|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kind of soil |
| 2 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete |
| 3 | SUB-HEAD : CEMENT CONCRETE WORKProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - ll work upto plinth level: In cement mortar.1:4:8 |
| 4 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering and shuttering finishing and reinforcement -All work upto plinth level: :1.5:3 ( 1 Cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 5 | Centering shuttering including struttings, propping etc. and removal of form work for(i)Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 6 | (ii) Walls (any thickness) including attached pilasters,buttresses, plinth and string courses etc. using shuttering ply |
| 7 | Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(i) Thermo-Mechanically Treated bars of grade Fe 500 D or more |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 9 | 6 mm cement plaster of mix (I) 1 : 4 ( 1 cement : 4 fine sand ) |
| 10 | Neat cement punning. |
| 11 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63mm thick with zinc coating not less than 275gm/m2 |
| 12 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s Specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. all complete as per direction of Engineer-in-charge. |
| 13 | Bar ScreensBar Screen Chamber (SS-304 Perforated Screen, Manual Lift) Supply, installation and commissioning of bar screen chamber 1.0 m × 1.0 m with 4 mm thick SS-304 perforated screen, supporting frame, manual lifting arrangement, debris basket, gaskets, fasteners, civil embedding, painting, and complete accessories as per specification and direction of Engineer-in-Charge, including testing and commissioning(All complete with daily manual cleaning & disposal procedure provision.) |
| 14 | Lifting PumpSupply, Installation and Commissioning Submersible, non- clog 1 HP lifting pump to pump water from collection tank to Aeration tank. Make: Kirlosker / Texmo or equivalent. |
| 15 | Sludge PumpSupply, Installation and Commissioning of non clog 1HP sludge pump to remove sludge from setling tank to Sludge Drying Bed, Make: Kirlosker or equivalent. |
| 16 | Filter Feed PumpSupply, Installation and Commissioning of 1HP Centrifugal Pump from disinfection tank to activated carbon filter, Make: Kirlosker or equivalent. |
| 17 | Turbine Blower/ Root BlowerSupply, Installation and Commissioning twin lube root blower, with rotary compressor, Aircooled, Q-120cum/hr,DP-6000mmwc,3Ø, 1418RPM, V-Belt power transmission, Make: Beta, Everest, Airvac or equivalent. |
| 18 | Air DiffuserSupply, Installation and Commissioning of fine bubble type Air Diffuser with all internal fittings and accessories. Size: 63 mm Dia x 1000 mm long, Membrane :EPDM Air Flow: 6m3/hr - 8 m3/hr (Optimal – 6m3/hr to 8 m3/hr), Make: Proflex or equivalent |
| 19 | Tube SettlersSupply, Installation and Commissioning of Inclined Tube Settler , UV stabilizer Virgin PVC base with platform |
| 20 | MBBR Bio Pac MediaSupply, Installation and Commissioning of Bio Pac Media for adequate growth and development of Biofilm of Make: Tecpro or equivalent, MOC of Media: PVC. |
| 21 | Auto Dozer PumpAuto Dozer Pump of capacity 0 to 6liter per hour: Edose/ equivalent Dosing Pump of material HDPE, Single Phase 230V, Fuse:500mA. |
| 22 | Chemical Dosing TankProviding and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 23 | UV SterilizerSupply, Installation and Commissioning SS304 300 dia x 900mm long Electro Polished U.V. Radiator of capacity 1250LPH |
| 24 | Water Level ControllerSupply, Installation and Commissioning of Water Level Controller of Make Safeco or eqivalent. Power consumption 10Watt, input Voltage, Frequency 50/60 Hz, Capacity 0.5HP to 50HP |
| 25 | Inter Connecting Piping & ValvesProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.150 mm nominal inner dia .Pipes. |
| 26 | 100 mm nominal inner dia .Pipes. |
| 27 | 75 mm nominal inner dia .Pipes. |
| 28 | 25 mm nominal outer dia .Pipes. |
| 29 | Activated Carbon FilterSupply, Installation and Commissioning of UV protected FRP vertical Vessel with multiport valve for backwash and all internal media, frontal pipes and other accessories fittings, Make: Pentair, Tata Bio Life, Aquatech or equivalent. |
| 30 | Multi Grade FilterSupply, Installation and Commissioning of UV protected FRP vertical Vessel with multiport valve for backwash and all internal media, frontal pipes and other accessories fittings, Make: Pentair, Tata Bio Life, Aquatech or equivalent. |
| 31 | Treated Water TankSupply, Installation and Commissioning of Syntex or equivalent PVC tank of capacity 2000lts for storage of treated water for recycling. |
| 32 | Sludge Drying BedSupply, construction, installation and commissioning of sludge drying bed including earthwork, PCC levelling, brick side walls, underdrain system with PVC perforated pipes, graded filter media layers (gravel + pebbles + sand), drain outlet chamber, sludge inlet pipe arrangement and all fittings complete, as per standard design practice and direction of engineer in charge. |
| 33 | Starter Electronic Panel Supply, Installation and Commissioning of Starter 1HP for pump, cable to blower and pump all ISI standard, MCB 63AMP, all electrical fittings for ETP such as casing, covers etc. with star connection for each equipment. |
| 34 | Internal CablingSupply, Installation and Commissioning of Multi stand FLRS cable 4.0Sqmm/ 2.5Qsmm/ 1.5Sqmm communicable cable, Make: Finolex/ Havells/ Polycap or equivalent. |
| 35 | EarthingEarthing with Copper earth plate 600 mm x 600 mm x 3 mm thick i/c accessories and providing masonry enclosure with CI cover plate Size 12\\"x 12\\" having locking arrangement, along with 20 mm dia (medium gauge) watering pipe including CC work etc as required:- |
| 36 | Extra for using salt (12 kg) and charcoal (96kg) for plate earth electrode as required |
| 37 | Proving and fixing / Drawing 4.06 mm dia (8 SWG) Copper wire on surface or in existing G.I / PVC / Polythene pipe for loop earthing as required. |
| 38 | Copper Wire For EarthingSupplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 39 | Centrifuge MachineSupply,installation & commissioning of 12” Dia SS 304 Basket and MS Body detachable bucket and CI fly wheel and C.I. Stand with 1 HP TEFC STD MakeMotor Single Point Suspension Manual Top Discharge Please Enable Macros to View BoQ information |
