|
| 1 | Excavation in foundation and trenches etc. in earth work in all kind of soils such as pick work jumper work,saturated soil including blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers when required into plinths,side of foundations etc including consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated soil as directed with in all leads & lifts and shoring strutting, timbering and dewatering where ever required as per direction & entire satisfaction of the Engineer-in-Charge. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1½:3 (1 Cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 9 | Manufacturing, supplying, fabrication and fixing of MS Fabricated Protection Pannel 750mm x 750mm made with MS Angle 40x40x4 mm for frame, MS Angle 30x30x3mm for cover, MS Flat 25x5mm for fixing of sliding door bolt and MS Sheet (10 gauge) 3.15mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS Angle, MS Flat & MS Sheet, Embedding in RCC Slab By drilling holes in MS Angle & in RCC Slab, provision for providing and fixing sliding door bolt 300x16mm, MS Handle 100mm, Lock and applying a coat of red Lead paint & painting two coat with steel paint (Firroza Blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 10 | Laying, jointing, testing and Carriage of GMS tubes (Light Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc (Earth work to be measured and paid for seprately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. |
| 11 | Inlet Pipe 80 mm dia |
| 12 | Outlet Pipe, Scour pipe 80 mm dia |
| 13 | Providing and fixing Gun Metal Bronze Wheel Valve (Heavy Duty) of reputed make IS: 778/1980, CL-1 complete in all respect with in all leads & lifts as per direction & entire satisfaction of the Engineer-in-Charge. |
| 14 | 80 mm dia Please Enable Macros to View BoQ information |
