|
| 1 | Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc. |
| 2 | M & L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement on internal surfaces of wall. |
| 3 | M & L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth w/o using extra cement, mixed with liquid water proofing admixture including scaffolding arrangement complete (as per manufactures instructions) all as specified. Note : Liquid water proofing admixture shall be measured and paid separately. |
| 4 | M & L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces over setting coat 5mm thick in CM 1:2 as in chajja/ceiling surfaces and finished even and smooth with out using extra cement including scaffolding arrangement complete all as specified and as directed. |
| 5 | Supply only integral liquid waterproofing admixture. |
| 6 | M & L for Preparing of new plastered surfaces of ceiling and applying three coat white wash all as specified and directed. |
| 7 | M & L for Preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of primer with 3mm thick wall putty on internal surfaces of walls. |
| 8 | M & L for Preparation of new plastered surfaces and applying two coats of exterior weather proof paint over a coat primer white or tinted upto triple storey building including scaffolding arrangement on external surfaces of wall complete all as specified and directed by Engineer-in-Charge. |
| 9 | M & L for Preparation of new plastered surfaces and applying two coat of cement base paint over a coat of alkali resistant priming paint upto triple storey building including scaffolding arrangement on external surfaces of walls. |
| 10 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 11 | S & F Anodised aluminium snap grid frame work for false ceiling all as specified, Size of grid 605 x 605mm |
| 12 | M &L Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions |
| 13 | Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc. 1.5 Sqm including making good disturbed surfaces. |
| 14 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces. |
| 15 | Taking down shutters of any description n exc 1 sq. m each and removing to store. |
| 16 | Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to store. |
| 17 | M & L Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required for exc half brick but n.exc one brick thick walls. |
| 18 | S & F for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed. |
| 19 | S & F Second class hardwood rail and style 35 mm thick, Factory Made shutters Plain framed (two panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12mm veneered particle board with commercial veneering rail and stile as per IS : 1003 (Part I), kiln seasoned andsupplied and fitted to chowkats. |
| 20 | S & F Second class hardwood 35 mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats. |
| 21 | S & F Second class hardwood 30mm thick glazed and skeleton window/vent shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) and supplied and fitted to chowkats all as specified. |
| 22 | S & F Solid PVC door Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling &fixing in opening as per spcification &drawing Note:- i)Existing wall edges will have to be finished properly in cement plaster 1:4 . including fixing of 6 Nos wooden plugs for catch door frame size not exc 17Sqcm average sectional areas and 100mm long. ( i)Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (ii)PCC strip of section 5*5mm will have to be created at bottom incl. smooth finish in each door opening. |
| 23 | S & F Factory Made Solid PVC Moulded Door Shutter with particle core board , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing |
| 24 | S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as directed by Engineer-in-Charge. |
| 25 | S & F Anodised Aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings such as roller, channel, locks/handle complete all as specified. |
| 26 | Providing and fixing factory made uPVC area exceeding 1.0 sqm but n exc 2.0 each white colour casement (Openable) window made of extruded (three/two track sliding window any type) profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm),sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 27 | S & F 100mm size of mild steel butt hinges, medium weight, cold rolled . |
| 28 | S & F 75mm size of mild steel butt hinges, medium weight, cold rolled . |
| 29 | S & F Alumininum anodised barrel tower bolts of extruded section 200 mm size. |
| 30 | S & F Alumininum anodised barrel tower bolts of extruded section 125 mm size. |
| 31 | S & F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long. |
| 32 | S & F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long. |
| 33 | S & F Extruded aluminium alloy handles, fabricated type, anodised 75 mm long. |
| 34 | S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed Length of bolt 300mm. |
| 35 | M & L for preparing surfaces of new wood or wood based surfaces any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer. |
| 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 37 | S & F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165. |
| 38 | M & L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete |
| 39 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 40 | S & F 12mm mesh Wire netting of galva nisedsteel wire, 1.40mm dia inrepairs complete all as specified and directed. |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads. |
| 42 | S & F Sheet glass, ordinary quality, 4 mm thickness and glazing with oil putty or wooden beading in square n. exc. 0.5 Sqm each . |
| 43 | S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple on any type of door/windows. |
| 44 | S & F in repairs 20mm laying of CPVC pipe & all fittings / fixtures concealed to walls and ceilings or laid in floors complete all as specified. |
| 45 | S & F in repairs 25mm laying of CPVC pipe & all fittings / fixtures concealed to walls and ceilings or laid in floors complete all as specified. |
| 46 | S & F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixing complete. |
| 47 | S & F in repairs vitreous china wash hand basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets,cutting for and pinning in ends of brackets or erecting of fixing of supply and waste pipe all as specified. |
| 48 | S & F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) with plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device all as directed. |
| 49 | S & F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc. |
| 50 | S & F in repairs brass CP shower rose with or without swivel joints 125 mm size. |
| 51 | Supply and fix Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15 mm bore and fixed in repairs all as specified. |
| 52 | S & F in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15 mm bore. |
| 53 | S & F in repairs 15mm Bib taps,long body,chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 54 | S & F in repairs 15mm 2-in-1 tap,chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 55 | S & F in repais pillar taps long body 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe . |
| 56 | S & F in repais Push button tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/20mm- 75gms) . |
| 57 | S & F in repairs PVC connection 15mm dia with PTMT nuts of length 450mm. |
| 58 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete. Make :Parry ware Cat No .T9937A1 or equivalent. |
| 59 | S & F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device. |
| 60 | Dismantling water tanks of 1000 ltr capacity and removing to store |
| 61 | S & F Rotational moulded triple layer polyethylene water storage tanks (cylindrical vertical with closed top) 1000 ltrs capacity of white colour hoisted and fixed in position all as specified in SSR Part I |
| 62 | S & F in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) |
| 63 | S & F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe |
| 64 | S & F Corner glass Shelves (with brackets) and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) fixed in epairs, Make : Jaquar (Cat No-CAN-1173 or equivalent) . |
| 65 | S & F Bath rooom PVC cabinet mirror of size 350mm x 450mm fixed in repairs. (Make : Prayag Cat part No 551 or equivalent) |
| 66 | S & F in repairs sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and as directed. |
| 67 | S & F for 0.8mm thick stainless steel plate rack size 0.90 x 0.60 m fixed in repairs with steel screws complete. |
| 68 | M & L for 18/19 mm Pre laminated particle boards, exterior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed in repairs with screws to timber work for Cup Boards complete. |
| 69 | M & L for 6mm thick external teak wood lipping fixed to18/19mm thick particle boards with nails. |
| 70 | S & F continuous (piano) hinge stainless steel, bright finish width of flaps 40mm (when open) all as directed. |
| 71 | S & F 75 mm size extruded aluminium alloy handles, fabricated type, anodised. |
| 72 | S & F Aluminium anodised Hasp and staple, safety type of size 75mm. |
| 73 | S & F in repairs 25mm dia stainless steel decorative fancy type curtain rods all as specified and as directed. |
| 74 | S & F stainless steel decorative fancy type end bracket and knob for 25mm curtain rods all as specified and as directed. |
| 75 | S & F cast iron door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repairs. |
| 76 | M & L for brass mortice lock, vertical type, 2 lever of size 100 mm fixed in repairs. |
| 77 | S & F in repairs 150mm double action spring hinges for door shutters, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed. |
| 78 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness below or above ground level. |
| 79 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises. |
| 80 | M & L for providing 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) |
| 81 | M & L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x 250 x 7mm/450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl cement screed 10 mm thick in CM 1:3 all as specified and directed. |
| 82 | M & L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:4 complete all as directed. |
| 83 | M & L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:4 complete all as directed. |
| 84 | M & L Dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match jointed including cement screed 15 mm thick in CM 1:4 all as directed |
| 85 | M & L Tropicana Double Charged Virified Ceramic tiles glossy finished (1000x1000mm) 10 mm thick (square/ rectangular) polished, set and jointed in neat cement slurry and pointed in white or coloured cement to match jointed including cement screed 15 mm thick in CM 1:4 all as directed |
| 86 | Demolition Stone slabs and tiles laid bedded and pointed in any mortar of anydescription or thickness in floors, aprons etc. |
| 87 | M & L for Machine cut Kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15 mm thick screed bed in CM 1:4 complete all as directed |
| 88 | All as per item no 87 above, but in risers of steps, skirting etc |
| 89 | M & L for Marble work 18 to 20mm thick Abu plain/Makrana doogri/Makrana Adanga/Green Marble/Black Marble for any type (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and the like CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble Makrana white over 15 mm thick screed bed in CM 1:4 and providing edge moulding complete all as specified and directed. |
| 90 | Dismantling Single layer Mangalore pattern or similar tiles in roofing |
| 91 | M & L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry |
| 92 | M & L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed. |
| 93 | Removing the existing roof treatment of any description completely and removel of all the debris from site and rubbish off the premises complete all as directed. |
| 94 | M & L cement Sceed bed 20mm thick in CM 1:4 with using waterproofing liquid as per manufacturers instructions.(WPC Measured and paid separately) |
| 95 | M & L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.80 Kg/Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufactures : IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP. Note : The work shall be carried out be authorised applicators of manufactures |
| 96 | Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. |
| 97 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as spcd. |
| 98 | S & F UPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors/wall all as directed. |
| 99 | S & F UPVC (SWR) bend 110 mm bore complete all as specified and as directed. |
| 100 | S & F UPVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall. |
| 101 | S & F UPVC (SWR) bends 75 mm bore complete all as specified and as directed. |
| 102 | S & F UPVC (SWR) floor trap plain 75 mm dia outlet with grating including jointing with solvent cement complete all as specified and as directed. |
| 103 | S & F UPVC (SWR) vent cowl 110 mm. |
| 104 | Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site all as directed. |
| 105 | M & L 75mm thick cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection & paving, finished even & smooth without using extra cement. Please Enable Macros to View BoQ information |
