 sqm (DSR 8.2.2.1) |
| 21 | Demolishing mud phaska in terracing and disposal of material within 50 metres lead as per dirction of Engineer - In - Charge. |
| 22 | 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @35 kg per cum of earth and gobri leaping with mix 1:1 ( 1 clay : 1 cow dung ) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integal water proofing compound by weight of cement and finished neat; with common burnt clay F.P.S(non modular) brick tile of class designation 10 . (DSR 12.16.1) |
| 23 | New brick tiles using the re-grading terracing of mud phaska for damaged tiles |
| 24 | Painting top roofs with bitumen of approved quality at 17kg per 10 sqm impregnated with a coat of coarse sand at 60cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete (with residual type petroleum bitumen of penetration VG-10 bulk to the entire satisfaction of the E.I.C.(DSR 12.15.1) |
| 25 | Providing and laying position revounding layer in the form of polythene sheet 125 micron thick (subject to approval of Engineer-in-charge) laid flat with over laps of 300mm width including nailing top lower surface concrete with nails (measurement shall be limited to net area without any allowance for over laps) complete in all respect to the entire satisfaction of Engineer in charge. |
| 26 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm (D.S.R 9.96.2) |
| 27 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase (D.S.R 12.21.1) |
| 28 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete (DSR 12.22) |
| 29 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including black enamelled ISI marked MS butt hinges with necessary screws. Kiln Seasoned selected planks of sheesham wood of 30 mm thick DSR 9.9.3.2 |
| 30 | P/F wire gauge shutters using galvanized M.S. wire gauge - aperture 1.4 mm in both directions 0.63 mm dia wire for doors, windows etc - 35 mm thick - M.S. pressed butt hinges - Kiln seasoned chemically treated hollock wood. (DSR 9.27.1.1.2) |
| 31 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150 X 10mm (DSR 9.97.4) |
| 32 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125mm(DSR 9.66.1) |
| 33 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.(D.S.R 9.84) |
| 34 | Renewing glass panes, with wooden fillets wherever necessary. Float glass panes of thickness 4 mm (DSR 14.6.1) |
| 35 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper (DSR 9.101.1) |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. (DSR 11.41.2) |
| 37 | Providing and fixing kitchen cabinet below working shelves as per detail consists of chowkhet frame of hollock wood 2\\" x2\\" section with suitable rebate of 1\\" x ½\\" on outer side for shutter. The shutter are to be provided with 19mm thick commercial board pasted with synthetic adhesive with any approved colour lamination 1mm thick with lipping all around and fixed with chowkhet frame with alpha type piano hinges and screwa etc. and provide with fancy teak wood handle and magnetic catcher. The inside surface to be painted with two coat of special quality synthetic enamal paint after primer coat and preparation of surface. The complete frame to be fixed with iron hold fast ,corners, straps etc. complete in all respect to the entire satisfaction of the E.I.C. Note: - The measurement to be paid only front side, no extra measurement to be paid other sides. |
| 38 | Providing and fixing wooden cabinet of 13 ½\\" deep and 2' height with openable shutter at wall above 4'-9\\" height consisting of 19mm thick commercial board (ISI) marked) make lipped with teak wood lipping of 19x6mm on exposed edges includes cost of piano hinges and handle, nail, screws, synthetic adhesive etc. the front sutter and sides laminated 1mm with laminated of approved shade and make remaining sides of cabinet to be painted with special quality white paint over one coat of wooden primer after preparation of plywood surface and fixed in position with help wooden gutties at wall complete in all respect to the entire satisfaction of the E.I.C. The measurement to be paid only front side, no extra measurement to be paid other sides. |
| 39 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge 1:3:6 or richer mix DSR 15.2.1 |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:5:10 (1 Cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). DSR 4.1.10 |
| 41 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete in all respect to the entire satisfaction of Engineer - In - Charge. (DSR No.5.1.2) |
| 42 | Demolishing R.C.C. work, including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (DSR 15.3) |
| 43 | Centring and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) DSR 5.9.4 |
| 44 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Mild steel and Medium\Tensile steel bars. (DSR 5.22.1) |
| 45 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).DSR 5.8 |
| 46 | Centring and shuttering including strutting, propping etc. and removal of form for :Edges of slabs and breaks in floors and walls. Under 20 cm wide (DSR 5.9.16.1) |
| 47 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia M.S. tube 1.5m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.Stairecase system in the scaffolding for working platform etc. and mainatainig it in a servicable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc sherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. (DSR 14.72) |
| 48 | Steel work in built up section/ framed work including cutting, hoisting, fixing in postion and applying a priming coat of approved steel primer using structural steel etc. as requried. (DSR 10.25.2) |
| 49 | Credit of doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 50 | Credit of bricks/ Bricks bats / brick tiles / brick tiles bats complete in all respect and to the entire satisfaction of the Engineer-in-charge. |
| 51 | PROVISION OF PUBLIC HEALTH WORK |
| 52 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 53 | 10 litre capacity - White 1x 74 No Houses = 74 No |
| 54 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 55 | Orissa pattern W.C. pan of size 580x440 mm make hindware, parryware, cera35% of Total Housesi.e 35% of 74 = 25.9 say 26 No |
| 56 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length : |
| 57 | 15 mm nominal bore 5 No in one houseFor 74 No houses i.e 74 x 5 no = 370 No |
| 58 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. make cera |
| 59 | 15 mm nominal bore4 No in one houseFor 74 No houses i.e 74 x 4 no = 296 No |
| 60 | Providing & fixing of 4\\" CI P trap complete (NSI) |
| 61 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: make cera, hindware, parryware |
| 62 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps For 74 No houses i.e 1 x 74 no = 74 No |
| 63 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 make cera |
| 64 | 15mm nominal bore5 No in one houseFor 74 No houses i.e 74 x 5 no = 370 No |
| 65 | Providing and fixing PTMT grating of approved quality and colour. Circular type. |
| 66 | 100 mm nominal dia For 74 No houses i.e 1 x 74 no = 74 No |
| 67 | 125 mm nominal dia with 25 mm waste hole 2 No in one houseFor 74 No houses i.e 2 x 74 no = 148 No |
| 68 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 69 | 15 mm nominal bore 60% of total houses i.e 60% of 74 No = 45 No3 no unions for each housesi.e 3 no x 45 no = 135 No |
| 70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank .make jindal, supreme, sintex 60% of 74 No = 45 No500 ltr for each house i.e 45 No x 500 Ltr = 22500 Ltr |
| 71 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete :15 mm nominal bore 60% of 74 No = 45 No ( for new tanki)25 no for repair work |
| 72 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 2 No in one houseFor 74 No houses i.e 2 x 74 no = 148 No |
| 73 | Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 : 15 mm nominal bor2 No in one houseFor 74 No houses i.e 2 x 74 no = 148 No |
| 74 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid make cera, hindware, parryware60% of total houses i.e 60% of 74 No = 45 No |
| 75 | Proving and fixing of PVC pipe of ISI marked complete for low level cistern (NS)For 74 No houses 1x 74 No = 74 No |
| 76 | Providing and fixing of 4\\" i/d PVC pipe of 4kg/cm2 make : Finolex / Diplast complete with specials clamps repair (NS)Talen L.S. for the houses |
| 77 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 78 | 15 mm dia nominal bore Approx 60% of total housesi.e 60% of 74 No = 45 No5 mtr for each housesi.e 45 No x 4 mtr = 180 mtr |
| 79 | 20 mm dia nominal bore Approx 60% of total housesi.e 60% of 74 No = 45 No3 mtr for each housesi.e 45 No x 3 mtr = 135 mtr |
| 80 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 81 | Kitchen sink with drain board |
| 82 | 510x1040 mm bowl depth 200 mm.Approx 60% of total housesi.e 60% of 74 No = 45 No |
| 83 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore Approx 60% of total housesi.e 60% of 74 No = 45 No |
| 84 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm.Approx 60% of total housesi.e 60% of 74 No = 45 No |
| 85 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality :M D - 10Square shape 450 mm internal dimension Approx 60% of total housesi.e 60% of 74 No = 45 No |
| 86 | Less against old material |
| 87 | PROVISION OF ELECTRICAL DEPARTMENT WORK |
| 88 | Wiring for light point/ fan point/ exhaust fan point with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable in recessed heavy duty PVC conduit ISI marked with modular switch, modular plate, blanking plate if required, suitable size GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable including GI Box, Modular switch socket & 5/6A Switch single pole etc complete as required. Make: Legrand, Northwest Wipro, Norysis, Captree (Murano), Schneider, Hager, ABB Group - C Cable: Finolex/Polycab/Havells/KEI |
| 89 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.Group C DSR 1.15.3 |
| 90 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the samein case of recessed conduit as required. DSR 1.21 |
| 91 | 25mm 1.21.2 |
| 92 | 40mm 1.21.4 |
| 93 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ woodenblock including connection etc. as required. |
| 94 | Supplying and fixing brass batten/ angle holder including connection etc. as required. DSR 1.34 |
| 95 | Supplying and fixing suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc. as required. |
| 96 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. |
| 97 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. DSR 1.17 |
| 98 | 1X1.5SQ.MM 1.17.1 |
| 99 | 3 x 2.5 sq. mm 1.17.12 |
| 100 | 3X4 sq mm 1.17.21 |
| 101 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole DSR 2.10.1 |
| 102 | Supplying and fixing call bell buzzer suitable for single phase, 230 V, complete as required. Make: Anchor/Havells/panasonics/philips/ABB/Legrand/Wipro |
| 103 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. Make: Legrand, Northwest Wipro, Norysis, Captree (Murano), Schneider, ABB, Havells |
| 104 | Supplying and fixing two module stepped type elctronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR 1.25 |
| 105 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator) 12 way, Double door |
| 106 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40Amp Make:legrand /Seimens/Scheider/L&T/ABB/Hager |
| 107 | Providing and fixing of 40/63 Amps DP enclosure. Make: ABB, Havells, Schneider, Legrand, L&T. |
| 108 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. Make : ABB, Havells, legrand, northwest Wipro, Norysis, Captree(Murano)Schneider,ABB,Hagger. |
| 109 | 2 Module (75mmX75mm) 1.27.1 |
| 110 | 6 Module (200mmX75mm) 1.27.4 |
| 111 | S/F modular type switch/socketSupplying and fixing following modular switch /socket on the existing modular plate & switch box including connections but excluding modular plate Make: Anchor/Havells/panasonics/philips/ABB/Legrand/Wipro or its terminal equivalent make in recess etc as required as per existing model. 5/6 Amp. switch |
| 112 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Make: ABB, Havells, Legrand, Northwest Wipro, Norysis, Captree (Murano), Schneider |
| 113 | Supplying and fixing following piano type switch/socket on the existing switch board/cover including connections etc. as required. Anchor/ Havells/ Panasonic/ Philips/ABB/Legrand or its terminal equivalent make |
| 114 | 5/6 A switch |
| 115 | 15/16 A switch |
| 116 | 3 pin 5/6 A socket outlet |
| 117 | 6 pin 15/16 A socket outlet |
| 118 | 2 way 5/6 A switch |
| 119 | Bell push |
| 120 | G.I. Earth pipe electrode with salt/Charcoal: Supply and laying of earth electrode made out of ISI marked ‘B’ class G.I. pipe 4.5 Mtr. long 40 mm dia including accessories. GI pipe electrode shall be cut tapered at the bottom and provided with holes of 12mm dia, drilled not less than 7.5 cm from each other upto 2 Mtr. of length from bottom. The earth electrode shall be laid in ground after boring as per CPWD specifications complete in all respect and to the entire satisfaction of the engineer-in-charge. |
| 121 | P/F 6 SWG GI earth wire:Providing & fixing earth connection from earth electrode with 6 SWG dia G.I. wire to pole, as required including nut, bolt washer and drilling hole etc to the entire satisfaction of Engineer-in-Charge. |
| 122 | Supply and Erection of bakelite sheet of 3mm with cutting & making good etc. on the existing M.S. boxes with suitable size of screws & washers etc. The work shall be executed to the entire satisfaction of Engineer-in-Charge. |
| 123 | Recovery items |
| 124 | Less the cost of old ceiling fan |
| 125 | Less the cost of old exhaust fan |
| 126 | Less the cost of Old MS Box of all sizes |
| 127 | Less the cost of Old Copper wire |
| 128 | Less the cost of old DB including MCBs |
| 129 | Less the cost of old isolator with enclosure |
| 130 | Less the cost of Old MS Shutter |
| 131 | Less the cost of old switch and sockets Please Enable Macros to View BoQ information |
