|
| 1 | Supply only of 1.1KV grade XLPE/Armoured AL. LT cable as below : (Make - Finolex/Polycab/Havells/RR Kabel/Gloster).i) 4 core 25 sq mm.[VTPN DB TO TPNDB] |
| 2 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. |
| 3 | Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.i). From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. |
| 4 | Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire.i). Up to 50 sqmm |
| 5 | Connecting the equipments to earth busbar including S & F 8 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. |
| 6 | Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.With 25x25x3mm angle iron supporti). 200x50x1.25mm (18SWG). |
| 7 | Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.i). 200x50x1.25mm (18SWG). |
| 8 | Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.i). 200x50x1.25mm (18SWG) |
| 9 | Supplying and fixing double door Horizontal-TPN-MCB DB with IP-43 protection, concealed in wall after cutting the wall & mending good the damages to original finish & necy. wall matching putty & paint as required or total establishment on angle iron frame on wall incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.#[Make : Legrand /Siemens/Schneider Make]#i).6 Way Enclosure... |
| 10 | Supplying and fixing double door SPN-MCB DB with IP-43 protection, concealed in wall after cutting the wall & mending good the damages to original finish & necy. wall matching paint as required or total establishment on angle iron frame on wall incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. #[Make : Legrand /Siemens/Schneider Make]#i).2+8 way Enclosure... |
| 11 | ii).2+16 way Enclosure... |
| 12 | Supplying and fixing 240/415V, following rating MCCBs & MCBs (Legrand Make) of Breaking capacity 10kA for MCBs & 35kA for MCCBs & \\"C\\"characteristics on existing din rail for newly installed DBs and necessary connection as required. #[Make : Legrand /Siemens/Schneider Make]#i).40A DP MCB Isolator. |
| 13 | ii).63A FP MCB Isolator. |
| 14 | iii).6-32A(10kA) SPMCBs. |
| 15 | iv).40A/63A (10kA) TP MCBs. |
| 16 | Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., includingsupplying sockets, tapes.................i).1.5 sq mm. [For Computer board & Power Point& existing S.B] |
| 17 | ii).2.5 sq mm. |
| 18 | iii).4.0 sq mm. |
| 19 | iv).6.0 sq mm. |
| 20 | Cutting Channel of size (40mm x 40mm) & (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm & 19mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles........i).[19 mm dia and 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire]. |
| 21 | ii).[25 mm dia and 3 mm thick polythene pipe with 1x14 SWG GI earth continuity wire]. |
| 22 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/Havells/RR/Poly-Cab) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required........... [Charging the existing Modular S.B] i).3 x 22/0.3 (1.5 sqmm). |
| 23 | ii).2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC. |
| 24 | ii).2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) as ECC. |
| 25 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm/32mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.i). 2x22/0.3(1.5sqmm)+1x22/0.3(1.5sqmm) ECC. |
| 26 | ii). 2x36/0.3(2.5sqmm)+1x22/0.3(1.5sqmm)ECC. |
| 27 | iii). 2x84/0.3(6sqmm)+1x 56/0.3(4sqmm) ECC. |
| 28 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish2x22/0.3 (Ph. & N) and 1x22/0.3 as ECCi). i). [Average run 8 mtr]. |
| 29 | ii). [Average run 10 mtr]. |
| 30 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed]i).[Average run 8 mtr]. |
| 31 | ii).[Average run 10 mtr]. |
| 32 | iii).[Average run 12 mtr]. |
| 33 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make)[for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed]i).[Average run 10 mtr]. |
| 34 | ii).[Average run 12 mtr]. |
| 35 | Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.i). On Board. |
| 36 | Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch (Brand approved by EIC) & 1 nos. 16 A, 3 pin Modular type plug socket with 1 nos. 16A Modular type switch, without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works incl. making necy. connections as required. |
| 37 | Supply & Fixing 240 V, 2 nos. 6 A, 3 pin Modular type plug socket with 2 nos. 6A Modular type switch (Brand approved by EIC), without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall for housing the board after cutting the brick wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 38 | Supply & Fixing 240 V, 2 nos. 16 A, 3 pin Modular type plug socket with 2 nos. 16A Modular type switch (Brand approved by EIC), without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall for housing the board after cutting the brick wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 39 | Supply and delivery of commercial type indoor mounting rail only complete with all access. [PHILIPS-TMC 502-22W / Crompton Attitube Pro CIS 340 & 341/Eqv Bajaj Model].i). SINGLE LED tube light frame. |
| 40 | ii). DOUBLE LED tube light frame. |
| 41 | supply and delivery of 1No. 4', 20W LED Tube]. [Philips: Master Led Tube 1200mm 18W-865 T8 IND -2100 lumen/ Crompton Asto Pro TCS-726/ Eqv Bajaj Model] for above tube frame fittings. |
| 42 | Fixing only single /twin LED tube light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener & flexible cord. |
| 43 | Fixing only LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F E.I conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and necy enamel painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. |
| 44 | Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. |
| 45 | Supply & fixing of Recessed mounted LED Down light with extruded aluminium housing and milky diffuser on existing false ceiling,the false ceiling should be cut as needed size ,if break the false ceiling then should be change it on an urgent basis. and the luminaries should be bounded with GI wire(4 side)properly from the trust as per direction of EIC and making necy. connections as required of the following specification. i). 60 Watt,240V, 6250 lumen, 5700K. [Crompton Polaris CCR- 145-60-57-SL-NWH/ Eqv Philips Make/EIC Approved].(2ftx2ft grid luminaries) |
| 46 | ii). 50 Watt,240V, Minm 5000 lumen, 5700K. [Crompton Fame Spot CDR-215-50-57-SL-NWH/ Eqv Philips Make/EIC Approved].Spot Focus Light. |
| 47 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 12 watts LED lamp complete set. |
| 48 | S/F 12 watt Inverter LED Lamp (B22 base CDL) In the existing Holders. (Philips /Havells make) . |
| 49 | Supplying & Fixing 240 V AC/DC superior type Multitune ( min 10 nos. tune) Call Bell (Anchor) with selector switch for single/Multi Tunes mode, Battery operated on HW board incl. S&F HW board. |
| 50 | Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mmx 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991). |
| 51 | Supply & Delivery of 48\\",1200mm,230volt single phase AC ceiling fan incl. All acessories (blades,canopy,fork, rubber bush etc.)& the capacitor of the fan should be P-2 type burst proof & must have safety wire/rope directly from fan hook to stator of the ceiling Fan.[USHA STRIKER NEO HI-SPEED ISI 1 STAR/ Eqv. Havells /Orient Model]. |
| 52 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 53 | Extra for supplying additional wire and down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire. |
| 54 | Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.[For New & Existing Fan] |
| 55 | Supply & Delivery of following spec,230volt,metal body heavy duty, industrial grade exaust fan complete with all accessories. [EPC Heavy Duty/Havells Turboforce Exaust 1phase].i). 9\\",230V,50Hz,1370rpm,40watt. |
| 56 | ii). 12\\",230V,50Hz,1420rpm,80watt. |
| 57 | Fixing only AC Exhaust Fan for Toilet use of 230mm/ 300mm sweep after making hole in wall and making good the damages and smooth cement finish etc. as practicable as possible and providing necessary length of PVC insulated wire and making necy. connection with flexible cord.i). 9\\"(inch),230mm. |
| 58 | ii). 12\\"(inch),300mm. |
| 59 | Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long).i).For 9\\"(inch),230mm Ex-Fan. |
| 60 | ii).For 12\\"(inch),300mm Ex-Fan. |
| 61 | Supply and Delivery of 230V, 50Hz,1400 rpm AC Air bracket Air circulator 4 Blade industrial grade wall Fan with necy. Allied all items.450mm(18inch),85W.[EPC Make/Havells Turboforce Wall]. |
| 62 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts &washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. |
| 63 | Supply & Delivery of Heavy Duty fully Metal body 4-Blade industrial grade Pedestal Fan of following Sizes :[EPC Make/Havells Turboforce Pedestal] i). 450mm/18'' |
| 64 | Dismenteling the existing distribution boxes,wiring, Concealed switch board, Concealed type JB,Panel related all acessories light fixtures and fittings etc. and mending good the damages to the original finish by neat cement concrete mixture & neccy. plaster cover with 1.5mm thick wall putty as existing wall matching as required.[For G+4] |
| 65 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.i).For 4 core 25 sq mm. |
| 66 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :i).For 4 core 25 sq mm. Please Enable Macros to View BoQ information |
