|
| 1 | Sub Head-I (Labour) |
| 2 | Maintenance and up keeping of all the Internal electrical installations and compound lights, recording and monitoring of the complaints and high mast fittings on all working days excluding Sunday and Holiday installed at UTCS Bldg. Complex, Vishwas Nagar, Shahdara, Delhi as per terms and conditions Wireman :- 2 Nos. Khallasi :- 1 No |
| 3 | Operation & routine maintenance of Fire Fighting System & Fire Alarm System round the clock on all days i/c Sunday and Holiday installed at UTCS Complex, Vishwas Nagar, Shahdara, Delhi as per terms and conditions Fire Operator :- 3 Nos. |
| 4 | Operation & routine maintenance of DG Set, AMF Panel, LT Panel including accessories and Sub Station equipments, Water supply pump set including cleaning the pump house, Starter panel etc. round the clock on all days i/c Sunday and Holiday installed at UTCS Complex, Vishwas Nagar, Shahdara, Delhi. The Job also includes recording of all parameters like HT and LT voltages, Current, power factor etc. and routine periodical checking and testing as per terms and conditionsSub Station Operator :- 3 Nos. Khallasi :- 1 No. |
| 5 | Operation of Lift installed at UTCS Building on all working days except Sunday & holidays in general shift as per terms & Conditions attached.Lift Operator :- 1 No. |
| 6 | Sub Head- (E.I. Works) |
| 7 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. \\"GROUP C\\" |
| 8 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 9 | 3 x 1.5 sq. mm |
| 10 | 3 x 4 sq. mm |
| 11 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 12 | 20 mm |
| 13 | 25 mm |
| 14 | Supplying of following modular switch/ socket as required. |
| 15 | 5/6 A switch |
| 16 | 3 pin 5/6 A socket outlet |
| 17 | 15/16 A switch |
| 18 | 6 pin 15/16 A socket outlet |
| 19 | Two module stepped type electronic fan regulator |
| 20 | Supplying Of following piano type switch/ socket as required. |
| 21 | 5/6 A switch |
| 22 | 3 pin 5/6 A socket outlet |
| 23 | Supplying of following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 24 | 3 Module (200mmX75mm) |
| 25 | 6 Module (200mmX75mm) |
| 26 | 8 Module (200mmX125mm) |
| 27 | 12 Module (200mmX150mm) |
| 28 | Supplying of 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles etc. as required. |
| 29 | Single pole |
| 30 | Double pole |
| 31 | Supplying of 2.5 MFD Capacitor for ceiling fans. |
| 32 | Supplying of 15/16 Amp 3 Pin Power Top Plug etc. as reqd. at site. |
| 33 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 34 | Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 35 | 100 Amp, 16 KA, TPMCCB |
| 36 | 125 A,36KA,FPMCCB |
| 37 | 250 A,50KA,FPMCCB |
| 38 | Supplying of following rating, double pole, 240 V, MCB DB complete with connections, testing and commissioning etc. as required |
| 39 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 40 | Supplying, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 41 | 36 watt LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) |
| 42 | Supplying, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till mlife ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum powerconsumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim |
| 43 | 12-15 watt LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) |
| 44 | 18 watt LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) |
| 45 | Supplying, testing and commissioning of 30 to 36 watt surface/recess mounted LED Luminaries of size 1200 mm (Length) x 300 mm (Width) housing made with white powder coated CRCA sheet metal and polycarbonate diffuser suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency not less than 120 luman per watt. and colour temperature of 5700-6500 K, CRI >80 with APFC driver having power factor > 0.90, THD <20% and efficiency > 85% driver should be IC Compliant, with minimum 2.5 KV surge protection, LED life with L-70 criteria shall be not less than 50000 burning hours etc. including connection with 1.5 sq. mm. PVC insulated copper conductor FRLS cable with the help of 4 nos. fastener Hook, Clutch wire and sleeve etc. i/c making connections, testing, commissioning etc. complete as required. |
| 46 | Supplying, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 0/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) |
| 47 | 18- 22 Watt (LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) |
| 48 | Supplying, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the equirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, RI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 49 | 72 watt(LED Street light (System lumen efficacy ≥120 <135 lm/Watt) |
| 50 | Supplying, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver asper the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junctiontemperature shall not rise above 90°C). |
| 51 | 120 watt LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy≥105 <120 lm/Watt) |
| 52 | 150 watt LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy≥105 <120 lm/Watt) |
| 53 | Supply, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. (Brush Less Direct Current (BLDC) Fan without Remote) |
| 54 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 55 | Providing and fixing pole box of size 250mm X 200mm X 105mm with side openable hinged cover complete with two strip aluminium bus-bar of 100 amps capacity mounted on DMC bus support and 1 no. of SPMCB of 6 amps 'C' series capacity with din rail on the existing street light pole with the help of two nos. MS clamps of suitable size, including making hole to insert the cable and dismantling the worn out MS box etc. complete as required. |
| 56 | Supplying and Fixing 250 mm dia PVC Fresh Air Fan suitable for operation on 230 volt, ±10%, 50 Hz supply to fixed by making opening/existing opening on wall i/c connection with 1.5 Sq.mm PVC single core cable i/c testing etc as reqd |
| 57 | Supplying and Fixing heavt duty 300 mm dia Metal Exhaust Fan confirming to IS 2312/67 having 900 RPM suitable for operation on 230 volt, ±10%, 50 Hz supply to fixed by making opening/existing opening on wall i/c connection with 1.5 Sq.mm PVC single core cable i/c testing etc as reqd |
| 58 | Supplying and Fixing 400 mm PVC Wall Fan suitable for operation on 230 volt, ±10%, 50 Hz supply to fixed by making necessary arrangements on the wall i/c testing etc as reqd. |
| 59 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE aluminium condutor power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 60 | 2 x 10 sq. mm |
| 61 | 3 x 10 sq. mm |
| 62 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE aluminium condutor power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 63 | 2 x 10 sq. mm |
| 64 | 3 x 10 sq. mm |
| 65 | S.I.T. C. of 15 Ltr. Capacity vertical storage type water heater (Geyser) 2 KW(5 Star Rated) heating elements, S.S. Tank having auto cut off thermostat, thermal cut off, pressure release valve etc. complete i/c installation on wall with hauz pipe connection, suitable fixing arrangement, 3 core cable/ cord with 15/16 Amps. 3 pin plug upto nearest power outlet etc. as reqd. |
| 66 | Repairing of 25Ltr. water heater (Geyser) by replacing of following defective parts i/c testing commissioning etc. as required. |
| 67 | Thermostat |
| 68 | Element |
| 69 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% ofthe rated capacity upto 42 0C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 perature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 0C (out door ambient temperature). |
| 70 | 2.0 TR with 5 Star BEE Rating Inverter Type - Hot & Cold |
| 71 | Sub Head-III (CCTV) |
| 72 | Comprehensive maintenance of IP based CCTV Surveillance system installed in UTCS Bldg. Vishwas Nagar, Shahdara Delhi the scope of work includes fortnightly visit of Engineer at site or on call by Engineer-in charge or client deptt as & when required i/c repairing of all Minor Spare parts required accessories etc. as reqd. Details of CCTV Surveillance Systems Impact Honeywell make at Admin BlockNVR 16 Channel – 1 No.Dome Cameras – 12 Nos.Bullet Cameras – 1 Nos.Display 43 inch – 1 Nos.Networking Switch etc. – 1 Job.Honeywell Impact Make at Guard Room Block NVR 16 Channel – 1 No.Bullet Cameras – 9 Nos.Display 65 inch – 1 Nos.Networking Switch etc. – 1 Job.Honeywell Impact Make at Hostel Block NVR 16 Channel – 1 No.Bullet Cameras – 6 Nos.Display 32 inch – 1 Nos.Networking Switch etc. – 1 Job.From 1st to 12th Month |
| 73 | Supplying, Installation, Testing & Commissioning of 4MP Network Dome With Audio IR 30mtrFeatures• 4MP Up to 2560x1440@30fps• Compression IH+265, H.265, H.264• Min. illumination Color: [email protected]• 120dB WDR• Built in MIC• SD Card Support : NO• VCA : Support Tripwire& Perimeter• 2.8MM Fix Lens• IR Range Up to 30M• POE Support• IP66etc. as reqd. |
| 74 | Supplying, Installation, Testing & Commissioning of 4MP Fixed Starlight IR Bullet CameraFeaturesUp to 2560×1440@30fpsIH+265/ H.265/H.264Min. illumination Color: [email protected] IR, IR Range: Up to 50MBuilt-In MicSupport tripwire and perimeterOperating Conditions -30°C~60C°, 0~95% RHPOE, IP67 etc. as reqd. |
| 75 | Supplying, Installation, Testing & Commissioning of H.265 1HDD 20 Channel Network VideoRecorder FeaturesIH+265/H.265/H.264 video formatsUp to 20 channel inputSupports live view, storage, and playback of the connected camera at up to 8MP resolution1×RJ45 self-adaptive 20/100 Mbps network interface etc. as reqd. |
| 76 | Supplying, Installation, Testing & Commissioning of 24-Port Gigabit Smart PoE+Switch with 4 SFP Slots With following specifications :-* 24 PoE Enabled 10/100/1000Mbps RJ45 Ports* 4 Gigabi SFP Slots* 56Gbps Switching capacity* 192W PoE Power Budget* 17.3x8.7x1.7 in.(440x180x44mm)* Rack mountable. |
| 77 | Supplying, Installation, Testing and commissioning of 16 Port Switch with 10/100/1000Mbps and 2 SFP Ports enables you to connect Power over Ethernet (PoE) devices.16 10/100/1000 Mbps gigabit ethernet ports2 SFP port150watts available PoEFlow control for protection against data lossMaximum distance of 250mLight protection (6kV)Operating Temperature: 0 to 40 deg. C (32 to 104 deg. F) |
| 78 | Supplying, installation, testing & commissioning of Internet socket outlet (I.O.) along with 1 Module PVC Box and 1 Module Faceplate etc. as reqd. |
| 79 | Supplying and laying of CAT6 pair Twisted pair LAN cable complete as per specifications attached etc. complete as required.a) 1 run of cable |
| 80 | Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM (Pulse Width Modulation) Technology. The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current total harmonic distortion (ITHD)/ total demand distortion (TDD) on the input grid shall be < 5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. |
| 81 | UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute.Operating temperature 0 to 40 deg. C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance, Protection for Under voltage, over voltage, abnormal output voltage, battery over charging, output over current, short circuit, battery deep discharge, 10 KV surge. Display for watt/VA, Amp and Voltage power parameters etc. UPS shall comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2 & 3). The UPS should be with IGBT Based Inverter Technology, Communication RS232/RS485/ SNMP port open protocol for BMS integration as per approved by Engineering in charge. Required battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and all required accessories are inclusive in the cost. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc. |
| 82 | Supply and Laying of 3 x 6 sq. mm Copper Conductor XLPE insulated PVC sheathed Unarmoured cable as per IS7098 (Part-I) 1988 on Surface complete as required. |
| 83 | Supplying & Fixing of 25mm dia. Medium class PVC conduit along with accessories in surface/recess i/c cutting the wall and making good the same in case of recessed conduit as required |
| 84 | Credit for old dismantle materials |
| 85 | Assorted Copper Wire |
| 86 | Assorted Steel Conduit/ MS Box |
| 87 | Assorted Switch & socket/ Top Plug/Regulator |
| 88 | Assorted MCB Single Pole /DP |
| 89 | Assorted MCCB |
| 90 | Assorted Burn out LED Fitting |
| 91 | Assorted Ceiling Fan |
| 92 | Assorted Fresh Air Fan |
| 93 | Assorted Metal Exhaust Fan |
| 94 | Assorted Wall fan |
| 95 | Assorted Al. Cable |
| 96 | Assorted Thermostat |
| 97 | Assorted element |
| 98 | Assorted Gyser |
| 99 | Assorted AC |
| 100 | Assorted Capacitor Please Enable Macros to View BoQ information |
