|
| 1 | Providing Fire & Safety arrangements |
| 2 | OD453753/2025-2026:Supply, installation, testing and commissioning of TerracePump rated for 450 lpmat 20Mheadhigh efficiencyvolutetypewithcast ironcasingmonoblock tyoetotallyenclosedfancooledwithsupplycondition 415V, 3phase, 50HZ, footmounted type rated for suitable 5 HP at 2900 rpm |
| 3 | OD453751/2025-2026:Fabrication, supply, conveyance , testing and commissioning of fire fighting motor control panel with 2 mm MS sheet, PO red synthetic enamel paint, suitable for electric terrace pump of 450 lpm 35 mtr head, starter, switch gear, for Auto Manuel operation including appropriate capacity MCB , contactor, overload relay, ON/OFF illuminating push button with necessary add on NO/NC contacts and elements ,3 phase volt meter with selector switch , RYB phase indication lamps with necessary back up fuse protection, cable in/out etc. complete as per Fire and Rescue Department standards. |
| 4 | 18.14.3:Providing,installation,testing and commissioning of non-return valve of following sizes conforming to IS :5312 complete with rubber gasket, GI bolts , nuts, washers etc as required.65 mm dia |
| 5 | OD453750/2025-2026:Supply and fixing of Pressure gauge with all necessary accessories. Make: H-Guru/Waaree or equivalent |
| 6 | 18.22:Providing and fixing of pressure switch in MS pipeline including connection etc as required: |
| 7 | OD453754/2025-2026:Supply, installation, testing and commissioning of approved make 25 mm dia automatic air release valve as required |
| 8 | OD453758/2025-2026:Supply, Installation, Testing and Commissioning of forged CI Ball valves (PN 25) with fittings of screwed end type. 20 mm dia as required |
| 9 | 18.11.5:Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze or gun metal seat duly ISI marked complete with nuts, bolts ,washers ,gaskets conforming to IS 13095 of following sizes as required:100 mm dia |
| 10 | 18.18.2:Supplying and fixing 63 mm dia gun etal short metal branch pipe ith 20 mm nominal interanal diameter size nozzle conforming to IS 903 suitable for Instantaneous connection to Interconnect hose pipe coupling as required:Stainless steel (Grade 304) |
| 11 | 18.9.2:Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal or stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290(Type A) with blank Gun metal or Stainless steel cap and chain as required:Single headed stainless steel |
| 12 | 18.7.7:Providing, laying, testing and commissioning of C class heavy duty M S Pipe conforming to IS 3589,IS 1239 i/c welding ,fittings, like elbows, tees, flanges, tapers, nuts ,bolts ,gaskets etc., and fixing the pipe on the wall , ceiling with suitable clamp or support frame and painting with two or more coats of synthetic enamel paints of required shades complete as required:100mm dia |
| 13 | 18.14.5:Providing,installation,testing and commissioning of non-return valve of following sizes conforming to IS :5312 complete with rubber gasket, GI bolts , nuts, washers etc as required.100 mm dia |
| 14 | 18.17.1:Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a) 20 mm nominal Internal dia water hose thermoplastic(Textile reinforced) type-2 as per IS:12585b) 20 mm nominal internal dia gun metal globe valve &nozzlec) Drum and brackets for fixing the equipments on wall.d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m |
| 15 | OD453744/2025-2026: Supply, installation, testing and commissioning of controlled percolated hose in 15 M length of 63mm dia and tested to bursting pressure of 15kg/sqcm GI wire binded with Aluminium coupling as per IS:901 |
| 16 | OD453742/2025-2026:Supply and fixing of hose box with double-hinged door with glass front arrangements including PO red painting. flanges, nuts, rubber gaskets and bolts complete - Double hose box . Make : Friends/Capitalgains /equivalent make |
| 17 | OD453740/2025-2026:Supply, installation, testing and commissioning of fire extinguishers of capacity 6Kg ABC type complete. With ISI Mark as per IS:15683 . Make : Safepro / Safex |
| 18 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 19 | 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm |
| 20 | 17.5.4:Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. |
| 21 | 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm |
| 22 | 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm |
| 23 | 1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm |
| 24 | 90.12.7.40:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp |
| 25 | 9.1.32:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 26 | 2.10.4:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Triple pole |
| 27 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 28 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 29 | OD453741/2025-2026:Supply and fixing 60 mm long x 12 mm wide x 1 mm thick Copperearthing clips for 4 sq mm to 16 sq mm. single compression glands |
| 30 | OD453743/2025-2026:Charges for core cutting suitable hole on RCC sump tank for connecting 100 mm C class GI pipe for fire pump, Fixing the pipe and filling the gap with suitable water proofing compound/Cement Concrete, including material labour and Rental charges etc as required. |
| 31 | OD453757/2025-2026:Supply and Installation of self-glowing type double side Sign Boards made out of 3mm thick "Opaque" PVC foam board having minimum SIZE:- 100 X 300 MM.Double side signages with 'FIRE EXIT' /EXIT'/ FIRE DUCT'/ FIRE EXTINGUISHER' /MANUALCALL POINT" /NO SMOKING'/ etc as required |
| 32 | 14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels. |
| 33 | 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels |
| 34 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 35 | OD461784/2025-2026:Supply of 1 phase 1.5 HP/1.119 KW. Open well submersible pump set capable to discharge 1.40 LPS of clear water to a head 80 M. suitable to work with 240V,50HZ,A.C supply including of all taxes.Makes prefared :- Kirloskar-KOS1.540 Or equ / Texmo / Deccan brands |
| 36 | OD461785/2025-2026:Submersible pump controllers with ammeter,volt meter,SPP,for single phase 1.5 H.P submersible motor pumps (MR-G2 DOL/ equivalent make) |
| 37 | OD461787/2025-2026:Supply and providing good quality garware make nylon marine rope 28 mm size with required PVC tie-band the pump set with required outside the well |
| 38 | OD461789/2025-2026:Supply and providign 50 mm dia PVC Pipe 10 kg per sqcm as suction pipe |
| 39 | OD461791/2025-2026:Supply and providing 50 mm size GI bend in position with accessories as required |
| 40 | OD461793/2025-2026:Supply and fixing 50 mm size GI coupling in position as required |
| 41 | OD461819/2025-2026:Supply, providing ad fixing 50 mm size GI union coupling in position with accessories as required |
| 42 | OD461820/2025-2026:DP enclosure for independent mounting of MCB |
| 43 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 44 | 90.6.6.1:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.1.50 sq mm |
| 45 | OD461884/2025-2026:LS amount for 1500L RCC/PVC over head tank |
| 46 | OD453747/2025-2026:Preparation of drawings/ schemes/ documents and getting final approval/ sanction/ NOC from Kerala Fire Force Department as per rules and regulations (Only statutory fees will be borne by the owner/Department ). Please Enable Macros to View BoQ information |
