|
| 1 | Earth work excavation for pipe line trench work in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and bailing out water wherever necessary and refilling the sides of foundation with excavation earth in layers of not more than 15cm thick will rammed and consolidated with initial leads and lists etc including leveling the sites complete complying with standard specification and as desired. |
| 2 | Desilting light or sandysoil or silt from infiltration wells below water level including the charges for special T&P and air compressor etc. complete.-well 1&4(infiltration) |
| 3 | Supply and delivery of followings water specials materials all labour charges etc complete-70 mm L.T. CABLES 3,3.5,4 CORE 1.1 KV GRADE ARMOURED ALUMINIUM CONDUCTOR CROSS LINKED POLY ETHYLENE INSULATED PVC SHEATHED CABLES CONFORMING TO IS 7098 (PART I)/1988 AND AS AMENDED THEREAFTER WITH ISI MARKING |
| 4 | Supply and delivery of followings water specials materials all labour charges etc complete-110MM HDPE PIPES - PE 100 AS PER IS 4984/2016 |
| 5 | Supply and delivery of followings water specials materials all labour charges etc complete-80MM G I PIPES (MEDIUM) AS PER IS 1239/PART I/2004 |
| 6 | Supply and delivery of followings water specials materials all labour charges etc complete-G.I. SPECIALS AS PER IS 1239/ PART 100 mm x 80 mm Reducer |
| 7 | Supply and delivery of followings water specials materials all labour charges etc complete-80MM G.M. Gate valves |
| 8 | Supply and delivery of followings water specials materials all labour charges etc complete-80MM G.M. Non Return valves |
| 9 | Supply and delivery of followings water specials materials all labour charges etc complete-80MM GI Bend |
| 10 | Supply and delivery of followings water specials materials all labour charges etc complete-80MM GI Coupling |
| 11 | Supply and delivery of followings water specials materials all labour charges etc complete-Rubber Sheet 5mm thickness- |
| 12 | Supply and delivery of followings water specials materials all labour charges etc complete-20mm dia and above x 90mm to 120mm length fully threaded bolts and with nuts 2 Nos. |
| 13 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.-75x100 ( lpm x m) 1&4 |
| 14 | Supply and delivery of Star-Delta starter confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/ Three Phase/50HZ (+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 Nos., CT operated Ammeter (65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector switch, Miniature circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately).-7.5 H.P |
| 15 | Lowering pipes and specials to trench and laying to proper grade and alignment joining with PVC couplers complete complying with standard specification -110MM HDPE PIPES - PE 100 AS PER IS 4984/2016 |
| 16 | Lowering pipes and specials to trench and laying to proper grade and alignment joining with PVC couplers complete complying with standard specification-70mm CABLE LAYINGFor laying below GL including earth work |
| 17 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.-Above 5.00 HP to 10.00 HP |
| 18 | Refilling the excavated earth work into pipe line trench etc., including all labour charges for filling, Watering ramming and consolidation etc., complete |
| 19 | G.S.T 18 % Please Enable Macros to View BoQ information |
