Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Item Wise BoQ BoQ_Ver3.0 Item Wise Normal INR Only INR Select, Excess (+), Less (-) Tender Inviting Authority: District Magistrate & Collector, North Tripura Name of Work: Providing ergonomic tunkey key solution Conference Hall comprising of modular furniture solutions for newly constructed Office building of the DM & Collector, North Tripura District DNIT No: e-DT 08-/Providing ergonomic tunkey key solution Conference Hall comprising of modular furniture solutions Annexure /DM/N/2025-26 dt. 10/03/2026 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Item No. Item Description Item Code / Make quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate (Quoted Rates per unit (in Rs.) incl. all taxes & charges as applicable, loading, unloading stacking, counting, carrying, fitting & fixing charges up to delivery at worksite as per the direction Excise Duty inRs. P GST inRs. P Freight Charges ( Unloading & Stacking) inRs. P Any Other Taxes/Duties/Levies inRs. P Other Taxes 2 inRs. P IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax inRs. P Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category inRs. P TOTAL AMOUNT Without Taxes inRs. P Amount (Col-4 X Col-13) TOTAL AMOUNT In Words |
| 2 | 165 Seater Conference Table, size: Desk 1 14348 (W) x 2350 (D) x 750 (D) mm. Desk 2 14348 (W) x 2350 (D) x 750 (H) mm. Desk 3 13496 (W) x 600 (D) x 750 (H) mm. Desk 4 13496 (W) x 600 (D) x 750 (H) mm.----Work Surface: Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty Panel: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. |
| 3 | 165 Seater Conference Table, size: Desk 1 14348 (W) x 2350 (D) x 750 (D) mm. Desk 2 14348 (W) x 2350 (D) x 750 (H) mm. Desk 3 13496 (W) x 600 (D) x 750 (H) mm. Desk 4 13496 (W) x 600 (D) x 750 (H) mm.----Work Surface: Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty Panel: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. |
| 4 | Office Table, size: 1350 (W) x 750 (D) x 750 (H) mm.----Worksurface:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998with 0.4 mm PVC membrane pressed on to top.Gromet provided on work surface for wire management.Modesty Panel:Made of 25 thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Understructure:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Hinge door storage:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Handle is provided for ease of opening.Storage is provided with cam lock for security. Size: 1350 (W) x 600 (D) x 750 (H) mm. |
| 5 | Judge Table, size: 1650 (W) x 750 (D) x 750 (H) mm.----Worksurface:Made of 25 mm thick MDF - one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Softclosing access flap with in-build power box are provided on work surface for wire management.Modesty Panel:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Understure:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Drewer fronts made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILEtype which uses powder coated 400 mm long metal panel drawer slides.Drawer extension is 325 mm.Drawers have a soft closing & anti slam mechanism.Handles are provied for ease of opening.Pedestal is provided with lock for security. Size: 1650 (W) x 750 (D) x 750 (H) mm. |
| 6 | PUBLIC CHAIR----The seat and back are made from chemically treated and seasoned wood,upholstered with plywood, black leather-cloth, and U-foam.BACK SIZE:46.0cm (W) x 27.0cm (H).SEAT SIZE:46.0cm (W) x 40.0cm (D).The armrest tube is made of M.S. E.R.W. tube dia. 2.54cm. (1”) x 16BG thick and powder coated.The armrest is gas-assisted injection moulded from black Polypropylene.The understructure assembly is a cantilever type frame made of dia.2.54cm. (1”) x 14BG. thick M.S. E.R.W. tube and powder coated. |
| 7 | L Shape Sofa----Total Number of Seats in the Sofa Set: 5. Frame Covering: Fully Upholstered. Backrest Cushion Material: Foam. Density of Cushion of Backrest Material (Kg/Cubic M): 35. Covering Material for Seat and Backrest: Fabric. Frame Structure Material and size (±1 mm): 18 mm thick Teak Plywood. Seat Cushion Material: Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M): 26. Type of Spring in the Base / Seating: Zig Zag spring. Length of Two Seater Units in mm (±10 mm): 1750. Length of Three Seater Units in mm (±10 mm): 2250. Depth of Sofa Units in mm (±10 mm): 800. Sofa Height (Without Back Cushion) ±5 (mm): 430 millimeter. Sofa Height (With Back Cushion) ±5 mm: 775 millimeter. Seat Cushion Length ±5 (mm): 640. Seat Cushion Width ±5 (mm): 510. Seat Cushion Thickness ±3 (mm): 75. Backrest Cushion Length ±5 (mm): 1050. Backrest Cushion Width ±5 (mm): 508. Warranty: 1 - Year. |
| 8 | Steel Storage, size: 1830 H x 914 W x 463 D----Size:915 mm (W) x 486mm (D) x 1981* mm (H).Construction & Material:Welded construction.0.8 mm thk CRCA for Shelf & 0.9 mm thk CRCA for all other components.Door:Glasses fitted to full height steel frame.Locking:2 way locking mechanism with shooting bolt.Handle :Chrome plated brass handle.Shelving :Height wise Adjustable Shelves 4 Nos.Uniformly Distributed Load Capacity per full shelf is 80 Kg maximum.Leveler:M10 Screw type leveler with hex plastic base.(add 10mm to unit height and additional 10mm for adjustment.).Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). |
| 9 | Steel Storage, size: 1830 H x 914 W x 463 D----Size: Plain : 900 mm (W) x 450 mm (D) x 1830 mm (H).Construction & Material:Rigid Knock down construction.Prime Quality CRCA Steel - Panels from 0.6 mm thick & Front frame, Shelf 0.8 mm thick.Configuration (Door):Full height Steel Hinged Door.Locking & handle :Plastic Recessed Handle cum Cam Lock 3 way locking mechanism with shooting bolt arrangement.Shelving :Height wise Adjustable Shelf Mounting Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Plain : 4 Nos. of Adjustable Full Shelves.Top Plain : Metal Top.Finish § Epoxy Powder coated to the thickness of 50microns (+/-10). |
| 10 | Executive Desk with Return Desk, size: 3000 (W) x 900 (D) x 750 (H) mm.----Main Material:Particle Board with the density of 680 kg / m³.Surface:CPL (Continuous Pressure Laminate) in 0.5 mm thickness. Process:Postforming in DuckNosed Profile.Edging:2 mm PVC Edging, Black color.Table Top: 25 mm MFC (Melamine Faced Chipboard), plus 30 mm.MDF (Medium Density Fiberboard) black pad.Modesty Panel:18 mm MFC.Leg:25 mm MFC, plus 30 mm MDF right and left pad.Free standing return desk:Table Top:25 mm MFC.Modesty Panel:18 mm MFC.Leg:25 mm MFC, plus 30 mm MDF right and left pad.Pedestal:Top Panel:25 mm MFC,All Other Panels:18 mm MFC,Lock,Castors: Provided,Handle:Metal. Credenza:Top Panel:25 mm MFC,Door Panels:18 mm MFC,All Other Panels:18 mm MFC,Handle:Metal.Wardrobe:Top Panel:25 mm MFC.Bottom Panel:25 mm MFC,Wood Door Panels:18 mm MFC.Glass Doors:5 mm.All Other Panels:18 MFC.: 18 MFC Handle:Metal.Joining Top:Top Panel:25 mm MFC.Leg:Metal. Size: Main Desk: 1800 x 900 x 750, Joining Table: 1200 X 1050 X 750. Return Desk: 1200 X 600 X 730. |
| 11 | Main High Back Chair----The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with leatherette and moulded high resilience (HR) polyurethane foam of density 45±2 kg/m³,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.Seat Size: 47.0 cm. (W) x 48.0 cm. (D).The cushioned back is made of PU foam with insitu molded MS E.R.W round tube of size 1.9±0.03 cm x 0.16 ± 0.0128 cm.It upholstered with leatherette.High Bck Size: 47.7 cm (W) x 76.4 cm (D).The armrest top is moulded from polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest support made of Ø 3.81 ± 0.03 cm x 0.2 ± 0.01 cm thk M.S. E.R.W. tube having chrome plated finish.The armrest height adjustable up to 6.5 ± 0.5 cm in 5 steps.The adjustable tilting mechanism is designed with the following features:360° revolving type.Front-pivot for tilt with feet resting on ground and cntinuous lumber support ensuring more comfort.Tilt tension adjustment can be operated in seating position.5-position tilt limiter giving option of variable tilt angle to the chair.Seat/back tilting ratio of 1:2.The mechanism housing is made up of HPDC aluminium black powder coated.Seat depth adjustment is integrated in the seat through a sliding mechanism.Seat depth adjustment range is of 6.0±0.5 cm.Back frame is connected to the UP/DN mechanism housed in plastic T spine.It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors.The pedestal is 65.0 ± 0.5 cm.pitch-center dia.5 nos. twin wheel castors are injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal. |
| 12 | 3 Seater Steel Lounge Chair----The seat shell is a welded assembly of seat,back and side frame.The seat and back are made of 0.12 ± 0.013 cm thk CR steel sheet with oblong perforations.They are welded to sideframe of size 3.2 ± 0.05 cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly is powder coated.The seat has a front water fall edge to provide popliteal clearance for comfortable seating.It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back.Clean and flat surfaces of seat and back aids in easy maintenance.Sear size:47.8 cm (W) x 44.6 cm (D).Back size:41.6 cm (W) x 23.0 cm (H).Understructure assembly consists of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5 ± 0.03 cm x 0.2 ± 0.016 cm thk.The welded structure assembly is powder coated.The leg assembly is fitted with shoes and levellers in nylon.The leg structure is designed with minimal area of contact close to ground providing easy access for cleaning purposes.The shoes fitted to leg assembly help in aligning the structure for back to back arrangements.Levellers take care of uneven flooring.Connecting beam is fitted with snap locking end cap.It also aids in side-by-side understructure alignment. |
| 13 | 12 bodies Movable Storage System, Size: 1200 (W) x 5600 (D) x 1980 (H) mm.----Optimizer Plus Storage System is an efficient space saving arrangement catering to a variety of office storage requirements. Each of above configurations can have following type of blocks : i) Static Drive (SD), ii) Last Drive (LD), iii) Twin Drive (TD). Rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block consists. Each unit has 5 loading levels formed by 6 loading levels with 5 nos. adjustable shelves for 2361 mm. Height body.Body units are mounted on an understructure which is fixed or moving. Front Cover: It is the foremost panel of the body on which the handles Drive unit (Drive Type) are fixed. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Cover: It is the backmost panel of the body and is the mirror image of the front cover. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Panel: The back panels are made of 0.6 thk. CRCA Steel conforming to IS: 513 Gr.D. There are two back panels – Top back panel and Bottom back panel. The two back panels are fixed together using machine screws. The purpose of the back panel is to act as a divider between 2 opposite shelves in twin body. Shared Panel: The shared panel acts as a partition between two adjacent bodies. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Tie rod assembly: The tie rod assembly acts as a substitute to the back panels (only in twin body). Optimizer Height for ground for 2361H body is 2502.5mm (2361 body + 80 understructure + 61.5 channel system). Finish: The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Storage capacity per shelf: The shelf is 1180mm in length and can hold up to 13 nos. of box files of size 85mm x 345mm x 285mm (Approx 100 kg/UDL. Understructure: The Understructure is a welded frame suitably fabricated to bear the loads based on configuration. All the components are made of HR sheet 3 mm thk. conforming to IS:2062. The understructure, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns. The handwheel is connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body. The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Centralized Locking: Each Drive type unit has a Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. A centralized locking arrangement is also provided on drive unit cover. A cam lock and lever arrangement is fitted on the drive unit cover of the last movable body, i.e. (LD). |
| 14 | Centre Table, size: 1000 (W) x 600 (D) x 450 (H) mm.----Table Top Material Type: Particle Board. Availability of Table top edge: Yes. Thickness of Table Top Edge (Tolerance ±5 mm): 25 mm. Length of Table Top (Tolerance ±50 mm): 1500 mm. Depth of Table Top (Tolerance ±20 mm): 800 mm. Material Type of Table Understructure: Wooden/Engineer Wood Understructure. Support Type of Table Understructure: Leg. Material of Table Understructure: Particle Board. Thickness of Wooden Leg / Gable (Tolerance ±2 mm): 18 mm. |
| 15 | Chair With Arm----SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR SLED BASE CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube. ARMREST : The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame. SHOE : The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular frame. Felt is provided below the shoes. |
| 16 | Desklet Chair----SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. Desklet support frame is made from Ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and welded to main frame. SHOE : The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular frame. Felt is provided below the shoes. QUARTER DESKLET: The 'L' shape desklet is made of 1.8 ±0.05cm. thk. pre-laminated particleboard with 0.2 ± 0.05cm. thk. injection moulded PolyPropylene all around. Desklet has Front and back adjustment of 8.0 cm ± 0.5 cm. OUTER DIMENSION: 31.5±0.1cm. (W) X 47.0±0.1cm. (D). |
| 17 | Steel Storage, size: 1830 H x 914 W x 463 D----Size:Plain (4S) - 916 mm (W) x 486 mm (D) x 1981 mm (H),Construction & Material:Welded construction.0.8 mm thk CRCA for Back, Shelf & 0.9 mm thk CRCA for all other components.Configuration (Door):Full height Steel Hinged Door.Locking & handle :Mazak Handle.3 way locking mechanism with shooting bolt arrangement.Shelving :Height wise Adjustable Shelf Mounting.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Plain 4S : 4 Nos. of Adjustable Full Shelves.Leveler:M10 Screw type leveler with hex plastic base.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). |
| 18 | 3 Seater Sofa----Overall Size :Width : 181m Depth : 78cm Height : 81.5cm Seating Height : 38cmUpholstery:Material : PVC .Shade : Black ,Thickness : 1 mm ,Weight (GSM) : 575 ,Tear strength (kg/5cm) : wrap : 34.1 weft : 19.78 ,Breaking strength (Kg/cm2): wrap : 3.92 Kg weft : 2.59 Kg ,Adhesion of coating kgf/5cm : warp : 3.05 Kg weft : 3.02 Kg , Colour Fastness to Rubbing (Dry/Wet) (scale 1-5) : Dry = 3 Wet = 3 Frame :Material : Pine Wood , Moisture content : 10 -12 % ,Thickness of Plywood used : 12 mm & 18 mmSeat Foam :Material : Slab stock ,Density : 32 kg/m3 at seat and 28 kg/m3 at backWebbing : Material : Nylon Thickness : 2 mmLegs Material : PVC with 4 mm bush. |
| 19 | Executive Desk with Return Desk, size: 1500 (W) x 750 (D) x 750 (H) mm.----Unitized desk series is a minimal but comprehensive manager desk range designed for a variety of applications and layouts. The range has 5ft and 6ft wide L-shaped manger tables with pedestals. Main Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs: Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members: Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Return Cross Members: Return Cross Member in Unitized T-2 Desk Series is made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). Return Cross Member is assembled by friction fit PDC joinery and grub screws at one end and 3mm thick HR plate welded at other end. There is one return cross member for one table. Access Flap: Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Size: 1500 (W) x 750 (D) x 750 (H) mm. & ERU: 900 (W) x 450 (D) x 750 (H) mm. |
| 20 | Executive Desk with Return Desk, size: 1800 (W) x 750 (D) x 750 (H) mm.----Unitized desk series is a minimal but comprehensive manager desk range designed for a variety of applications and layouts. The range has 5ft and 6ft wide L-shaped manger tables with pedestals. Main Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs: Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members: Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Return Cross Members: Return Cross Member in Unitized T-2 Desk Series is made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). Return Cross Member is assembled by friction fit PDC joinery and grub screws at one end and 3mm thick HR plate welded at other end. There is one return cross member for one table. Access Flap: Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Size: 1800 (W) x 750 (D) x 750 (H) mm. & ERU: 900 (W) x 450 (D) x 750 (H) mm. |
| 21 | Revolving Chair ----SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. HIGH BACK SIZE: 51.5 cm. (W) x 82.0 cm. (H). SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : Up-Down adjustment–7 steps (7.0 ± 0.5cm range). It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. |
| 22 | Executive Chair----SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. The chair seat & back size are: HIGH BACK SIZE: 51.5 cm. (W) x 82.0 cm. (H), SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). ARMRESTS (Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features :· Up-Down adjustment–7 steps (7.0 ± 0.5cm range)· It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY (EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. |
| 23 | Revolving Chair----SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. FULL BACK SIZE: 51.5 cm. (W) x 69.0 cm. (H). SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon. Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. |
| 24 | Visitor Chair with arm----THRILL CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair. SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression. M.S. VISITOR TUBULAR FRAME: The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame. |
| 25 | Back Unit, size: 1200 (W) x 450 (D) x 1192.5 (H) mm.----Construction & Material:Rigid Knock down construction.Prime Quality CRCA Steel – 0.8 mm Thick.Sliding Door Arrangement:Full height Sliding Door with top hanging arrangement to prevent derailment.Each door provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise.Locking & handle :Snap on type aesthetically appealing die cast 5 Lever Cam lock for safe locking.Plastic flush & recessed handle.Shelving :Height wise Adjustable Shelf Mounting.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum & for half shelf it is 40 Kg.4 Nos. of Adjustable Half Shelf.Top option:1 mm for Metal Top.Accessory:Craddle with pipes for hanging Godrej Instadex files.Leveler:Screw type leveler with hex plastic base (add in unit height min.8 mm & additional 5 mm max for adjustment).Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). Size: 1192.5 (W) x 1200 (D) x 450 (H) mm. |
| 26 | Square Table, size: L 24\\" X W 24\\" X H 20\\"----Square Table, size: L 24\\" X W 24\\" X H 20\\" |
| 27 | Playgro Jolly Chair----Playgro Chair L 13\\" X W 13\\" X H 20\\" |
| 28 | Playgro Bliss Chair----Playgro Chair L 16.1\\" X W 14.3\\" X H 21.8\\" |
| 29 | Round Table, size: D 41.3\\" X H 20\\"----Round Table, size: D 41.3\\" X H 20\\" |
| 30 | Duck BIN----L 10\\" x w 20\\" x H 25.5\\" |
| 31 | RECEPTION TABLE, 5’ W LINEAR DESK----Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit: Made of 18mm Thick Pre laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories: Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. Size: 1500 (W) x 870 (D) x 740 (H) mm. |
| 32 | Chair With Arm----SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR SLED BASE CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube. ARMREST : The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame. SHOE : The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular frame. Felt is provided below the shoes. |
| 33 | Chair without arm----SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. |
| 34 | Steel Rack, Size: 900 (W) x 450 (D) x 1800 (H) mm.----Type: OPEN TYPE.Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted): 6 nos.Shelves Material: 0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513. Depth in mm (±5 mm): 380 mm. Width in mm (±5 mm): 915 mm. Height in mm (±5 mm): 2440 mm. Paint: Powder coated with Lead Free Paint. WARANTEE PERIOD IN NUMBER OF YEARS: 1 year. |
| 35 | Steel Storage, size: 1830 H x 914 W x 463 D----Size:Plain (4S) - 916 mm (W) x 486 mm (D) x 1981 mm (H),Construction & Material:Welded construction.0.8 mm thk CRCA for Back, Shelf & 0.9 mm thk CRCA for all other components.Configuration (Door):Full height Steel Hinged Door.Locking & handle :Mazak Handle.3 way locking mechanism with shooting bolt arrangement.Shelving :Height wise Adjustable Shelf Mounting.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Plain 4S : 4 Nos. of Adjustable Full Shelves.Leveler:M10 Screw type leveler with hex plastic base.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). |
| 36 | Executive Desk with Return Desk, size: 1800 (W) x 750 (D) x 750 (H) mm.----Unitized desk series is a minimal but comprehensive manager desk range designed for a variety of applications and layouts. The range has 5ft and 6ft wide L-shaped manger tables with pedestals. Main Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop: Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs: Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members: Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Return Cross Members: Return Cross Member in Unitized T-2 Desk Series is made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). Return Cross Member is assembled by friction fit PDC joinery and grub screws at one end and 3mm thick HR plate welded at other end. There is one return cross member for one table. Access Flap: Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box: Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position. Size: 1800 (W) x 750 (D) x 750 (H) mm. & ERU: 900 (W) x 450 (D) x 750 (H) mm. |
| 37 | Low Ht. Steel Storage Unit, size: 690 (H) X 900 (W) X 470 (D) mm.----Construction:Rigid knock down construction.Material:All major Panels – 0.7 mm Thk CRCA, False Side Panel – 0.9 mm Thk, Bottom Shelf – 0.8 mm Thk CRCA Sheet. Vertical Handle sections for shutters: 1.2mm Thk CRCA sheet.Shutters:PVC Shutters.Standard internal configuration:1 Adjustable Shelf for 690H TDU.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Shutter Opening:The Double shutters operating in opposite direction (i.e. from right to left & left to right) giving full accessibility to inside without disturbing aisle.Locking Mechanism:10 lever Cam lock through lock lever.Finish:Epoxy Polyester Powder coating to thickness of 50 micron (+/- 10). Size: 690 (H) X 900 (W) X 470 (D) mm. |
| 38 | Executive High Back Chair----SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. The chair seat & back size are: HIGH BACK SIZE: 51.5 cm. (W) x 82.0 cm. (H), SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). ARMRESTS (Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features :· Up-Down adjustment–7 steps (7.0 ± 0.5cm range)· It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY (EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. |
| 39 | Executive High Back Chair----SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. FULL BACK SIZE: 51.5 cm. (W) x 69.0 cm. (H). SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon. Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. |
| 40 | Visitor Chair with arm----THRILL CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair. SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression. M.S. VISITOR TUBULAR FRAME: The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame. |
| 41 | Single Seater Recliner----Features: Power-controlled hugger mechanism reclining into any position with touch buttons near armrest for personalized comfort. Effortless and noiseless movement from upright to fully reclined. 90° to 160° angle within seconds. Stable base due to metal reclining mechanism which is powder-coated, ensuring robust support and longevity. Soft foam in seat and backrest, upholstered with superior finishing, in a cool to touch polyester fabric. Ergonomically designed with high backrest and head support for optimal spine relaxation. Size: 710 (W) x 920 (D) x 1080 (H) mm. Seat Height: 500 mm. |
| 42 | 1 Seater sofa----Features: Asleek sofa with a streamlined silhouette and boxy flare, the sofa is built to ensure with a solid wood framework. The square - padded backrest enhances the overall aesthetics. Sofa, resilient foam provides comfort while the mid backrest offers ergonomic support. Synthetic leather upholstery is easy to maintain. Size: 720 (W) x 765 (D) x 840 (H) mm. |
| 43 | 3 Seater sofa----Features: Asleek sofa with a streamlined silhouette and boxy flare, the sofa is built to ensure with a solid wood framework. The square - padded backrest enhances the overall aesthetics. Sofa, resilient foam provides comfort while the mid backrest offers ergonomic support. Synthetic leather upholstery is easy to maintain. Size: 1640 (W) x 765 (D) x 840 (H) mm. |
| 44 | Dining Chair----The seat and back are made up of injection moulded high impact strength polypropylene polymer compound with indoor grade UV resistance.Seat size:52.5 cm. (W) x 53.2 cm. (D).Back size: 51.6 cm. (W) x 40.5 cm. (H).The powder coated welded tubular frame is made from Ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W. tube.The shoes are made of high impact strength polypropylene polymer compound with indoor grade UV resistance and pressed fitted with tubular frame. |
| 45 | Modular Workstation Recta Type, size: 1200 (W) x 600 (D) x 750 (H) mm.----Cello legs: This leg has inclination in one plane. Cello leg has an extrusion cover made of Aluminum alloy which can have different color. Wire Tray: without integrated power box & switch plate. Soft closing access flap with brush. Metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HR. Screen: 6mm thk T mold laminated glass screen on studs is providing on table top. Height 300M above table top. Worktop: 25mm thk prelaminated partical board with pvc lipping. Table Top size: 1200 (W) x 600 (D) x 750 (H) mm. |
| 46 | Queen Size Mattress, 72 x 60 x 5----Number of Layers: Two Layers. Thickness of Top Layer (Tolerance :- ± 2 mm): 125 mm. Thickness of Bottom Layer (Tolerance :- ± 2 mm): 100 mm. Material of Top Layer: PU Foam. Material of Bottom Layer: PU Foam. Top Layer Density: 18 kg/m³. Bottom Layer Density: 18 kg/m³. Quilting: Both Side Quilting (Double Sided). Thickness of Quilting (± 2 mm): 8 mm. Mattress Top: Box Top. Mattress Cover Fabric Composition: Polyester. Dimensions (Tolerance ±15 mm): 1829 mm x 914 mm. Warranty (In Years): 1 year. |
| 47 | Modular Confernce Table for 31 Str., size: 10973 (W) x 1800 (D) x 750 (H) mm.---(Providing, fitting & fixing of \\"31 Str. Conference Table\\" Work Surface: Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty Panel: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 48 | Attendent Bed---(Providing, fitting & fixing of \\"Metal Attendent Bed\\" Base frame: MS ERW Tube. Section: RECT. 20 X 40mm. Thickness: 1.6 mm. Legs: MS ERW Tube. Section: SQUARE30 x 30mm. Thickness: 1.6 mm. Lead Screw with fixed handle: MS threads with Black Oxide Coating. Thread rolled MS lead screw with EN1A Nut. MS handle with chrome finish integrated with the lead screw. Leg elevation ratchet: MS powdercoated. Section: Dia 10mm. Lying surface frame: MS ERW tube. Section: Dia. 25.4 mm. Thickness: 1.2 mm. Lying Surfaces: MS sheet. Thickness: 1 mm. Easy Cleaning for maintaining hygiene. Head Board & Leg Board: MS ERW tube. Section: Dia.25.4 mm. Thickness: 1.2 mm. Headboard with Horizontal Tubes. Castors: Plastic polymer. Thickness: Wheel Dia125mm. Single wheel diagonal locking castors. Maximum safe working load: 155 kg. Maximum Patient load: 120 kg. Backrest Angle: 65°+/-5°. Knee Rest Angle: 30°+/-5°. Mattress: MATTRESS with ridges on foam to get better adherence to lying surface. Overall Sizes: (L)1940 mm X ( W)835 mm X (H) 100 mm (±10) for Plain Matress. Foam: PU foam slab stock. Thickness: 100MM. Slab stock foam with density 40±2 kg per cu.mtr with ridges for easy bending. Upholstery: HELIUM HEAVY A/F F/R SM. Thickness: 350GSM 0.45THK. WITH FIRE RETARDENT AND ANTIMICROBIAL PROPERTIES. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 49 | Doube Glass Centre Table---(Providing, fitting & fixing of \\"Centre Table\\" Table Top Material Type: Glass. Table Top Edges: Straight. Length of Table Top (Tolerance ±50 mm): 900 mm. Depth of Table Top (Tolerance ±20 mm): 600 mm. Material Type of Table Understructure: Wooden/Engineer Wood Understructure. Support Type of Table Understructure: Leg. Material of Table Understructure: MDF Board. Thickness of Wooden Leg / Gable (Tolerance ±2 mm): 18 mm. Availability of Pedestal / Storage Unit: Yes. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 50 | Medicine Cupboard---(Providing, fitting & fixing of \\"Medicine Cupboard\\" Overall depth range (mm): 400 mm (+/- 2.5%). Overall Width range (mm): 400 mm (+/- 2.5%). Overall Height range (mm): 820 mm (+/- 2.5%). Painting: Powder Coating. Type of slide of drawer: Fitted With Telescopic Channel. Material of Enclosure of bedside locker: Mild steel. Material of cabinet and Drawer: Mild steel. Locking system for cabinet and drawer: Yes. Number of Shutters: 1. Finish: Power Coated. Frame Tube Material: MILD STEEL. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 51 | Wooden Centre Table with inbuild storage, size: 1000 (W) x 600 (D) x 450 (H) mm.---(Providing, fitting & fixing of \\"Centre Table\\" Table Top Material Type: Particle Board. Availability of Table top edge: Yes. Thickness of Table Top Edge (Tolerance ±5 mm): 25 mm. Table Top Edges: Straight. Length of Table Top (Tolerance ±50 mm): 1200 mm. Depth of Table Top (Tolerance ±20 mm): 600 mm. Material Type of Table Understructure: Wooden/Engineer Wood Understructure. Support Type of Table Understructure: Gable. Material of Table Understructure: Particle Board. Thickness of Wooden Leg / Gable (Tolerance ±2 mm): 18 mm. Availability of modesty panel: Yes. Availability of Pedestal / Storage Unit: Yes. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 52 | Compact Office Table with storage, size: 1350 (W) x 600 (D) x 750 (H) mm.---(Providing, fitting & fixing of \\"Office Table\\" Worksurface:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998with 0.4 mm PVC membrane pressed on to top.Gromet provided on work surface for wire management.Modesty Panel:Made of 25 thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Understructure:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Hinge door storage:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Handle is provided for ease of opening.Storage is provided with cam lock for security. Size: 1350 (W) x 600 (D) x 750 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 53 | Judge Table, size: 1650 (W) x 750 (D) x 750 (H) mm.---(Providing, fitting & fixing of \\"Judge Table\\" Worksurface:Made of 25 mm thick MDF - one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Softclosing access flap with in-build power box are provided on work surface for wire management.Modesty Panel:Made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top.Understure:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Integrated Pedestal:Made of 25 mm thick pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990,edge banded with matching 2 mm thick PVC lipping.Drewer fronts made of 25 mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILEtype which uses powder coated 400 mm long metal panel drawer slides.Drawer extension is 325 mm.Drawers have a soft closing & anti slam mechanism.Handles are provied for ease of opening.Pedestal is provided with lock for security. Size: 1650 (W) x 750 (D) x 750 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 54 | Squre Corner Table---(Providing, fitting & fixing of \\"Corner Table\\" Overall Size : Width : 60cm Depth : 60cm Height : 45cm. 1. Understructure: Legs, top wooden frame & bottom tie members are made out of first quality rubber wood without knots & defects on all faces. Bottom tray is made of 1.2mm thick MS sheet. Metal brackets are used for assembly purpose. 2. Top: 8mm thick toughened glass. 3. Construction: Knock-down assembly. 4. Finish: Bloom_coffee table is in two colour finish option - ÿ Option - 1 : Natural finish ÿ Option - 2 : Walnut finish Wooden members are PU painted with hardness-2H. Metal components are powder coated. Bottom MS metal tray is having floral pattern laser-cut. Top glass is having sand blasted floral pattern on bottom surface. 5. Hardware: Knock-down assembly with high quality standard hardware like screws, metal inserts, wooden dowel, plastic leg bush etc. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 55 | Tublular Cantilive CHAIR with arm---(Providing, fitting & fixing of \\"PUBLIC CHAIR\\" The seat and back are made from chemically treated and seasoned wood,upholstered with plywood, black leather-cloth, and U-foam.BACK SIZE:46.0cm (W) x 27.0cm (H).(±10) SEAT SIZE:46.0cm (W) x 40.0cm (D).(±10) The armrest tube is made of M.S. E.R.W. tube dia. 2.54cm. (1”) x 16BG thick and powder coated.The armrest is gas-assisted injection moulded from black Polypropylene.The understructure assembly is a cantilever type frame made of dia.2.54cm. (1”) x 14BG. thick M.S. E.R.W. tube and powder coated. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 56 | Corner Table with cruve, size: 600 (W) x 600 (D) x 450 (H) mm.---(Providing, fitting & fixing of \\"Corner Table\\" MATERIALS & SIZE : Material: Plywood+ MDF + Solid wood legs Color : Dark Wenge Top Material: Plywood+ MDF Frame Material: Plywood+ MDF Leg Material: Solid wood ( Rubber wood) Shoe material: Polypropylene Mode of Supply Storage: NA Top Dimension: 600X600X18 Height: 455 Thickness of frame: 18 Thickness of understructure Legs: 68 (+/- 5) Weight / unit (KG): 14 KG (+/- 4) Overall LxWxH: 1200 X 600 X 455. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 57 | Single Bed with Mattress---(Providing, fitting & fixing of \\"Single Bed with Mattress\\" Dimensions W x H x D (cm)- 100 x 95.6 x 206 (±10) Seating Height (cm)- 43 Finish Color- Black Primary Material- Metal Warranty- 1 Year Warranty Storage Included- No Storage Mechanism- No Storage Delivery Condition- Knock Down Headboard Included- Yes. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 58 | Wheel Chair---(Providing, fitting & fixing of \\"Wheel Chair\\" Description: Chrome finished wheelchair foldable type with cushion type seat and flexible back. wheel type is Mag wheels. Overall Sizes: (L) 790mm x (W) 600mm x (H) 870 mm. (±10) Frame structure: Foldable frame structure is made of Ø22x1.2mm steel tube,A3 carbon steel with chrome finish.Cross bar made of Ø25.4x1.2mm A3 carbon steel. Rear wheel: 24 inch Solid Mag wheels with alloy in the rim and solid rubber lining for the wheels for strong and sturdy performance.It is made of PA polymer and outer with solid rubber. Hand rim: Intgrated handrim provide to drive the wheel chair.It is made of Ø16x1.2mm A3 carbon steel with chrome finish. Front wheel: 8 inch HUB made of PA polymer and outer with Solid rubber. Arm rest: PU molded arm rests for better arm support.Holder base made of ABS polymer. Calf rest: Leatherite strap for calf rest. Seat: Cushion leatherite seat. Foot rest: Adjustable alluminum(ZL104)die cast foot rest with up down and swiwel type adjustment. Push handle: Handles provided with Moulded PVC grip to push the wheelchair. Brakes: Hand brakes provided to lock the wheelchair at desired location. Foot Press: Provision of extended base with Moulded Plastic (PE PLASTIC) grip to lift the wheelchair front to overcome obstructions while maneuvering. Finish: Anti rust chrome finish. Maximum Patient load: 100 kg. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 59 | Premium Suite with Return Unit, size: MD 3000 (w) x 1050 (D) x 740 (H) mm. ERU 1500 (W) x 600 (D) x 610 (H) mm.---(Providing, fitting & fixing of \\"Premium Suite with Return Unit,\\" MAIN WORKTOP : Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. LEATHER PAD: Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top panel. DRAWER UNIT: Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawer unit is provided with soft closing channels for smooth opening and closing. Drawer unit is secured with side central lock. OPEN STORAGE UNIT: Top panel and open storage unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. MODESTY: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims. UNDERSTRUCTURE: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening. Also lock is provided on side panel for security. ACCESS FLAP WITH POWER BOX: Soft closing access flap with power box contains 3 Universal Sockets, 2 USB power points, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6 connections. HIDDEN WIRELESS MOBILE CHARGER: It will only be available in 3000mm main table. It is fitted below leather pad. ERU: TOP PANEL: Made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. SLIDING SHUTTER: Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All thickness edges are edge banded with matching lipping. Door is provided with soft closing & anti slam mechanism. Handle is also provided for ease of opening. Storage is secured with lock. UNDERSTRUCTURE: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. DRAWERS: Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm thick particle board with leatherette on top surface. Drawers have soft closing channels for smooth opening and closing. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 60 | Multi Cabinet unt for Back side, size: 2400 (W) x 470 (D) x 1950 (H) mm.---(Providing, fitting & fixing of \\"Back Unit\\" CONSTRUCTION AND MATERIAL: Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA for 600W and 0.8mm CRCA for 1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). 4 nos of shelves for 1950H and 5 nos of shelves for 2325H back unit. Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). VENEER DOOR: Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door is provided with soft closing hinge. Handle is also provided for ease of opening. Storage is secured with 3 way cam lock. GLASS DOOR: Made from the combination of aluminium alloy (63400) extrusion and 4mm clear toughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy Polyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease of opening. RH Glass Door is provided with 3 way cam lock for security. Size: 2400 (W) X 1950 (H) mm.(±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 61 | Thick layed 1 Seater Sofa---(Providing, fitting & fixing of \\"1 Seater Sofa\\" Net Weight (kg)- 44 Dimensions W x H x D (cm)- 110 x 89 x 93.5 Finish Color- Textured Bond White Indigo Seat Height (cm)- 47.5 Primary Material- Pinewood Delivery Condition- Knock Down Upholstery Material- Fabric Warranty- 1 Year Warranty. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 62 | multi layed 3 Seater Sofa---(Providing, fitting & fixing of \\"3 Seater Sofa\\" Dimensions W x H x D (cm)- 210 x 89 x 93.5 Finish Color- Textured Bond White Indigo Net Weight (kg)- 62 Seat Height (cm)- 47.5 Style- Contemporary & Modern Primary Material- Pinewood Delivery Condition- Knock Down Upholstery Material- Fabric Warranty- 1 Year Warranty. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 63 | Leather High Back Chair---(Providing, fitting & fixing of \\"Main High Back Chair\\" The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with pure leather and moulded high resilience (HR) polyurethane foam of density 45± 2 kg/m³,and hardness load 16±2 kgf as per IS:7888 for 25% compression.Seat Size: 47.6 cm.(W) x 49.2 cm. (D).(±10) The cushioned back is made of PU foam with insitu molded MS E.R.W. round tube of size 1.9±0.03 cm x 0.16 ±0.0128 cm.It upholstered with pure leather.High Back size : 47.5 cm. (W) x 77 cm. (D).(±10) The armrest top is moulded from polyurethane (PU) upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of Ø 3.81 ± 0.03 cm x 0.2 ± 0.01 cm thk M.S.E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5 ± 0.5 cm in 5 steps.The adjustable tilting mechanism is designed with the following features:360° revolvng type.Front-pivot for till with feet resting on ground and continuous lumbar support ensuring more comfort.Tilt tension adjustment can be operated in seating position.5-position Tilt limiter giving option of variable tilt angle to the chair.Seat/back tilting ratio of 1:2.The mechanism housing is made up of HPDC Aluminium black powder coated.Seat depth adjustment is integrated in the seat through a sliding mechanism.Seat depth adjustment range is of 6.0±0.5 cm.Back frame is connected to the UP/DN mechanism housed in plastic T spine.It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors.The pedestal is 65.0 ± 0.5 cm.pitch-center dia.5 nos. twin wheel castors are injection moulded in plastic having 6.0 ± 0.1 cm wheel diameter and assembled to pedestal. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 64 | Judge Chair---(Providing, fitting & fixing of \\"Judge Chair\\" The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with leatherette and moulded high resilience (HR) polyurethane foam of density 45±2 kg/m³,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.Seat Size: 47.0 cm. (W) x 48.0 cm. (D).(±10) The cushioned back is made of PU foam with insitu molded MS E.R.W round tube of size 1.9±0.03 cm x 0.16 ± 0.0128 cm.It upholstered with leatherette.High Bck Size: 47.7 cm (W) x 76.4 cm (D).(±10) The armrest top is moulded from polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest support made of Ø 3.81 ± 0.03 cm x 0.2 ± 0.01 cm thk M.S. E.R.W. tube having chrome plated finish.The armrest height adjustable up to 6.5 ± 0.5 cm in 5 steps.The adjustable tilting mechanism is designed with the following features:360° revolving type.Front-pivot for tilt with feet resting on ground and cntinuous lumber support ensuring more comfort.Tilt tension adjustment can be operated in seating position.5-position tilt limiter giving option of variable tilt angle to the chair.Seat/back tilting ratio of 1:2.The mechanism housing is made up of HPDC aluminium black powder coated.Seat depth adjustment is integrated in the seat through a sliding mechanism.Seat depth adjustment range is of 6.0±0.5 cm.Back frame is connected to the UP/DN mechanism housed in plastic T spine.It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.The pedestal is high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors.The pedestal is 65.0 ± 0.5 cm.pitch-center dia.5 nos. twin wheel castors are injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.) |
| 65 | Mid Back cantileaver Chair---(Providing, fitting & fixing of \\"Visitor Chair\\" The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with leatherette and moulded high resilience (HR) polyurethane foam of density 45±2 kg/m³,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.Seat Size: 47.0 cm. (W) x 48.0 cm. (D).(±10) The cushioned back is made of PU foam with insitu molded MS E.R.W round tube of size 1.9±0.03 cm x 0.16 ± 0.0128 cm.It upholstered with leatherette.Mid Bck Size: 47.7 cm (W) x 60.1 cm (D).(±10) The tubular frame is cantilever type & made of Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm thk S.S 202 tube.The back connected to frame through chrome plated high pressure die cast connector piece. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 66 | Round edge squre Table, size: 900 (W) x 900 (D) x 740 (H) mm.---(Providing, fitting & fixing of \\"Small Meeting Table\\" Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Work top is available in two shapes Square and Pebble (Round). Side Panel: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio Visual equipment is to be fixed later. Understructure: The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Anchor Roma 6 Module is provided for electrical fittings.An additional cutout with a plate is provided for mounting Audio Visual Cables( eg HDMI,VGA-A,etc.) Removable panel: The 3D removable panels are provided for ease of servicibility. It also provides easy access to internal space in case of any Audio Visual equipment is to be added later. It is made of 1.2mm CRCA MS IS:513 and EPOXY POLYESTER Powder Coated (DFT 40-60 microns). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 67 | Single Conference Table---(Providing, fitting & fixing of \\"Conference Table\\" Work top: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management: A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). Size: 3600 (W) x 1500 (D) x 740 (H) mm. (±10) The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 68 | Premium Leather High Back Chair---(Providing, fitting & fixing of \\"Executive High Back Chair\\" SEAT ASSEMBLY: The Cushioned seat inner is made of injection moulded glass filled poly-amide. Upholstered seat sub-assembly consists of moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. Seat SIZE: 45.5cm. (D) x 52.4cm. (W). (±10) BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene Injection molded Plastic Inner. BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D). (±10) ARMRESTS: The armrest having four range of adjustment - Height adjustment sub assembly is inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. Up-Down adjustment has 8 position (10.5±0.5cm range). Arm top swivel adjustment- 2 position, 12°±2° swivel inside. Arm top width adjustment - Any position (2.0±0.5cm range each arm top). Arm top To - Fro Adjustment- any position (4.0±0.5cm range). Armrest top is made up of high density PU molded over glass filled Poly-amide inner. POSTURE PERFECT MECHANISM: The adjustable tilting mechanism is designed with the following features: 360° revolving type. Forward tilt of sesat and back. Upright tilt lock. Tilt tension adjustment can be operated in seating position. 3-position Tilt limiter. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment range is of 5.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be adjusted in the range of 7.5±0.5 cm. PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. TWIN WHEEL CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel Diameter and assembled to pedestal.) |
| 69 | Ovel shape two layer side table---(Providing, fitting & fixing of \\"Visitor circular side table\\" Table Top Material Type: Particle Board. Availability of Table top edge: Yes. Thickness of Table Top Edge (Tolerance ±5 mm): 25 mm. Table Top Edges: Round. Length of Table Top (Tolerance ±50 mm): 600 mm. Material Type of Table Understructure: Metal Understructure. Support Type of Table Understructure: Leg. Material of Table Understructure: Mild Steel. Table Understructure Metal Legs Cross Section (Approx): 40 x 40 mm. Thickness of Metal Legs Cross Section: 1.0 mm. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 70 | non revolving movable Chair With Arm---(Providing, fitting & fixing of \\"Chair With Arm\\" SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). (±10) BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. ARMREST : The Armrest are made of glass filled Polypropylene compound and assembled over the tubular frame. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Poly Amide. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 71 | Desklet Chair---(Providing, fitting & fixing of \\"Desklet Chair\\" SEAT / BACK ASSEMBLY : The Seat is injection moulded in glass filled Polypropylene compound which is upholstered with fabric upholstery covers and moulded Polyurethane foam. The Back is injection moulded in glass filled Polypropylene compound which is upholstered with Mesh fabric (Refer colour chart for seat & Back upholestry in product catalog). SEAT SIZE : 50.0cm. (W) x 48.0 cm. (D). (±10) BACK SIZE : 53.0 cm. (W) x 39.0cm. (H). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression. M.S. POWDER COATED FRAMES FOR 4 LEG CHAIRS :The powder coated ( DFT 50±10 microns) welded tubular main frame is made from Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm and Ø1.6±0.3mm x 0.16 ± 0.0128cm M.S. E.R.W tube. The Ø1.9 ±0.3mm x 0.12 ±0.0096 cm M.S.E.R.W. tube used as connecting member between LH & RH frames. Desklet support frame is made from Ø 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and welded to main frame. SHOE : The shoes are made of glass filled Polypropylene compound with and pressed fitted with tubular frame. Felt is provided below the shoes. QUARTER DESKLET: The 'L' shape desklet is made of 1.8 ±0.05cm. thk. pre-laminated particleboard with 0.2 ± 0.05cm. thk. injection moulded PolyPropylene all around. Desklet has Front and back adjustment of 8.0 cm ± 0.5 cm. OUTER DIMENSION: 31.5±0.1cm. (W) X 47.0±0.1cm. (D). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 72 | Fome sofa 1 str.---(Providing, fitting & fixing of \\"1 Seater sofa\\" Total Number of Seats in the Sofa Set: 1. Frame Covering: Fully Upholstered. Backrest Cushion Material: Foam. Density of Cushion of Backrest Material (Kg/Cubic M): 20. Covering Material for Seat and Backrest: Leatherite. Frame Structure Material and size (±1 mm): 18 mm thick Teak Plywood. Seat Cushion Material: Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M): 35. Type of Spring in the Base / Seating: Web suspension. Length of Single Seater Units in mm (±5 mm): 855. Depth of Sofa Units in mm (±10 mm): 800. Sofa Height (Without Back Cushion) ±5 (mm): 550 millimeter. Sofa Height (With Back Cushion) ±5 mm: 970 millimeter. Seat Cushion Length ±5 (mm): 545. Seat Cushion Width ±5 (mm): 530. Seat Cushion Thickness ±3 (mm): 150. Backrest Cushion Length ±5 (mm): 530. Backrest Cushion Width ±5 (mm): 425. Warranty: 1 - Year. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 73 | Foam Sofa 3 Str.---(Providing, fitting & fixing of \\"3 Seater sofa\\" Total Number of Seats in the Sofa Set: 3. Frame Covering: Fully Upholstered. Backrest Cushion Material: Foam. Density of Cushion of Backrest Material (Kg/Cubic M): 20. Covering Material for Seat and Backrest: Leatherite. Frame Structure Material and size (±1 mm): 18 mm thick Teak Plywood. Seat Cushion Material: Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M): 35. Type of Spring in the Base / Seating: Web suspension. Length of Three Seater Units in mm (±10 mm): 1710. Depth of Sofa Units in mm (±10 mm): 800. Sofa Height (Without Back Cushion) ±5 (mm): 550 millimeter. Sofa Height (With Back Cushion) ±5 mm: 970 millimeter. Seat Cushion Length ±5 (mm): 1495. Seat Cushion Width ±5 (mm): 530. Seat Cushion Thickness ±3 (mm): 150. Backrest Cushion Length ±5 (mm): 1630. Backrest Cushion Width ±5 (mm): 425. Warranty: 1 - Year. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 74 | SS Table top with SS Understorage with accessories---(Providing, fitting & fixing of \\"SS Table top with SS Understorage with accessories\\" Cabinet Material: Combination of 0.5mm (Body panels) and 1.2mm thick (Horizontal stiffener & leg channels) Galvanized sheet as per IS277. Unit Construction: Floor, Tall and Wall units will be made using sheet metal panels connected with fasteners. Metal Shutters: Powder coated Steel shutters made up with inner and outer panels using 0.6mm thick Galvanized steel corner formed. Precoated Steel shutter made with outer precoated panel made of 0.75 Galvanized sheet and powder coated inner panel 0.6mm thick Galvanized steel corner formed. 4mm frosted glass in metal corner formed shutter. Wooden shutters: 18mm thk shutters in following finishes. Marine ply with laminate. Marin ply with laminate with aluminum profile handle. Marine ply with laminate with Rim handles/ Chisel handles/ Mystic handles. Marine ply + PU painted. Marine ply + PU painted with aluminum profile handle. Marine ply + PU painted with Rim handles/ Chisel handles/ Mystic handles. Lac MDF shutter board from 5K make. Lac MDF shutter with aluminum profile handle board from 5K make. Lac MDF shutter with Rim handles/ Chisel handles / Mystic handles. Acrylic on birch ply shutter. Acrylic on birch ply shutter with aluminium profile handle. Acrylic on birch ply shutter with Rim handles/ Chisel handles/ Mystic handles. Prelam BWR shutter. Prelam BWR shutter with aluminium profile handle. MDF+ back painted glass shutter with aluminum profile handle. Prelam BWR with Rim handles/ Chisel handles / Mystic handles. Wide aluminum shutter with back painted glass. Finish on metal surface: Epoxy polyester powder coating with dry film thickness of 50 microns (±10). Wire baskets: Stalwart basket Made of 304 grade Stainless steel wires with Ni Cr plating and Hettich double extension slides. Hettich kits for wire basket and Quadro slides. Serene Undermount soft closing slides with 304 grade Stainless steel wires with Ni Cr plating. Drawer system: Tranquil drawer M-type and F-type. Shelves: 0.5thk Galvanized steel shelves in case of metal hinged door unit. Hinges: Hettich hinges with CED coating for extended corrosion resistance. Hettich sensys soft closing hinges. Legs: Hettich make PVC height adjustable legs. (100mm/ 150mm). Skirting: Rehau make PVC Co-extruded skirting in metallic silver and black color. (100mm / 150mm). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 75 | Additional Workstation Chair---(Providing, fitting & fixing of \\"Workstation Chair\\" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. HIGH BACK SIZE: 51.5 cm. (W) x 82.0 cm. (H). (±10) SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : Up-Down adjustment–7 steps (7.0 ± 0.5cm range). It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon.) |
| 76 | Cushioned Leatherette Chair---(Providing, fitting & fixing of \\"Revolving Chair\\" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. FULL BACK SIZE: 51.5 cm. (W) x 69.0 cm. (H). (±10) SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features : Up-Down adjustment–7 steps (7.0 ± 0.5cm range). It has to & fro movement along with Swivel adjustment. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 77 | Fabric Full Back Chair---(Providing, fitting & fixing of \\"Revolving Chair\\" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. FULL BACK SIZE: 51.5 cm. (W) x 69.0 cm. (H). (±10) SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ± 1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 78 | Multipurpose Leatherette High Back chair---(Providing, fitting & fixing of \\"Revolving chair\\" SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.The Recron filling done in seat & back ( Executive chairs only) for extra fluffiness and comfort in chair. HIGH BACK SIZE: 51.5 cm. (W) x 82.0 cm. (H). (±10) SEAT SIZE: 53.5 cm. (W) x 51.0 cm. (D). (±10) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS: The adjustable armrest is designed with the following features: Up-Down adjustment– 6 steps (7.2 ± 0.5cm range), Armrest top is mounted on Armrest structure made of glass filled Nylon, Armrest Top is PU moulded over glass filled Nylon insert. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK: The mechanism is designed with the following features: 360° revolving type. 3 position locking with anti shock mechanism. Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 9.5 ± 0.3 cm. PEDESTAL ASSEMBLY: The pedestal is injection moulded in black glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.1 ±0.5cm. pitch-center dia. (76.1 ± 1.0cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 79 | Penta Type Workstation , size: 1500 (W1) x 1500 (W2) x 600 (D) x 750 (H) mm.---(Providing, fitting & fixing of \\"Modular Workstation Penta Type\\" Type of system: Panel based system. Type / Shape of cluster: Single Seater L Shape Cluster. Wire Management for electric switch: Above the table Top. INSTALLATION COMMISSIONING: The price includes the cost of installation and commissioning of the entire unit at consignee site (excluding the cost of Civil Work which would be got done by the Consignee at his own cost as per design and layout plan provided by the seller). Frame material for work station: Powder Coated Extruded Aluminium Sections. Work top support material: Gable end made of prelaminated particle board. Material of table top: Prelaminated particle board Grade II type II conforming to IS 12823/Latest. Table top finish material: Paper based laminate. Material of tiles for top: Fabric tackable. Material of intermediate tiles: laminated block - 38mm thick paper honeycomb plus 3mm mdf on each side plus decorative laminate. Material of bottom tiles: Metal tile powder coated. Material of leg: M.S. Type of leg: Loop leg. Length of table top (main frame) ±10 mm: 1500 mm. Length of table top (Return Frame)± 10mm: 1500 mm.(±10) Depth of table top ± 10mm: 600 mm. (±10)Thickness of table top ±2mm: 25 mm. Overall height of work station partition ±10mm: 1200 mm. (±10) Thickness of side partition/panel ±2mm: 20 mm. Thickness of main frame ±2 mm: 50 mm. leg size/Section: 40 mm x 40 mm. Total number of Pedestal unit provided: 1 no. Total Number of drawers /storage in Pedestal units: Three drawers. Warranty period: 1 Year. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 80 | Large Conference Table, size: Desk 1 14348 (W) x 2350 (D) x 750 (D) mm. Desk 2 14348 (W) x 2350 (D) x 750 (H) mm. Desk 3 13496 (W) x 600 (D) x 750 (H) mm. Desk 4 13496 (W) x 600 (D) x 750 (H) mm.---(Providing, fitting & fixing of \\"165 Seater Conference Table Part 1\\" Work Surface: Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty Panel: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 81 | Corner Module for Conference Table, size: Desk 1 14348 (W) x 2350 (D) x 750 (D) mm. Desk 2 14348 (W) x 2350 (D) x 750 (H) mm. Desk 3 13496 (W) x 600 (D) x 750 (H) mm. Desk 4 13496 (W) x 600 (D) x 750 (H) mm.---(Providing, fitting & fixing of \\"165 Seater Conference Table - Part 2\\" Work Surface: Made of 36mm thick MDFone side prelaminate board conforming to IS14587: 1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above. Understructure: The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty Panel: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns). Wire Management: An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pullout audio,video cables onto worktop and connect devices charger to power socket below worktop. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 82 | L Shape Sofa---(Providing, fitting & fixing of \\"L Shape Sofa\\" Total Number of Seats in the Sofa Set: 5. Frame Covering: Fully Upholstered. Backrest Cushion Material: Foam. Density of Cushion of Backrest Material (Kg/Cubic M): 35. Covering Material for Seat and Backrest: Fabric. Frame Structure Material and size (±1 mm): 18 mm thick Teak Plywood. Seat Cushion Material: Foam. Density of Cushion of Seat Material ±3 (Kg/Cubic M): 26. Type of Spring in the Base / Seating: Zig Zag spring. Length of Two Seater Units in mm (±10 mm): 1750. Length of Three Seater Units in mm (±10 mm): 2250. Depth of Sofa Units in mm (±10 mm): 800. Sofa Height (Without Back Cushion) ±5 (mm): 430 millimeter. Sofa Height (With Back Cushion) ±5 mm: 775 millimeter. Seat Cushion Length ±5 (mm): 640. Seat Cushion Width ±5 (mm): 510. Seat Cushion Thickness ±3 (mm): 75. Backrest Cushion Length ±5 (mm): 1050. Backrest Cushion Width ±5 (mm): 508. Warranty: 1 - Year. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 83 | With arms public Chair for 3 People---(Providing, fitting & fixing of \\"3 Seater Steel Lounge Chair\\" The seat shell is a welded assembly of seat,back and side frame.The seat and back are made of 0.12 ± 0.013 cm thk CR steel sheet with oblong perforations.They are welded to sideframe of size 3.2 ± 0.05 cm x 0.5 ± 0.05 cm thk HR steel.The welded assembly is powder coated.The seat has a front water fall edge to provide popliteal clearance for comfortable seating.It also has a buttock support curve that not only provides rear support but also prevents small children from falling through the gap between seat and back.Clean and flat surfaces of seat and back aids in easy maintenance.Sear size:47.8 cm (W) x 44.6 cm (D).Back size:41.6 cm (W) x 23.0 cm (H).Understructure assembly consists of connecting beam and leg assembly made of M.S. E.R.W. oblong tube of size 7.5 ± 0.03 cm x 0.2 ± 0.016 cm thk.The welded structure assembly is powder coated.The leg assembly is fitted with shoes and levellers in nylon.The leg structure is designed with minimal area of contact close to ground providing easy access for cleaning purposes.The shoes fitted to leg assembly help in aligning the structure for back to back arrangements.Levellers take care of uneven flooring.Connecting beam is fitted with snap locking end cap.It also aids in side-by-side understructure alignment.Armrest assembly consists of armrest frame and armrest pad.The armrest frame is made up of size 3.175 ± 0.05 cm x 0.47 ± 0.027 cm thk HR steel and it is powder coated.Armrest pad is injection molded in nylon and is fitted onto the armrest frame. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 84 | Compactor 20 bodies System, Size: 2400 (W) x 4800 (D) x 1980 (H) mm.---(Providing, fitting & fixing of \\"20 bodies Movable Storage System\\" Optimizer Plus Storage System is an efficient space saving arrangement catering to a variety of office storage requirements. Each of above configurations can have following type of blocks : i) Static Drive (SD), ii) Last Drive (LD), iii) Twin Drive (TD). Rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block consists. Each unit has 5 loading levels formed by 6 loading levels with 5 nos. adjustable shelves for 2361 mm. Height body.Body units are mounted on an understructure which is fixed or moving. Front Cover: It is the foremost panel of the body on which the handles Drive unit (Drive Type) are fixed. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Cover: It is the backmost panel of the body and is the mirror image of the front cover. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Panel: The back panels are made of 0.6 thk. CRCA Steel conforming to IS: 513 Gr.D. There are two back panels – Top back panel and Bottom back panel. The two back panels are fixed together using machine screws. The purpose of the back panel is to act as a divider between 2 opposite shelves in twin body. Shared Panel: The shared panel acts as a partition between two adjacent bodies. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Tie rod assembly: The tie rod assembly acts as a substitute to the back panels (only in twin body). Optimizer Height for ground for 2361H body is 2502.5mm (2361 body + 80 understructure + 61.5 channel system). Finish: The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Storage capacity per shelf: The shelf is 1180mm in length and can hold up to 13 nos. of box files of size 85mm x 345mm x 285mm (Approx 100 kg/UDL. Understructure: The Understructure is a welded frame suitably fabricated to bear the loads based on configuration. All the components are made of HR sheet 3 mm thk. conforming to IS:2062. The understructure, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns. The handwheel is connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body. The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Centralized Locking: Each Drive type unit has a Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. A centralized locking arrangement is also provided on drive unit cover. A cam lock and lever arrangement is fitted on the drive unit cover of the last movable body, i.e. (LD). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 85 | 32 bodies Compactor, Size: 2400 (W) x 7200 (D) x 1980 (H) mm.---(Providing, fitting & fixing of \\"32 bodies Movable Storage System\\" Optimizer Plus Storage System is an efficient space saving arrangement catering to a variety of office storage requirements. Each of above configurations can have following type of blocks : i) Static Drive (SD), ii) Last Drive (LD), iii) Twin Drive (TD). Rigid Knock Down construction made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Each body block consists. Each unit has 5 loading levels formed by 6 loading levels with 5 nos. adjustable shelves for 2361 mm. Height body.Body units are mounted on an understructure which is fixed or moving. Front Cover: It is the foremost panel of the body on which the handles Drive unit (Drive Type) are fixed. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Cover: It is the backmost panel of the body and is the mirror image of the front cover. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Back Panel: The back panels are made of 0.6 thk. CRCA Steel conforming to IS: 513 Gr.D. There are two back panels – Top back panel and Bottom back panel. The two back panels are fixed together using machine screws. The purpose of the back panel is to act as a divider between 2 opposite shelves in twin body. Shared Panel: The shared panel acts as a partition between two adjacent bodies. It is made of 0.8 thk. CRCA Steel conforming to IS: 513 Gr.D. Tie rod assembly: The tie rod assembly acts as a substitute to the back panels (only in twin body). Optimizer Height for ground for 2361H body is 2502.5mm (2361 body + 80 understructure + 61.5 channel system). Finish: The bodies including shelves are given antirust surface treatment & are coated with epoxy polyester powder. The testing of paint is done for various physical & chemical properties as per IS: 101. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Storage capacity per shelf: The shelf is 1180mm in length and can hold up to 13 nos. of box files of size 85mm x 345mm x 285mm (Approx 100 kg/UDL. Understructure: The Understructure is a welded frame suitably fabricated to bear the loads based on configuration. All the components are made of HR sheet 3 mm thk. conforming to IS:2062. The understructure, after pre-treatment, is coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 40 microns. The handwheel is connected to the rollers through a ‘Sprocket-Chain’ arrangement mounted on the side of the body. The roller assembly comprises of a die-cast step wheel, 2 deep-groove ball bearings and a MS shaft. The step wheel is made of cast steel and is fitted onto the MS shaft using a feather key. The two ball bearings are then fastened on either side of the step wheel using circlips. This entire roller assembly is then snap-fitted into a wheel housing. The ‘sprocket-chain’ arrangement is covered by a 1 mm thk. CRCA sheet Drive Unit Cover with dimensions 1202mm x 398mm x 87mm and is fixed onto the side of the body. Centralized Locking: Each Drive type unit has a Locking Knob near the Drive wheel for manual locking of individual units when a person is using those units. A centralized locking arrangement is also provided on drive unit cover. A cam lock and lever arrangement is fitted on the drive unit cover of the last movable body, i.e. (LD). The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 86 | Angular leg type big size ovel Centre Table, size: 1000 (W) x 600 (D) x 450 (H) mm.---(Providing, fitting & fixing of \\"Centre Table\\" Table Top Material Type: Particle Board. Availability of Table top edge: Yes. Thickness of Table Top Edge (Tolerance ±5 mm): 25 mm. Length of Table Top (Tolerance ±50 mm): 1500 mm. Depth of Table Top (Tolerance ±20 mm): 800 mm. Material Type of Table Understructure: Wooden/Engineer Wood Understructure. Support Type of Table Understructure: Leg. Material of Table Understructure: Particle Board. Thickness of Wooden Leg / Gable (Tolerance ±2 mm): 18 mm. The bidder should either be an OEM or authorized dealer of the OEM. The authorized dealer of OEM should have dealership for the last 5 financial years.PF & ESI registration is mandatory for both OEM & Reseller. Manufacturer should have BIFMA Member Certificate (ANSI/BIFMA - LEVEL® 2), India Design Mark Certificate, Green Guard (certificate from UL) , Green Pro , GRIHA, Indoor Advantage certification along with products certifications like; AIOTA, Furniture Sustainability Standard issued by BIFMA - ANSI/BIFMA - LEVEL® 2 . Other certificates ISO 9001:2015, ISO 14001:2015, ISO 50001:2018, ISO 45001:2018 (TUV) is mandatory. Any other Green guard certificate other than UL shall be rejected. Manufacturer should have Green Guard (certificate from UL), BIFMA , Green Pro, GRIHA,IAQ Certification for few of its products. All the ISO certificates should be obtained from (TUV) NABCB (central Govt) accredited organization otherwise certificates will not be accepted. Sample and factory visit is mandatory to inspect as per the requisite. Supplier should have local service centre.) |
| 87 | Colorful Play Mat 12 mm Thk. L 600 X W 600 X 12 mm.---(Providing, fitting & fixing of Colorful Play Mat 12 mm Thk. L 600 X W 600 X 12 mm.(±10)) |
| 88 | ENGLISH ALPHABET TRAYUPPERCASE (ABC), size: 298 x 222---(Providing, fitting & fixing of ENGLISH ALPHABET TRAYUPPERCASE (ABC), size: 298 x 222 (±10)) |
| 89 | Super Prime Slide Como---(Providing, fitting & fixing of Super Prime Slide Como (±10)) |
| 90 | Basketball M.A.S.S. size: L 41.5\\" X W 17\\" X H 43\\" - 62\\"---(Providing, fitting & fixing of Basketball M.A.S.S. size: L 41.5\\" X W 17\\" X H 43\\" - 62\\" (±10)) |
| 91 | Swing, size: L 63.5\\" X W 46.5\\" X H 55\\"---(Providing, fitting & fixing of Swing, size: L 63.5\\" X W 46.5\\" X H 55\\" (±10)) |
| 92 | Square Table, size: L 24\\" X W 24\\" X H 20\\"---(Providing, fitting & fixing of Square Table, size: L 24\\" X W 24\\" X H 20\\" (±10)) |
| 93 | Round Table, size: D 41.3\\" X H 20\\"---(Providing, fitting & fixing of Round Table, size: D 41.3\\" X H 20\\" (±10)) |
| 94 | Playgro Jolly Chair---(Providing, fitting & fixing of Playgro Chair L 13\\" X W 13\\" X H 20\\" (±10)) |
| 95 | Playgro Bliss Chair---(Providing, fitting & fixing of Playgro Chair L 16.1\\" X W 14.3\\" X H 21.8\\" (±10)) |
| 96 | Giraffe Rock-N-Scoot---(Providing, fitting & fixing of Rock-N-Scoot L 30\\" x W 14\\" x H 29.5\\" (±10)) |
| 97 | Baby Cot---(Providing, fitting & fixing of \\"Baby Cot\\" Baby's Safety: Crafted from a non-toxic, environment-friendly New Zealand pine wood. Rocking Base: Turn the wheels in the upward direction to convert the crib into a rocking cot.Space-Saving Solution - A great alternative for smaller spaces, creating a healthier environment for your baby to sleep, play, and grow. Storage space: Large storage space under the cot lets you store all essential baby items. Mosquito Net: Mosquito net helps to keep your baby safe from mosquitoes and insects. Smooth Rolling Wheels: Allows you to move the crib around freely and to move aside to clean those hard-to-reach areas under the crib. Wheels can be locked to keep the crib stationary. Age Group -0 to 3 Years. Box Dimension - L 108 x B 70.5 x H 18.5 cm. Dimension - L 104 x B 60 x H 112.5 cm. (±10) Net Weight - 13.312 kg. Gross Weight - 16.475 kg) |
| 98 | Duck BIN---(Providing, fitting & fixing of \\"Duck BIN\\" L 10\\" x w 20\\" x H 25.5\\" (±10)) |
| 99 | 8G)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Old Agartala RD Block area |
| 100 | 8H)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Belbari RD Block area |
| 101 | 8I)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----MohanpurRD Block area |
| 102 | 8J)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Bamutia RD Block area |
| 103 | 8K)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Dukli RD Block area |
| 104 | 8L)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Hezamara RD Block area |
| 105 | 8M)Hiring charge of Tripper /truck etc for lifting of available excavated earth to filled up the depression/ embankment as per instruction of Eng- In – Charge (including loading /unloading, fuel, Driver & other charges) working of 8 hours will be considered as per day----Lefunga RD Block area |
| 106 | Sand Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
