|
| 1 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:a)30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :1. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 3 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:a)Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 4 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 5 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378) a) 100 mm |
| 6 | 9.62 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378)9.62.1 300x16 mm |
| 7 | Cleaning and sweeping of all flats i/c collection and carriage of refuse, rubbish, malba, silt etc to the nearest approved dustbin/collection points and cleaning as per the direction of Engineer-in-Charge. |
| 8 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 9 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below |
| 10 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking outjoints and preparing plastering the wall surface with white cement basedpolymer modified self curing mortar, including disposal of rubbish, allcomplete as per the direction of Engineer-In-Charge. |
| 11 | Distempering with 1st quality acrylic distemper (ready mixed) having VOCcontent less than 50 gram/litre, of approved manufacturer and of requiredshade and colour all complete to achieve even shade and colour :13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 12 | GST Correction factor 0.973= 2463326.17 |
| 13 | Add cost index @3% Please Enable Macros to View BoQ information |
