|
| 1 | Earthwork excavation in all soils and sub soils except hard rock requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete as per SS 20 B TNDSS NO: 23&24VI (S2), VII 9,10 |
| 2 | Plain cement concrete Using 1:4:8 mix ( One cement , four Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII |
| 3 | Supplying, fabricating and placing in position of mild steel or TMT rods, including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per SS. TNDSS NO: 97 V,VI (S6) VII (S6) VII-3 |
| 4 | Reinforced cement concrete 1:11/2:3 (one cement one and half sand and three aggregate) using 20mm size I.S.S. metal including cost conveyance of materials to site and all labour charges etc., mixing laying consolidating curring etc., but excluding cost of steel etc., complete as per standard specification as per TNDSS NO: 30 V,VI (S3) VII-3 |
| 5 | Supplying and erecting steel centering for sides and soffits including supports and strutting upto 3.29 m height for plain surface as RCC slabs, rectangular tee (or) elbeams, lintel, bed block stair case waist slab, landing slab, etc., complete as per standard specification - 10m2 as per TNDSS & Morth specification No:30 & 36 |
| 6 | Plain surface |
| 7 | RCC work |
| 8 | Square column |
| 9 | Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of III class Country bricks of size (8 3/4\\"x4 1/4\\"x 2 3/4\\") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification TNDSS specification No.31 & 31C |
| 10 | Plastering in cement mortar 1:4 (one cement Four sand) using 12mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. [MoRTH Specification: Clause:1000/1300] |
| 11 | Supply and delivery of following PVC / G.I pipes and specials |
| 12 | 25mm PVC Tee |
| 13 | 25mm PVC pipe |
| 14 | 25mm PVC elbow |
| 15 | 25mm Tank nipple |
| 16 | 25mm PVC FTA |
| 17 | 25mm x 20mm PVC reducer |
| 18 | 110mm PVC Tee |
| 19 | 110mm PVC pipe |
| 20 | 110mm PVC elbow |
| 21 | 90mm PVC elbow |
| 22 | 90mm PVC pipe |
| 23 | 75mm PVC pipe |
| 24 | 75mm PVC elbow |
| 25 | Plastering in cement mortar 1:3 (one cement three sand) using 10mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. [MoRTH Specification: Clause:1000/1300] |
| 26 | Weathering course with concrete brocken brick jelly 20mm size in pure slacked lime (no sand to be added) over roof slab the proportion of brick jelly to lime being 32 to 12.5 well beaten with wooden beaters for giving required slope and thickness as directed by the departmental officers. |
| 27 | Terrace flooring with Hydraulic pressed tiles of size 20*20*2cm laid in c.m 1:3 (one cement three sand) mixed with crude oil 10 %, by weight of cement and pointed with same oiled mortor etc complete as per SS |
| 28 | Supply and fixing of Cuddapah Slab 20 / 30mm Thick |
| 29 | Paving the floor with Plain/Design Ceramic tiles ( Colour and shade as directed ) of Stain Free Nano Polish Vitrified Tiles of size 600 x 600 x 8mm in all floors over a base layer of cm 1:3 mix 20mm thick laid in situ and pointed with same coloured cement ( white cement mixed with colouring pigment ) neatly and fixed in position so as to make it perfectly smooth and shining,to the alignment etc.complete complying with standared specifications and as directed by the departmental officers. The sample colour and shade of the ceramic tiles should be got approved from the departmental officers before use in the works |
| 30 | Dadooing with glazed tiles of 300mm*200mm*6mm size of approved quality and colour set in c.m 1:2mix (one cement and two sand) 10 mm thick and pointing with white cement using 0.4 kg /m2 neatly as directed -including cost of all materials and labour charges etc complete as per SS |
| 31 | Supplying & Fixing in position of white glazed Indian type water closet with 'P' (or) 'S' trap and Orissa slope set in brick jelly cement concrete 1:4:8 100mm thick using 20mm thick brick jelly ISS gauge and finished to sludge out any leakage and defalut including cost of WC 'P' (or) 'S' trap and foot rest etc., complete |
| 32 | Supplying and fixing in position colour Europen water closet with low level flushing tank of 10 lit capacity of best quality and approvel make with 100mm 'p' or 's' trap with double flapped rigid PVC seat cover with CP brass etc. Complete complying with standard specifications and as directed by the department officers ( EWC should got approvel by the executive work before use on work.) |
| 33 | Supplying and fixing in position Indian make white glazed earthenware squating type urinal of best quality and approved make including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The squatting urinal should be got approved by the Executive Engineer before use on works). |
| 34 | Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter. |
| 35 | Supply and fixing Terracota Jally of size 20 x 20 x 0.75mm of approved pattern including pointing finishing, curing etc. complete complying with standard specification directed by the departmental officers. |
| 36 | Supply and fixing of mild steel grill works for steel door etc including redoxide priming coat and cost of materials and all labour charges etc. complete. |
| 37 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc. (1000 litre) |
| 38 | Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5AFT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) (SD-25) |
| 39 | Wiring with 2 x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, wtih 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD 38) |
| 40 | Supply and fixing of 230mm SL Bracket with fancy glass shade with 7W / 9W LED bulb (SD-82) |
| 41 | Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358) |
| 42 | Plain Cement concrete 1:2:4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per standard specifications. TNDSS NO: 30 V,VI (S3) VII-3 Please Enable Macros to View BoQ information |
