|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: REPAIR TO FLOORING, PLASTERING, TOILET FITTING, JOINERY AND REPLACEMENT/ REPAIR TO E/M INTERNAL FITTINGS/FIXTURES & WIRING AT BG & HAMIRPUR UNDER AGE B/R-I OF GE 881 EWS Contract No : GE/PNH-110/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R PORTION:- Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tile to store and rubbish off the premises omplete all as specified and directed. |
| 3 | Glazed ceramic coloured tiles 450mmx350mm x7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick plaster as backing layer in cement mortar 1:4, complete all as specified and directed. |
| 4 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 5 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed. |
| 7 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor/path/hardstanding, finishing surface even and fair, complete all as specified directed. |
| 8 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 9 | Vitrified ceramic light shade tiles 10 mm thick (square/rectangular) area of each tile not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 11 | 15mm thick rendering in CM 1:4 on fair faces of brick work or stone masonry surfaces & finishing the surface even and smooth without using extra cement, including mixing of WPC @ 200 ml/50Kg of cement complete all as specified and directed. Note:- Supply only WPC shall be measured and paid separately. |
| 12 | 10mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 13 | 5 mm thick rendering in CM 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 15 | Preparation of new plastered surface of any description and applying two coats of cement base paint in camouflage pattern over a coat of primer complete all as specified and directed. Note:- Comouflage pattern shall be approved by GE |
| 16 | Preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over (2mm min thickness) wall care putty, complete all as specified and directed. |
| 17 | Preparation of new plastered surfaces of ceiling and applying two coats of white wash on ceiling complete all as specified and directed. |
| 18 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed. |
| 19 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 20 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed. |
| 21 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 22 | Rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top), ISI marked hoisted and fixed in position all as spd in SSR Pt-I, of capacity 500 Ltrs including making necessary connections,fittings including dismantling existing unserviceable tank and removing from site complete all as specified and as directed. |
| 23 | Rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top), ISI marked hoisted and fixed in position all as spd in SSR Pt-I, of capacity 1000 Ltrs including making necessary connections,fittings including dismantling existing unserviceable tank and removing from site complete all as specified and as directed. |
| 24 | Nipple suitable for HDPE water tank (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms), 150mm long with washer, complete all as specified and directed. |
| 25 | Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 ltrs and n.exc 500 ltrs including from mouths of circulating pipes, etc.and washing twice with clean water and finaly with bleaching complete all as specified and directed. |
| 26 | Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 ltrs and n.exc 1000 ltrs including from mouths of circulating pipes, etc.and washing twice with clean water and finaly with bleaching complete all as specified and directed. |
| 27 | Supply and fixing in repairs 20mm bore, PTMT ball valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 28 | Supply and fixing in repairs 15mm bore, PTMT ball valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 29 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed. |
| 30 | Bib tap standard of PTMT any colour high pressure screwed for 15mm bore iron pipe or for brass ferrule and fixed in repairs (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 31 | Supply and fixing in repairs 15mm bore Stop valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed , complete all as specified. |
| 32 | 15mm bore Stop valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed, including taking down existing unserviceable tap/ valve complete all as specified. |
| 33 | 15mm brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe fixed in repair, complete all as specified. |
| 34 | 15mm brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe including taking down existing unserviceable tap/ valve, complete all as specified. |
| 35 | Soap dish, vitreous China white, approximate size 160x 160x90mm and fixed to plug with chromium plated brass screws, fixed in repair complete all as specified and directed. |
| 36 | Supply and fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 37 | Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 38 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and syphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified and directed. |
| 39 | PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints fixed in repair , complete all as specified and directed. |
| 40 | Supply and fixing in repair Vitreous china Wash hand basin, white, flat back of size 580x450mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc fixed in repair, complete all as specified and directed. |
| 41 | PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repair, complete all as specified and directed. |
| 42 | Vitreous china bowl urinal flat back small- normal, size of 465X355X265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and pointing around urinal back in cement etc excluding flushing cistern, flush pipe and waste pipe, fixed in repair, complete all as specified and directed. |
| 43 | Supply and fixing in repairs, Vitreous China Urinal, Half stall type, white (including flushing cistern, flushpipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 44 | 32 mm bore PVC waste pipe, complete all as specified and directed. |
| 45 | PVC (SWR) pipes 110mm dia, Type B any length single socketed with rubber ring joint laid in trenches/floor or walls complete all as specified and directed. |
| 46 | PVC (SWR) bends any radius 110mm bore fixed, complete all as specified and directed. |
| 47 | PVC (SWR) junction single (single T) 110mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 48 | PVC (SWR) vent cowl for 110mm dia fixed in repair, complete all as specified and directed. |
| 49 | PVC (SWR) pipes 75mm dia, Type B any length single socketed with rubber ring joint laid in trenches/floor complete all as specified and directed. |
| 50 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified. |
| 51 | 18-20mm thick granite (of approved type /colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform,steps, laid over and including 20mm thick cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement 1:2 with admixture of pigment to match the colour of granite stone including cutting and moulding the edges, complete all as specified and directed |
| 52 | 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs, including necessary cutting complete all as specified and directed. |
| 53 | 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs, including necessary cutting complete all as specified and directedd. |
| 54 | 15mm bore UPVC/PVC, globe/gate valves, with lever type, screwed both ends for pipe and fixed in repairs, including necessary cutting complete all as specified and directed. |
| 55 | 20 mm bore UPVC/PVC, globe/gate valves, with lever type, screwed both ends for pipe and fixed in repairs, including necessary cutting complete all as specified and directed |
| 56 | Floor mounted white western WC cute of size 360x360x710mm with slim soft close seat cover and dual flush of 6 ltrs with S or P trap including making connections and fixed in position complete in all respect as specified. |
| 57 | Preparation of old plastered or unplastered surfaces of any description and applying one coat of apex paint in camouflage pattern complete all as specified and directed. Note:- Camouflage pattern shall be approved by GE |
| 58 | One piece plastic water saving toilet cistern kit compressing dual flush valve, adjustable fill valve (ball back), chrome finish push button, complete with all internal fittings, washers and accessories, suitable for one piece WC, including dismantling of unsv part complete. |
| 59 | Rain overhead shower 300x300mm square shape single flow (body & face plate stainless steel) with rapid cleaning system over & including shower arm 400x25x25mm square shape for wall mounted shower with flange, and all necessary accessories, fixed in repair complete all as specified and directed. |
| 60 | Supply and fix in repair 3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 61 | Supply only transparent glazing silicone sealant in 300gm catridge suitable for fixing glass pane to steel, aluminium window frames, having excellent adhesion, weather resistance and UV stability complete all as specified and directed. Make:- Sika/pidilite/Dr.fixit/Asian Paint |
| 62 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 63 | Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 64 | Stainless butt hinges, medium weight,100mm long, complete all as specified and directed. |
| 65 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 66 | Aluminium alloy handles, cast type, anodised of size 125mm and fixed, complete all as specified and directed. |
| 67 | E/M PORTION:- Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose, celing fan etc complete all as specified and directed. |
| 68 | M&L for point wiring with two single core 1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of approporiate size and all requisite accessories such as PVC elbow, Tee, collars, bends etc with PVC terminals box& cover for mounting switches, sockets, fan regulator etc complete all as specified and as directed for the following: |
| 69 | One light/fan point controlled by one switch 6 amp one way complete all as specified and directed. |
| 70 | One light point controlled by two switch 6 amp two way switch complete all as specified and directed. |
| 71 | One 3 Pin, 6 amp socket outlet on same board complete all as specified and directed. |
| 72 | One 3 Pin, 6 amp socket outlet on independent board complete all as specified and directed. |
| 73 | One bell point controlled by one bell push button complete all as specified and directed. |
| 74 | All as per item No. 67 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 15/20 amp multipurpose socket outlet on independent board complete all as specified and directed. |
| 75 | Piano Type switch ,modular, 6 amp single pole flush type one way complete all as specified and directed. |
| 76 | Piano Type switch ,modular, 16 amp single pole flush type one way complete all as specified and directed. |
| 77 | Switch socket outlet modular type 3 pin 5 amp flush type complete all as specified and directed. |
| 78 | Switch socket outlet modular type 3 pin 15 amp flush type complete all as specified and directed. |
| 79 | Modular step type fan regulator , electronic type, 120 watt 2 module complete all as specified and directed. |
| 80 | Modular white cover plate with frame for 3 module complete all as specified and directed. |
| 81 | Modular white cover plate with frame for 4 module complete all as specified and directed. |
| 82 | Modular white cover plate with frame for 6 module complete all as specified and directed. |
| 83 | Modular white cover plate with frame for 8 module complete all as specified and directed. |
| 84 | Modular metal flush box 3 module all as specified and directed. |
| 85 | Modular metal flush box 4 module all as specified and directed |
| 86 | Modular metal flush box 6 module all as specified and directed. |
| 87 | Modular metal flush box 8 module all as specified and directed. |
| 88 | Piano Type switch , 1 way, 6 amp, flush type complete all as specified and directed. |
| 89 | Piano Type switch , two way, 6 amp, flush type complete all as specified and directed. |
| 90 | Piano Type switch , 1 way, 16 amp, flush type, single pole complete all as specified and directed. |
| 91 | Socket outlet 2 in 1, 3 pin 6 Amps, flush type complete all as specified and directed. |
| 92 | Socket outlet 2 in 1, 3 pin 6 Amps and 16 Amps, flush type complete all as specified and directed. |
| 93 | Ceiling rose, 3 phase,bakelite 65x50mm two or three therminals complete all as specified and directed. |
| 94 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 95 | Bell push flush type switch, 230 volt complete all as specified and directed. |
| 96 | Electric bell ding dong type 230 volts AC supply complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and fix in repairs Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed. |
| 98 | Supply and fixing in repair Inverter LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours and connecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as specified and directed. |
| 99 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 100 | Supply and fixing in replacement recess/surface mounting LED flat panel 2'x2' with high efficient LED & glare free full window opal diffuser of 36 watt incl connecting up twin core twisted flexible copper conductor cable complete with all accessories as specified and directed. Note:- The LED rod should have PF>0.9, input voltage 90-300V, Ip-20, LM 80 stranded luminaries efficiency 100 lumen/watt |
| 101 | Supply and fixing in repairs LED bulk head 10W with pressure die cast aluminium housing high efficient LEDs and enclosed with milky diffuser IP 66 protection, PF 0.9 CRI> 70, L70 with all accessories pre wired and connecting with twin core twisted flexible copper conductor cable complete all as specified and directed. |
| 102 | S&F in repair gate light fittings, outdoor type, high power LED 25 Watt, pre-wired with suitable for pole mounting complete with all accessories all as specified and directed. |
| 103 | S&F in repair of non metallic rigid PVC conduit of size 25mm dia incl all accessories use for fixing of conduit on wall and ceiling etc, complete all as specified and directed. |
| 104 | S&F in replacement of PVC casing caping of size 25 mm incl all fixing accessories, complete all as specified and as directed. |
| 105 | S&F in replacement of flexible PVC conduit of approved quality of size 25 mm dia bore with fixing materials complete, all specified and as directed by Engineer-in-charge. |
| 106 | Supply only copper Flexible twin twisted wire, PVC, 10/0.2 gauge complete all as specified and directed by Engr-in-Charge. |
| 107 | Supply only tape insulation 20mm x 25 mtrs, complete all as specified and directed. |
| 108 | Supply and fixing in repair Plug top 15 Amps, 230Volt, 50Hz complete all as specified and directed. |
| 109 | Supply only flexible LED Strip light with adapter, water proof, multi-color, suitable for 230V, 50Hz complete all as specified and directed. |
| 110 | Sub main wiring with single core cable 2 x 4 sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade drawn through PVC casing/caping 25 mm dia ISI marked fixed on wall/ceiling, alongwith 1x2.5 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly , complete all as specified and directed.Note:-Two runs of 4sqmm cable alongwith one run of 2.5sqmm PVC insulated copper conductor as earh wire incl casing caping shall be measured as one unit. |
| 111 | Sub main wiring with single core cable 2 x 6 sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade drawn through PVC casing/caping 25 mm dia ISI marked fixed on wall/ceiling, alongwith 1x4 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly , complete all as specified and directed.Note:-Two runs of 6 sqmm cable alongwith one run of 4sqmm PVC insulated copper conductor as earh wire incl casing caping shall be measured as one unit. |
| 112 | Distribution board double door type(for incoming MCCB & outgoing MCBs) TPN 4 way vertical type sheet steel powder painted with bus bar ,neutral link & earth bar etc. with IP 43 degree of protection flushing in wall including connecting up all incoming and outgoing cables/circuit wiring complete all as specified and as directed. |
| 113 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 4 Ways, Double Door (IP-43), with neutral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 114 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door (IP-43), with neutral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 115 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 12 Ways, Double Door (IP-43), with neutral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 116 | S&F in replacement MCCB four pole 415 Volts, 100 A, 25 KA complete all as specified and directed. |
| 117 | S&F in replacement MCB three pole and neutral isolator 415 Volts, 63 A, 25 KA complete all as specified and directed. |
| 118 | S&F in replacement MCBs 5-40 amp SPN C curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB , complete all as specified and directed. |
| 119 | S&F in replacement MCBs 5-40 amp SP C curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB ,complete all as specified and directed. |
| 120 | S&F in replacement MCBs isolator 40-63 amp SPN C curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB, complete all as specified and directed. |
| 121 | Earthing complete with galvanized steel earth plate electrode 600x600x6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected toand including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6) type C1 chamber,pre-cast RCC slab 50mm thic in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed. Note : The Earth result should be less than 3 ohm and the result will be checked in presence of MES Rep. |
| 122 | S&F in replacement plug top & socket with sheet metal enclosures Single pole including one MCB 20 Amp, 240 Volts,10 KA complete all as specified. |
| 123 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 4 sqmm solid aluminium conductor, complete all as specified and directed |
| 124 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 6 sqmm solid aluminium conductor, complete all as specified and directed |
| 125 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm solid aluminium conductor, complete all as specified and directed |
| 126 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 16 sqmm solid aluminium conductor, complete all as specified and directed |
| 127 | Taking out of ceiling/exhaust fan/Air circulator fan from AGE E/M store yard/Site and transport to reputed workshop for rewinding the fan starter with the same gauge of copper winding wire as well as number of turns and reassembling the fan after replacing the unserviceable spares like bushes, shafts, fasteners, bearings, capacitors and flexible cord for putting fan in serviceable condition including refixing the same after carrying out necessary repairs to original place all as directed by Engineer-in-Charge of following sizes:- (Bushes, shafts, bearings, capacitors, flexible wires,painting etc. shall be measured and paid separately) |
| 128 | Ceiling Fan (1200/ 1400 mm) size of any make |
| 129 | Exhaust Fan of 230/300mm size of any make. |
| 130 | Replacement of capacitor 4.0/2.5 mfd capacity (condenser) of exhaust and ceiling fans complete all as specified and directed. |
| 131 | 3 core PVC flexible copper conductor cable(cord) of 0.5 Sqmm complete all as specified and directed. |
| 132 | GM bushes for ceiling/exhaust fans of various sizes complete all as specified and directed. |
| 133 | Blades for ceiling fans of 1200mm/1400mm size of any make complete all as specified and as directed. |
| 134 | M.S. clamps for hanging ceiling fan with nuts, checknuts and bolts 2\\" x 3/8\\" : 02 Nos. including rubber rings(reel) for hanging ceiling fans complete all as specified and as directed. |
| 135 | Steel body exhaust fan 300 mm sweep single phase 230 volts including flap and fixing arrangement as per site requirement complete all as direcected. |
| 136 | S&F in repairs energy efficient LED street light fitting (beamer), 45W, input voltage 230VAC, 50Hz with ingress protection IP 65, CRI>70, PF>0.95, minimum 50000 burning hours, THD> 20, CRCA housing including all fixing arrengment like clamps, nuts, bolts, washers, 90W LED lamp with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. for fixing at any locations complete all as specified and directed. |
| 137 | S&F in replacement street light GI pipe bracket 40mm dia 1.50m length (ISI marked) light grade bend to shape with two Nos MS clamp duly painted nuts and bolts etc |
| 138 | LED lamp 9 watt complete all as specifed and directed. |
| 139 | LED lamp 7 watt complete all as specifed and directed. |
| 140 | Ceiling fan 1200mm sweep with 3 blades, electric driven single phase 240 volt 5 str rated, BEE energy effecient and connecting up including provision of cable from ceiling rose or connector to fan to make it functional complete all as specified and directed. |
| 141 | Disconnecting electric & water connection to geyser of cap 25/50/35 ltr, taking down, from existing position, dismantling and inspecting all the parts, for its serviceability, cleaning of serviceable parts i.e. Heating elemet, base assy, connecting lead, thermostat, electrical contact, electric wiring, indicators, safety valves etc and refixing, replacement of unserviceable parts, re assembling, remounting, reconnecting with electrical & water connectionn and testing complete. Note:- (i) The defective parts to be replaced shall be measured and paid separately. (ii)Cost of minor items i.e. Screws, nut & bolts etc shall be deemed to be included in the above item. |
| 142 | Heating element 2.0 KW, ISI marked with gasket suitable for as existing size, type and make of geyser under repair, complete all as specified and directed. |
| 143 | Heating element 1.5 KW, ISI marked with gasket suitable for as existing size, type and make of geyser under repair, complete all as specified and directed. |
| 144 | Thermostat ISI marked suitable for existing make of the geyser under repair of cap 50/25 /35 Ltrs., compelte all as specified and directed. |
| 145 | Indicator lamp as per existing make and size, complete all as specified and directed. |
| 146 | Geyser safety valve (pressure release valve) for the exsiting make & capacity of geyser, complete all as specified and directed. |
| 147 | Geyser pipe connection heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature for existing geyser complete all as specified and directed. |
| 148 | Aluminium/cromium type flexible connection heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature for existing geyser complete all as specified and directed. |
| 149 | Inner tank made out of steel sheet conform to IS suitable for 25 ltrs capacity of geyser of different makes vertical type all as specifie and directed |
| 150 | Inner tank made out of steel sheet conform to IS suitable for 35/50 ltrs capacity of geyser of different makes vertical type all as specifie and directed |
| 151 | Supply and fixing in replacment of non return valve made out of brass fixed in veritcal complete all as specified & directed. |
| 152 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 153 | New base assembly with inlet and outlet pipe made out of steel base plate with gasket and proper size of nuts, bolts and washer etc suitable for 25 ltrs capacity of geyser complete all as specified and directed. |
| 154 | New base assembly with inlet and outlet pipe made out of steel base plate with gasket and proper size of nuts, bolts and washer etc suitable for 35/50 ltrs capacity of geyser complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
