|
| 1 | Demolition of RCC work manually by mechanical means and stock piling at designated locations and disposal of dismentalled materials upto a lead of 1 Km, stacking serviceable and unserviceable material separately including cutting reinforcement bars including carriage of material complete in all respect with in all leads & lifts as per the entire satisfaction of the Engineer-in-Charge. |
| 2 | Excavation in foundation and trenches etc. in earth work in all kind of soils such as pick work jumper work,saturated soil including blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers when required into plinths,side of foundations etc including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads & lifts and shoring strutting, timbering where ever required as per direction & best satisfaction of the Engineer-in-Charge. |
| 3 | Providing & laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 4 | Providing and laying cement concrete 1:1.5:3 (1 cement: 1.5 sand 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:- |
| 5 | Foundation and Plinth including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing Mild steel/Tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level i/c carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 7 | Providing and fixing of foundation bolts of suitable size to secure the foundation plate of pumping machinery including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 8 | Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint In gratings framed guard bars, ladders, railling, trusses, purling, brackets and similar works in building complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 9 | Boulder filling dry hand packed tightly under floors including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 10 | White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt, dust and other foreign matters complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 11 | Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 12 | Finishing wall with water proofing cement paint of approved brand and manufacture (two coats ) brushing to give an even shade l/c cleaning of oil, dirt, dust and other foreign matters, sand papering and knotting etc.complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 13 | Painting two coats (excluding priming coat) on new wood and wood based surfaces, with enamel paint to give an even shade including cleaningthe surface of dirt,dust and other foreign matters sand papering and stopping with enamel paint other than white complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 14 | Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers includingconnections etc. as required. |
| 15 | Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch boxon the switch box/cover including connections etc. as required. complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 16 | Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required. complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 17 | Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required .complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 18 | Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required. complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 19 | 20.98 x 7.6 cm |
| 20 | 20.98 x 13.6 cm |
| 21 | Supplying and fixing plain pandent with 16/20 mm twin twisted, flexible PVC insulated copper cable and backelite pendant holder including connections, etc. as required. complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 22 | Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole) complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 23 | Supplying and Fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 Volts on surface/ recess, complete with tinned copper busbar, netural link, earthbar, dibnbar, detachable gland plates, inter connections, i/c painting, earthing etc. as required busbar 8 way complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 24 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc, as required. (63 amp. CAT - A) complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 25 | Providing, installing, testing and commissioning of ceiling fan and regulator i/c wiring the down rod of standard length (upto 30 Cm with 1.5 Sqmm PVC insulated copper conductor signle core complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 26 | Providing and Fixing of LED Tube Fixture 25 watt (Havell/Syska/Goldmedal make) complete in cable etc, as required Ceiling fan 1400 mm sweep category A complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 27 | Providing and Fixing LED Flood Light watt mentioned below (OREVA/Havell/Goldmedal make) complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 28 | Providing and Fixing Cast Carbon Steel Gate/Sluice Valve of following dia of KIRLOSKAR/ BIR/ KARTAR/ PELICON/ LEADER make BS No. 1414/API: 600, Class 150 with flange Table - 17 with Gasket including complete process of opening of existing valve and fixing new valve by all means. The sluice valve conforming to Class - 150 complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 29 | 40 mm dia |
| 30 | 50 mm dia |
| 31 | Providing and Fixing Cast Carbon Steel Gate/Sluice Valve of following dia of KIRLOSKAR/ BIR/ KARTAR PELICON/ LEADER make BS No. 1414/API: 600, Class 300 with flange Table 17 with Gasket including complete process of opening of existing valve and fixing new valve by all means. The sluice valve conforming to Class - 300 complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 32 | 50 mm dia |
| 33 | Providing and Fixing Cast Carbon Steel Swing Check / Non Return Valve of following dia of KIRLOSKAR/ BIR/ KARTAR / PELICON/ LEADER make BS: 1414/API: 600, Class - 150 with flange Table - 17 with Gasket including complete process of opening of existing valve and fixing new valve by all means. The sluice valve conforming to class -150 complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 34 | 40 mm dia |
| 35 | 50 mm dia |
| 36 | Providing and Fixing Cast Carbon Steel Swing Check/Non Return Valve of following dia of KIRLOSKAR/ BIR/ KARTAR / PELICON/ LEADER make BS 1; 1414/API: 600, Class- 300 with flange Table - 17 with Gasket including complete process of opening of existing valve and fixing new valve by all means. The sluice valve conforming to class - 300 complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 37 | 50 mm dia |
| 38 | Providing and fixing of MCB CHNT/HAVELS/L & T MCB 4Pole 63 AMP complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 39 | Providing and fixing of CONTACTOR CHNT 85 AMP contactor for 40HP GSM VFD Starter complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 40 | Providing and fixing of CONTACTOR CHNT 50 AMP contactor for 15HP GSM VFD Starter complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 41 | Providing and fixing of CONTACTOR CHNT 32AMP contactor for 10 HP GSM VFD Starter complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 42 | Providing and fixing of SMPS MORNSUN SMPS KIT 12V For safty of GSM VFD Starter complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 43 | Supplying and fixing of Timer Analog Time Switch F/M/1 Model GIC J6448B1 Power consumption 2 VA 240 V AC, 50/60 Hz complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
