|
| 1 | Cost of drilling 200mm x 150mm x 250meter deep bore well in all kinds of soil and rock in rural or any other area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools drilling rig and Air Compressor and equipment, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete. |
| 2 | (i) From 0 - 50 meter |
| 3 | (ii) From 50 - 130 meter onwards |
| 4 | Supplying all tools, tackles & lowering of 200mm dia MS ERW/UPVC Casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. including all taxes, VAT, excise duty, freight charges with inspection charges etc. as applicable, all complete job. |
| 5 | Supplying all materials, labours, tools &equipments for fitting & fixing 200mm dia MS Cap over Casing pipe complete job. |
| 6 | Construction of Bore well Brick Masonry Protection Chamber ( Analysis Attached) |
| 7 | Supplying 100 mm dia submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pum[ shaft and ppolypropylene/noryl impeller, Motor suitabele for working on 415+10, 3 HP, 50 Hz , AC supply with cable guarrd, thrust carbon/fiber bearing to withstand entire hydraulic thrust water proof winding shall be provided. The pump set shalll be suitable for direct coupling pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shalll be provided with pump,3 meter submersible copper conductor cable in single/double run shall be provided with each pump.Submersibble pump set (Bronze Impeller) 150 mm dia 3 HP upto 20 stages |
| 8 | Supply rate should be increased as per increased staging more than 20 stages. |
| 9 | Supplying XLPE/PVC insulated, armoured cable 1100 V grade with ISI mark. 3 core 4.0 sq mm |
| 10 | Supplying for strengthing of XLPE/PVC insulated,armoured cable 1100 V grade with ISI mark etc all complete. |
| 11 | Supplying fully automatic star delta starter to operate 7.5/10 HP Submersibble pump etc all complete job. |
| 12 | Cost of GI pipe (Tata Mark or equivalent ) as per IS-1239(Part-01) 2004 ISIS marked/medium quality40 mm dia |
| 13 | Transportation Charge |
| 14 | GI Fittings |
| 15 | Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. |
| 16 | (For classification of soil item- B.) |
| 17 | (For classification of soil item- C.) |
| 18 | Supplying all labours, tools, tackles, lubricant etc. for laying and jointing D.I. K-9/ D.I. K-7 pipe in trenches, supplying rubber gasket (Rubber gasket conforming to ISS 9523) and making gasket joints including providing night guard, barrier and red light to safe guard against accident, all complete (pipe to be supplied departmentally free of cost) and laying of pipe is to be done as per ISS 3114:1985 as per design specification and direction of E/ I. |
| 19 | 100 mm DI Pipe |
| 20 | Supplying centrifugally cast(Spun) Ductile iron pressure pipes for Water supply with socket and Spigot ends conforming to IS 8329/2000 in standard lengths of class K-9/K-7 suitable for push on joint (Rubber gasket jointing) with cement morter lining for inside surface and outside Zinc coating with Bituminous paint including all other taxes, insurance, stacking including inspection charges of DGS&D/ SGS and sales tax all complete including carraiage up to 325 Km lead |
| 21 | 100 mm DI K-7- |
| 22 | Providing and supplying D.I. specials of class K-12, like branch, bends and tapers for water supply works suitable for push on jointing (Rubber gasket jointing) conforming to IS 9523 with cement morter lining for inside surface and outside Zinc coating with Bituminus Paint including all other taxes, insurance, carriage to work site with loading, unloading etc, stacking including inspection charges of DGS&D/ SGS and sales tax all complete. |
| 23 | Providing double flange sluice valve (size 50 mm to 1200 mm ) confirming for IS-2906/14846 including worn gear arrangements as per test presuure stainless steel spindle,caps, transportation etc all complete. With bypass arrangement -PN-1 |
| 24 | 100 mm dia . |
| 25 | Construction of Brick masonary valve chamber of size 1.50M X 1.20M X 1.50M as per enclosed annexure |
| 26 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge. |
| 27 | Making connection of DI pipe distribution branch with DI. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipes |
| 29 | Labour charge for one cutting of cast iron pipe and specials including necessary tools, plants chiping and filling the surface finish as per direction of E/I |
| 30 | Labour charge for testing of DI pipe and specials including necessary tools, plants chiping and filling the surface finish as per direction of E/I 100mm dia DI K-7 |
| 31 | Approach Road |
| 32 | Earth work in excavation in road embankment and shoulders with oridnary soil etc. all complete as per specification and direction of E/I. |
| 33 | Providing coarse clean sand in filling in foundation trenches or in plinthe including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials etc. all complete as per specification and direction of E/I. |
| 34 | Providing designation 75A one brick on edge soiling joints filled with local sand including cost of watering taxes, royalty all complete as per building specification and direction of E/I. |
| 35 | Providing PCC M150 with normal mix of (1:2:4) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing etc. all complete job s per building specification and direction of E/I. |
| 36 | Carriage of materials |
| 37 | GST-18% |
| 38 | Labour cess-1% Please Enable Macros to View BoQ information |
