|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum. |
| 2 | Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 3 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard |
| 4 | IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 5 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 6 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 7 | Supplying and erecting centering for sides and soffits including supports and strutting upto 3m hight for plane surface such as RCCslab, rectangular beams,etc,. |
| 8 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 9 | Plastering with cement mortar 1:4 (One part of Cement and Four part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 10 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 11 | White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333 |
| 12 | Art work |
| 13 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 14 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 15 | Plain Cement Concrete 1:3:6 (one cement, three crushed Stone Sand (M- Sand) and six coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification. |
| 16 | Supplying And Fixing of Rubber Moulded Grey Premiu...o Full Depth Curing Thread Lining Etc Complete |
| 17 | Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 18 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 19 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum. |
| 20 | Supply & stacking of red earth at site to the depa...tacking and inclusive of all taxes etc., complete. |
| 21 | Supplying and stacking of sand (Supply & stacking...,sharp and angular type free of adherent coatings) |
| 22 | Mixing of red soil, gravel or sand including watering,etc,. |
| 23 | Spreading of red soil, gravel or sand including wa...5 mm thickness - including hire charges of roller. |
| 24 | Planting of Bogainvilla hybrid foilage shrub variety of 30-45cm,etc,. |
| 25 | Planting of Bogainvilla foilage shrub variety of 30-45cm,etc,. |
| 26 | Planting of Caesalpinia pulcherrima foliage shru...vated earth etc as directed by the site in-charge |
| 27 | Supplying and Planting of Cyrtostachys renda Palm variety of Height 180-210cm,etc,. |
| 28 | Supplying and Planting of Caryota palm variety of...vated earth etc as directed by the site in-charge |
| 29 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 30 | Wash Hand Basin of size 550mm x 400mm with allaccessories such as Cast Iron Brackets, 32mm dia CPWaste Coupling, Rubber Plug and Chain, 32mm dia 'B'Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mmdia Nylon Connection, 15mm dia Brass Nipples, 15mm CPPillar Tap etc |
| 31 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12mm thick laid in-situ and pointed with same coloured cement |
| 32 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum |
| 33 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 34 | Pointing with Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), Slabs And Tiles to full depth of Tiles, (Marble slabs, Pressed Tiles, Ornamental tiles) -10 sqm |
| 35 | Supplying and fixing 20mm C.P flush cock. (871B) |
| 36 | SUPPLY OF ONE NO OF 7 MT X 88.9 MM OD X 4.05 MM T... CORE SMC FUSE BOX WITH Hot dip zinc galvanising (EL-13) |
| 37 | Cost of Erection & materials required for 6 mtr St... & flats) (NORMAL SOIL)(Material ratio - 1:1.5:3) (EL-15) |
| 38 | HDPE PIPE OF SIZE 50 MM O.D X 38MM I.D (M-1641) |
| 39 | Labour for laying of cable through HDPE pipe ( 50 ...PIPE (TRENCH SIZE 100mm BREADTH X 150mm DEPTH ) (ED-77) |
| 40 | I.SI.MARKED 3 1/2X25 SQ.MM CABLE(EL-41) |
| 41 | Supply of LED flood light fitting of 120 W to 130 ... replacement guarantee (in place of 250 W MH FL) (EL-102) |
| 42 | Towards cost of Geophysical investigation survey charges. |
| 43 | Drilling of Borewells anywhere in Tamilnaduincluding transportation from one place toanother with in Tamilnadu in alluvial soilsedimentary strata of clay and sand stoneshale pebbles boulders etc. By first takinga pilot bore of 140 mm/150mm dia and thenenlarging to required dia direct or reverserotary mud circulation method using rotaryrigs, fuel, labour and drilling bentonite andwater required for drilling at site ( Site will beshown by the TWAD Board Officers) includingconstruction of mud pit. |
| 44 | Upto 60 m Depth ending below ground level |
| 45 | From 60 m upto 90 m Depth ending fromground level |
| 46 | From 90 m upto 120 m Depth ending fromground level |
| 47 | Supply and delivery of 200mm dia(8”) PVC end cap including cost and conveyance etc., complete |
| 48 | Reaming from 150mm dia pilot bore to 200mm dia size bore as directed by the Departmental Officer, to the required depth up to 60 from Ground level (WD-W0771) |
| 49 | Labor charges for inserting the P.V.C. casing pipes assembly with slots (or) without slots in the drilled holes including joining the pipes etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Municipal Engineer excluding cost of casing pipe etc., complete 200mm dia PVC casing pipe |
| 50 | Charges for developing the bore wells with Air Compressor 600cfm (Minimum 8 hours) including transportation labor and fuel charges for Compressor as directed by the Departmental Officer and conducting yield test by “V” notch method. |
| 51 | Supply and delivery of 200mm dia of (Casing medium) PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification ` |
| 52 | Supply and delivery of 150mm dia of (Casing medium) PVC casing Slotted pipe ( Company Slots) including cost and conveyance at site etc., complete as per standard specification ISI make |
| 53 | Supply and delivery of 150mm dia of (Casing medium) PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification ` |
| 54 | Supply and Fixing of 5 HP Motor Submersible Pump set ISI mark IS 8034Without panel board 75LPM and 60M Head including Fixing Charges and all Charges etc. Complete.(Rate with TNVAT @4% on Basic cost Excise Duty) |
| 55 | Supply and delivery of suitable 3 phase panel board to 5HP with DOL Starter Auto On/Off Switch etc., |
| 56 | Supply and Delivery of 2.50 Sqmm PVC insulated and Sheathed 3 Core flat type copper cable confirming to IS 694/1990 Including all charges with excise duty and handling charges etc |
| 57 | Towards Labour Charges for the errection of Submersible pump set in bore well including fixing and jointing submersible cable with proper clamps up to the starter to riser pipes to the required depth valves erection clamps, pressure gauge up to the exterior of panel board consisting of TPICN switches starter ,Volt meter, Ammeter, three pilot (indicating) Lamps capacitor single Phasing preventor,water level guard and laying and jointing the cables and twin earthing as per IE rules etc., Complete and testing the pump set and trail run for 10 days 2 HP Plat form All round |
| 58 | 50mm PVC Pipe |
| 59 | 25mm Pipe (BD-682 A) |
| 60 | 20mm Pipe (BD-681 A) |
| 61 | 20mm Valve (BD-696) |
| 62 | Tap (BD-870) |
| 63 | Inspection Chamber (BD-714 M1) |
| 64 | For borewell |
| 65 | Supply and delivery and fixing of HDPE tank 2000 litres capacity as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixnig charges as directed by TWAD Board officers etc., |
| 66 | Inspection Chamber (WD - M1423) |
| 67 | For Sewage |
| 68 | Supplying of PVC pipes 110mm dia with ISI monogram(working pressure 6kg/cm2) |
| 69 | For Sewage |
| 70 | 25mm dia valve(MW - M0212) |
| 71 | 40mm dia wheel valve |
| 72 | MODULAR WIRING with 2 x 1.5 sqmm (EL-110) |
| 73 | Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5AFT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for light point / fan point (for electronic regulator) |
| 74 | Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brEak on suitable angle iron frame work with MS cable entry boxes with Earth connection only. |
| 75 | 8 Way Neutral link 15 AMPS (M-1599) |
| 76 | Supply and fixing of 5A/15A 3pin combined flush type wall socket with 15A flush type switch concealed insuitable MS box in flush with wall and covered with 3mm thick hylem sheet |
| 77 | Supply and fixing of 4Feet LED 18W Fitting with LED18Wtube(LowerEnd)complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 78 | Supply and fixing of WT bulk head fitting with guard (Reputed make) (SD - 84) |
| 79 | Supply and run of 1 of No.8 SWG GI wire for earth connection.(SD - 74) |
| 80 | Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor with suitable colour (EL-121) |
| 81 | Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor and making good of the concealed portion with suitable colour (EL-123) |
| 82 | Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor and making good of the concealed portion with suitable colour (EL-128) |
| 83 | Supply and fixing of 8way single pole and neutral MCB sheet steel enclosure distribution board with double door(metal) 1No. 32A DP MC Basin coming and 6Nos. 6A to 32A SPMCB out going inflush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (like standard make) |
| 84 | Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 63 A 4 P MCB as incoming and 24 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only. Lower End |
| 85 | Supply and fixing of 8 way Vertical Triple pole a... as outgoing on wall with earth connection only.(SD -585) |
| 86 | Single Pole 6 A to 32A, 10KA (M-1761) |
| 87 | Double Pole 6 A to 32A,10KA (M-1765) |
| 88 | 100 A F.P MCB ISOLATOR (M-1839) |
| 89 | 25 Amps 30 MA DP RCCB / ELCB(M-1812) |
| 90 | 40 Amps 30 MA DP RCCB / ELCB(M-1813) |
| 91 | 25 Amps 30 MA RCCB/ELCB FP(M-1812) |
| 92 | 40 Amps 30 MA RCCB/ELCB FP(M-1813) |
| 93 | Supplying and erecting in position light duty steel truss including materil and Llabour charges,etc,. (796A) |
| 94 | Painting new iron work two coats with ready mixed ...ISI STD of superior quality and approved colour.. |
| 95 | Supply & Fixing Roofing Sheet (WR - M0058) |
| 96 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 97 | Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 98 | Supply and fixng of TNEB meter board suitable for 3phase 63A service connection made up of suitable angle iron frame work of size 2feetx1-1/2feet using angle iron of size1-1/2\\"x1-1/2\\"x1/4\\" rigidly fixed on wall covered with hylem sheet of size 2feetx1/2feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1No. neutral link, copper earth flat of size 1\\"x1/4\\" with interconnection of EB meter to fuse units by 16Sq.mm PVC insulated copper wire with 1No 63Amp 30MA Four Pole RCD/RCCB (HigherEnd) with suitable necessary connection with earth connection complete |
| 99 | Supply, delivery and fixing of 15 Watts LED Round Type Recessed mounted Down Light (M-3028) |
| 100 | Wiring with 2x4sq.mm. PVC insulated SC unsheathed FRLS copper cable conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mmx100mmx75mm MS switch box for 15A 3pin noninterlocking CSplug with painting of suitable colour with continuous earth wire connection by 4sq.mm copper wire for open power plug point |
| 101 | Supply and fixing of Kiddies Fun Station Height:14...RP tunnel size:3, twin slide:9, paint: pu coating (CPE-30) |
| 102 | Supply of Infiltration Drain Tunnel made of Polyprophlene in the size of 800mm width, height of 510mm length of 1160mm. The capacity of the each drain tunnel shall be 3000 liters and 11kg in weight confirming to BBA IS standard with maximum load of 60 Tonne per sq.mtr etc., complete complying with standard specification. (SWD 39) |
| 103 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum. |
| 104 | Geo Textile-400 Gsm, 200 Microns, white / Grey colour confirming to Australian / Indian Standards (IS 16391:2015 or equivalent (SWD54) |
| 105 | Supply and fixing FRP of 7 of 700 X 700 mm (clear opening 600 X 600 mm)(Grating cover with Frame Medium Duty-30MT) and Supply and Placing of cast-situ /precast Silt catch pit of inner dimension 600 X 600 X 600 mm Including P.C.C (1:4:8), 120mm wall thick RCC including reinforcement and shuttering. (SWD17R) |
| 106 | Supply and Fixing of Eco Block-Rainwater Infltration Module confirming to BBA/IS Standards with max loading rate of 60 tons/sq mtr with insepectionfacility with no plate system with a storage co efficient of 96% etc completed. (SWD-43) |
| 107 | Supply and Fixng of Sidewall for the infiltration module BBA/IS Standards. (End Plate) (SWD-44) |
| 108 | Supply and Fixng of Base plate for mounting modules confirming to BBA/IS standards.) (SWD-45) |
| 109 | Supply and filling of Coarse Filter media machine curshed 20mm size of HBG stone from an approved quarry etc including loading and unloading charge and labour charges etc completed. |
| 110 | Supply and filling of Coarse Filter media machine curshed 40mm size of HBG stone from an approved quarry etc including loading and unloading charge and labour charges etc completed. |
| 111 | Mazdoor employed for Pitting, Trenching, Sampling & Drilling works (PWD Schedule of rate) |
| 112 | Supplying and fixing with new chain link (2”x2”,10 gauge) fencing with RCC post in the with using of 50 x 50 x 6mm M.S. Angle including cost of chain link, binding wire etc., complete. |
| 113 | RMI-8X Pull Chair DoubleFunctions: Developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. Good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.Approaches Sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. Revert slowly.Size:-2187×902×1707 mmMaterial:Pre Galvanized Mild Steel, Material Thickness: 3 mm.Paint:All Weather Double Layer Powder Coated Paint Sealed Ball Bearing, Steel Seats for long lasting life |
| 114 | RMI-10 Air SwingFunctions: By swinging both legs together from side to side the Surfing Board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through “core” activationApproaches: Stand on the pedals and grasp the handles with both hands, swing from left to right.Size:-1177×942×1446mmMaterial:Pre Galvanized Mild Steel, Material Thickness: 3 mm.Paint:All Weather Double Layer Powder Coated Paint Sealed Ball Bearing, Steel Footrest / Foot paddle for long lasting life |
| 115 | RMI- 13Stair Stepper With GliderFunctions: Develops the muscles in legs and waist, strengthening the flexibility and agility of waist.Approaches Hold handles with hands, put your feet on the pedals one by one, and stand on the middle of the pedal; the arms go up and down with the moving handle to keep the waist swinging.Size:-1036×736×1343mmMaterial:Pre Galvanized Mild Steel, Material Thickness: 3 mm.Paint:All Weather Double Layer Powder Coated Paint Sealed Ball Bearing, Steel Footrest / Foot paddle for long lasting life |
| 116 | RMI-21 Arm/Shoulder WheelFunctions: Building up the muscles of upper limbs, enhancing the flexibility and agility of shoulder joint.Approaches:-Hold the handgrips of rotating wheel with both hands and body should roll simultaneously clockwise or counter-clockwise following the wheel.Size:-863×874×1882Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm.Paint: All Weather Double Layer Powder Coated Paint. Sealed Ball Bearing, Steel Seats for long lasting life Please Enable Macros to View BoQ information |
