|
| 1 | Cleaning of all type of concrete /masonary surface by throughly brooming with wire brush & surface grinder to remove the plaster peeling, algae ,dust,dirt and all foreingn material consolidated on surface complete in all respect. |
| 2 | Water proofing treatment on water tank on specified or marked area where heavy leakages are noticed such as bottom of tank and horizontal joints of RCC pannels of walls including cost of cutting holes in the concrete with chieseling hammering and fixing nozzles for injection grouting of water proof compound of reputed and and approved brand such as Perma-Grout or equivalent make at one foot interval to block voids or cappilaries to arrest complete leakages of RCC water retaining structures as per direction and satisfaction engineer-in-charge. |
| 3 | Providing and laying water proofing treatment on inner wall surface of RCC water storage tank by applying cement slurry mixed with polymer water-proofing compound of approved brand such as Perma Hypercrete or equivalent make in ration 1:1 or as recommended by the company including cost of providing fibre mesh in first layer (over lap of joint of fabric mesh shall not be less then 10cm., final layer of well stirred slurry of cement polymeric water proofing compound such as Perma Hypercrete or equivalent make applied with brush in perpendicular direction complete with cost of cement and sand as per direction and satisfaction engineer-in-charge . |
| 4 | Making connection of G.I. pipe i.e. cutting welding confirming to ISI specifications i.e. commissioning complete in all respects of following dia in gravity main (Earth work in trenches shall be measured and paid for seprately all leads and lifts and as per satisfaction of engineer in charge. |
| 5 | Repair of pump house |
| 6 | Demolition of cement concrete in flooring in 1:2:4 (1 cement :2 sand :4 aggregate) including disposal of the waste material complete in all respect as per entire satisfactionn of Engineer in charge.(Pump house Slab) |
| 7 | Demolition of old 15 mm thick plaster in C.M. 1:6 ( 1 cement : 6 sand ) including disposal of the waste material with in all leads and lifts complete in all respect as per entire satisfaction of Engineer in charge. |
| 8 | Demolition of old 6 mm thick plaster in ceiling in C.M. 1:3 ( 1 cement : 3 sand ) including disposal of the waste material with in all leads and lifts complete in all respect as per entire satisfaction of Engineer in charge. |
| 9 | Cement concrete in flooring in 1:2:4(1 cement :2 sand :4 aggregate) complete in all respect as per entire satisfactionn of Engineer in charge. |
| 10 | 15 mm thick plaster in C.M. 1:3 ( 1 cement : 3 sand ) including disposal of the waste material with in all leads and lifts complete in all respect as per entire satisfaction of Engineer in charge. |
| 11 | 6 mm thick plaster in ceiling in C.M. 1:4 ( 1 cement : 4 sand ) including disposal of the waste material with in all leads and lifts complete in all respect as per entire satisfaction of Engineer in charge. |
| 12 | Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick. |
| 13 | White washing with lime on undercoated wall surface (Two coats) to give an even shade including thoroughly brooming the surface to remove all dirt dust and other foreign matter. |
| 14 | Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials. |
| 15 | Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white. |
| 16 | Painting two coats (Excluding priming coat on new steel and other metal surface with enemal paint brushing into give an even shade including cleaning the surface of all dirt, dust and other foreign matter enemal paint other than white. |
| 17 | P/F 20mm PVC Electrical Pipe (HEAVY) ISI approved as per IS:9537 for surface wiring and internl wiring complete in all respecta as per entire satisfaction of Engineer in charge. |
| 18 | Wiring for sub main wiring with following sizes of PVC insulated conductor single core cable in surface /recessed PVC conduit as required (1.00 sqmm) of finolex /plaza or some ISI make approved make by HPSEB Department complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge. |
| 19 | Providing and fixing holder for bulbs Anchor/Havells/Syska make complete in all respect as per entire satisfaction of Engineer in charge. |
| 20 | Providing and fixing round electrical fan sheet complete in all respect as per entire satisfaction of Engineer in charge. |
| 21 | Providing and fixing round electrical holder sheet complete in all respect as per entire satisfaction of Engineer in charge. |
| 22 | Providing installation and commissioning and testing of of LED bulbs 20 watts fittings including 90 degree GI bend choke reflector of Bajaj /crompton /Greaves make complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge. |
| 23 | Providing fixing testing and comissioning of ceiling fan 1200 mm(category - A ) and regulator including wiring of the down rod of standard length (up to 30 cm) with 1.5 sqmm PVC insulated copper conductor single core cable etc. as required complete in all respects as per direction and satisfaction of engineer in charge complete in all respects. |
| 24 | Providing & fixing 3 pin socketoutlet on the existing switch box/cover including connection etc. as required complete in all respects as per direction and satisfaction of engineer in charge complete in all respects. |
| 25 | Supply and erction of PVC Jointless flat 3 core cable as 12mm sq per BIS 694-1990 (Latest with upto date ammendments ) suitable for the pump set offered from OCB to motor, motor to starter including all other electric equipments such as thimbles, flexible nut & bolt, cable glands etc.laid in pipes or trenches under floor. The type and make will be subjected approval of HPSEBL authoroties in case of non aacceptance by HPSEBL authorities it shall have to be replaced by the tendrer free of cost. |
| 26 | Providing and fixing of Kirloskar/ Kilburn/ IVC/Fouress/ Gled/BHEL/ Leader/Kartar make Cast Steel Double flanged Non return Valve various dia of class-ASA 150 as per relavant IS standards withstand nominal seat pressure 20.00 KG/Cm sqr. Conforming to IS BS :1868/API -600(latest with up to date ammendments if any ) complete in all respects within all leads and lifts as per direction and satisfaction of engineer in charge having following nominal diameters: 100mm |
| 27 | Providing & fixing Cast Iron double flanged sluice valve various dia of Kirloskar /KSB/ Kilburn / BHEL/ Leader make of following dia and class PN- 1.6 capable of with standing nominal seat pressure of 16.00kg/Cm2. (as per IS -780-1984 latest with up to date ammendments if any) complete in all respect as per diection and and satisfaction of engineer in charge .100mm |
| 28 | Manufacturing and supplying of Stair 4 x 0.60 mtr welded to MS angle 25mm x 25mm dia including cutting welding painting with red oxide paint complte in all respects . work should be executed within all leads and lifts as per direction and satisfaction of engineer in charge. |
| 29 | Centrifugal pump set for stage -Ist i/c Automation. Please Enable Macros to View BoQ information |
