Name of Work:- Supply and Erection of High Mast Light at Palanipet Gandhi Road Ward No 30 in Arakkonam Municipality.
Sl. No.
Item Description
1
Design, Supply erection testing and handing over of High Mast structure Bajaj/Philips/make or equlvalent with required number of continuously tapered hot dip galvanizedsteel polygonal sides sections with telescopic strip to a total height of 12 meters capableof staning the maximum wind Pressure at the site with single flange base plate securedwelded the bottom of the base mast section with vertically movable hot di galvanized lantern carriage and accessories such as electrical junction box brackets for providing |& Nos of flood light luminaries with control gear box completed bed fame assembly,|Pully drive, stainless steel wire ripe single double drum self lubricating winch arrangement suitable for raising and lowering the luminaries camage ring flexible multicore power cable and necessary high tensile hot dipped galvanized foundation bolt & nuts along with washers and anchor plates and templates accessorieds in the Mast a)|Design and casting suitable foundation with 1:2:4 mix, RCC concrete with 30 cm projection above the ground level with 2 mts depth with necessary for 3 phase 415 V So 12 for rasing and lowering of the lantern carriage complete to operate all fitting mounted in the base to couple with winch-1 set C) Feeder Pillar box comprising 0.90m x 0.45mxl.20m floor Alframe with 63A TPN main switch 1No 63A fuse unit 3 Nos 63A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor-1 set D) Neon aviation obstruction light (glow world -1 No E) 2 Nos of special al earth electrodes with copper plate 300x300x3mm and copper flat (1\\"x1/4\\") inter connection as per ISS complete with earth connection-1 set F) Hot dip galvanized lightening arrestor-1No G) Flood light luminaries of specially Heavy type water proof dust proof integral luminaries fitting provided with 200 Watts LED light fitting glow worldwith 20watts LED Bulb with drives, Alglas coated reflectors with cable connection etc comnlete as ner standard specification 6no
2
Supply and fixing of brass cable grand for 4x16 Sqmm PVC Armoured LTUG cablewith earth connection
3
Supply and laying of 4x16 sq.mm PVC Armoured LTUG cable in a trench to be excavated at a depth of 0.75mtr putting 0,15mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (as per Standartd Specification)
4
Supply and clamping of 4x 16 sq.mm PVC LTUG Armoured cable on post or on wall with Ms clamps (as per site condition)
5
Supply and run of 1x 1/8\\" (25mmx3mm) tinned copper flat with necessary clamps / supports on allfloor/ground for earth connection
6
Earthing as per ISl specification with an earth electrode of 2.1 metre class \\"B\\" G0 pipe of dia not less than 40mm with coper earth plate of 125rmm x50mmx6ômm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cOver slab for the brick Masonry
7
Construction of platform around high mast Pillar lighting Brick work in cement motor 1:5 mix 0.90meter depth including all other charges etc complete
8
GST 18% Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
