|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M & L for Non-Skid coloured ceramic tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick avg screed bed in CM 1:6 complete all as specified and directed. |
| 3 | M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, laid over and incl 15 mm thick avg screed bed in CM 1:6 complete all as specified and directed. |
| 4 | M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles, laid over and incl 15 mm thick avg screed bed in CM 1:6 complete all as specified and directed. |
| 5 | Description all as specified in item No 4.00 light shade tiles but on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering CM (1:4) complete all as specified and directed. |
| 6 | M & L for Vitrified coloured ceramic tiles any shade 10mm thick, square/ rectangular (with pattern and boarder work as required at site), area of tiles exceeding 0.42 Sqm and not exceeding 1.00 Sqm each tiles as in flooring, over and incl 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match over or filling spacers as per requirement at site or as directed including designer tiles pattern work between the tiles complete all as specified and as directed by Engr-in-Charge or GE, complete all as specified and as directed. |
| 7 | M & L for glazed coloured ceramic tiles in vertical surface as in dado, skirting etc area of each tile exc 0.42 Sqm but not exc 1.00 Sqm (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and incl 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 8 | M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, over and incl 10 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 9 | M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed. |
| 10 | S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed. |
| 11 | S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed. |
| 12 | S&F steel water tubing galvanised 25 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed. |
| 13 | S&F 20 mm bore CPVC pipe SDR 11 plain including plain CPVC SDR 11 fittings such as tee, elbow, socket, union etc. ISI marked and fixed complete to walls and ceiling or laid in floors/roofs, including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old any type tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed. complete all as specified and as directed. |
| 14 | S & F in repair 25 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed |
| 15 | S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed |
| 16 | S & F in repair 15 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed |
| 17 | S&F in repair 15mm angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. ( Make : Hindware /Jaquar and approved by GE) |
| 18 | S & F in repairs 15 mm bore bib tap (long body), fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. (Make : Hindware /Jaquar and approved by GE) |
| 19 | S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-167 KNB and as approved by GE |
| 20 | S&F in repairs brass chromium plated wall mixture 3 in 1 system with provision for hand shower and over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and as approved by GE |
| 21 | S&F in repair Brass CP sink mixer with swinging spout (wall mounted model with connecting legs & wall flangesfor making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-309 KNM and as approved by GE |
| 22 | S & F in repair Two way bib tap 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make - Jaquar /hindware and approved by GE |
| 23 | S & F in repair 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 or equivalent in Jaquar/Hindware/Parryware as approved by GE). |
| 24 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm. |
| 25 | S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm. |
| 26 | S & F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 27 | S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. |
| 28 | S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in jaquar / Hindware/Parryware or equivalent make as per approved make list).) |
| 29 | S & F in repair SS soap dish, fixed in repairs, complete all as specified and as directed. |
| 30 | S & F in repair Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed. |
| 31 | S & F in repair Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. |
| 32 | S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. |
| 33 | S & Fin repair CP shower rose fancy type 150mm x 150mm size with 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. |
| 34 | S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed. |
| 35 | S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed. |
| 36 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 430mm x 330mm x 160mm ®/450mm x 330 mm x 160mm |
| 37 | S & F in repair double bowl sink made of stainless steel 1mm thickkitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 38 | S & F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed. |
| 39 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 40 | S & F in repair SS toilet paper holder, complete all as specified and as directed. |
| 41 | S&F in reapir Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge . |
| 42 | S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap , seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed. |
| 43 | S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware) |
| 44 | S & F in reapir Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with all fitting and fixture complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware/cera) |
| 45 | S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed |
| 46 | S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed. |
| 47 | S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) |
| 48 | M &L for making good PCC of Column, chajja, Parapets of roof, facia, drops with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metre including Taking down cement plaster / necessary form work and scaffolding upto 2nd floor including fixing of wire netting where required to match the existing surfaces. |
| 49 | M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed. |
| 50 | M & L 10-12 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, including taking down of existing cement or cement lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed. |
| 51 | S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed (Note : Pipe work executed in saft area upto the 10 story building also ) |
| 52 | S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed |
| 53 | S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed. |
| 54 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 55 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 56 | M & L for Fabrication & fixing to 17/18 mm thick HDHMR boards with white laminated colour on both sides, fixing in Modular wardrobe, cupboard partitions , bottom , back side etc of Modular kitchen cabinet & wardrobe/ cupboard including taking down old any type cupboards, shelves etc all as specified and directed. (Make :Action tesa or equivalent) |
| 57 | S&F Stainless steel basket (plain) of size 370mm x 485mm x 150mm made of min 4mmdia stainless steel wire approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 6121 or equivalent in IPSA/Hettich as approved by Engr-in-Charge). |
| 58 | Stainless steel thali basket of size 370mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6136 or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 59 | S&F Stainless steel Cutlary basket of size 370mm x 485mm x 100mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 6132, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 60 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed. |
| 61 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 62 | Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed. |
| 63 | Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed. |
| 64 | S & F MS framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified. |
| 65 | S & F 1.25 mm thick Pressed steel frames size 105 mm x 60 mm for doors with one rebates including necessary fixing lugs/ hold fasts with PCC in walls/RCC etc , 3 or 4 No's heavy MS hinges , lock strike plate, etc and including back filling with PCC in 1:3:6 (using 12.50 mm graded stone aggregate) completed all as specified & directed |
| 66 | S & F 1.25 mm thick Pressed steel frames size 125 mm x 60 mm for doors with double rebates including necessary fixing lugs/ hold fasts with PCC in walls/RCC etc , 6 or 8 No's heavy MS hinges , lock strike plate, etc and including back filling with PCC in 1:3:6 (using 12.50 mm graded stone aggregate) completed all as specified & directed |
| 67 | S&F flush door shutter 35mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed. |
| 68 | S&F flush door shutter 35mm thick solid core construction with Block board and both faces covered with decorative face veneer with lipping/ frame to match etc complete all as specified and as directed. |
| 69 | S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats |
| 70 | S&F Factory made, Plain framed panelled shutters of second class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed. |
| 71 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm prelam coloured PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 72 | S & F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame at site as per secification & drawing |
| 73 | M&L Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated frames sliding track, bottom , sides and top weighing not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, including taking down old existing window complete all as specified and as directed. |
| 74 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 4.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge.(Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 75 | S&F mild steel butt hinges medium weight cold rolled of size 100 mm and fixed to shutters. complete all as specified and as directed. |
| 76 | S & F 100mm size butt hinges stainless steel complete all as specified and as directed. |
| 77 | S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed |
| 78 | S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 79 | S & F 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed |
| 80 | S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed. |
| 81 | Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads. |
| 82 | S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 83 | S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 84 | S & F 5 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 1 Sqm in each pane fixed complete all as specified and directed. |
| 85 | S & F 8 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 2 Sqm in each pane fixed complete all as specified and directed. |
| 86 | S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 87 | S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. Please Enable Macros to View BoQ information |
| 88 | S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. Please Enable Macros to View BoQ information |
