Tender For Repairing And Maintenance Work Of Contai-Junput Road From Ch. 4.50 Kmp To 5.00 Kmp And Ch. 7.00 Kmp To 8.00 Kmp By Repairing Potholes, 20 Mm Premix Surface And Premixed Seal Coat (Type-B) In Patches Under Contai Sub-Division In The Dist. O, Contai-West Bengal
TDR : 54593162
Tender Notice
BOQ
Expired
Contai
West Bengal
Tender For Repairing And Maintenance Work Of Contai-Junput Road From Ch. 4.50 Kmp To 5.00 Kmp And Ch. 7.00 Kmp To 8.00 Kmp By Repairing Potholes, 20 Mm Premix Surface And Premixed Seal Coat (Type-B) In Patches Under Contai Sub-Division In The Dist. O
Name of Work:- Repairing and Maintenance work of Contai-Junput road from ch. 4.50 kmp to 5.00 kmp and ch. 7.00 kmp to 8.00 kmp by repairing Potholes, 20 mm Premix Surface and Premixed Seal Coat (Type-B) in patches under Contai Sub-division in the Dist. of Purba Medinpur during the year 2025-26.
Sl. No.
Item Description
1
Repairing pot-holes and making up small depressions with ramming or power rolling including screening, cleaning chips or metals and washing, drying as necessary and eating the chips or metal where necessary, cutting pot holes to regular shapes with vertical edges, cleaning the disintegrated materials, heating matrix and applying tack coat including sides), finishing the top of repaired surface levelled with adjoining area, including cost and carriage of stone aggregates and matrix, excluding cost of applying tack coat. [Tack coat is to be considered separately] i) With premixed Chips or Bajrees with 54 kg of bitumen per m3 of loose net volume of stone chips using concrete mixer machine. (The payment is to be made on the basis of loose net volume of stone materials consumed in the work) (i) Using Mobile Hot Mix Plant (Light duty) Using Pakur Variety Stone materials 22.4 mm size 60% and 11.2 mm Size 40% (a) Over Bituminous Surface Area of potholes/small depressions Area taken from Measurement sheet and thickness volume of pot holes/small depressions Total volume of potholes/ small depressions
2
Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone gregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the mixture uniformly over the surface, including line, grade and level to serve as wearing course on a previously prepared base, including mixing in Mobile Hot Mix Plant (Light Duty) and thoroughly rolling with a smooth wheeled roller 8-10 tonne capacity, inished to required level and grades including the cost and carriage of stone chips and matrix, heating the matrix, preheating the aggregates to required temperature and including the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD. Area taken from measurement sheet Total area of prmix surfacing
3
Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure uniformity, followed by rolling with power roller including the cost and carriage of binder and aggregates, cost of heating the binder and aggregates and all other incidental charges, cost of fuel and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of Mort &H (5th Revision). By mechanical means (i) With Hot Bitumen Binder @ 6.80 kg/ 10 sqm. For Repairing Potholes over premixe surfacing
4
Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, listening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications or Road & Bridge Works of MoRT&H (5th Revision). (i) On Bituminous Surface (Using Bitumen Emulsion at the rate of 0.20 to 0.30 kg per sqm. For Repairing Potholes For premix surfcing
5
Add 18% extra in respect of GST on all items, on Rs.404861.00
6
Add 1% extra in respect of Labour Welfare Cess on items no. 1 to 5 on Rs.477736.00 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
