|
| 1 | Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with coconut keeth coverings, providing ladder arrangements, country wood pland for working, inpection etc, complete hire charges only for erection, maintainance and removing the same on completion of the work 1 sq,ft. |
| 2 | Vimanam /Gopuram upto 25'-0\\" Height |
| 3 | Vimanam /Gopuram upto 15'-0\\" Height |
| 4 | Vimanam /Gopuram upto 50'-0\\" Height |
| 5 | Providing Water wash and appropriate methodology to restore the originalities of the existing Granite structures inclusive of necessary scaffolding charges, conveyance and all hire charegs for all tools and plants and clearing the site after completeion of work etc., complete. |
| 6 | Pointing the cut stone joints with Lime Mortor1:1.5 20 mm deep using red and yellow oxide and including cost of special tiles such brush and watering, curing etc complete, as per standard specifications. The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works. |
| 7 | Scraping the decayed lime plaster from the surface of Vimanams and Gopurams, carefully including isolated bricks or brickwork without demaging the vari vargams, racking out the joints, cleaning the surface with water, includinng all working in heights, hire charges for special tooks, brushes complete superficial area including all folds - 100sft. |
| 8 | Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortor1:1:5 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Lime Mortor1:1:5 and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram. |
| 9 | ( A) Kalkaram) |
| 10 | Clean removal of lime plaster from walls and racking out joint lime plaster from walls etc,. |
| 11 | Plastering with Lime Mortor1:1.5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works. |
| 12 | Dismantling, clearing away and carefully stacking materials useful for One course of pressed tile roof finish in Cement Mortar |
| 13 | Finishing the top of roof with one course of machine pressed tiles 23cmx 23cmx20mm of approved quality laid in ;LM 1:1.5,12mm thick mixed with water proofing compound 2% by weight of cement used etc, complete with standard specifications. |
| 14 | Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specifications. |
| 15 | Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.). |
| 16 | Clean Removal old paint from the surface of wooden door and painting old wood work with two coats of enamel paint of approved quality and colour over one coat etc. |
| 17 | Dismantling the existing lime concrete over the roofing with standard specifications. |
| 18 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) |
| 19 | Brick work in lime Mortor 1:2 using country brick of size 83/4\\"x41/4\\"x23/4\\" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification. |
| 20 | Madras terrace roofing with brick on edge 75mm concrete 3 courses of flat tiles 3 coats of lime plaster to top and bottom - 10 m2 |
| 21 | Supplying and fixing in position of Country wood frames, including cost and conveyance of all materials etc complete with standard specifications. |
| 22 | Roof Scantlings |
| 23 | Roof Planks |
| 24 | Scraping the old paint and Painting two coats of newly plastered Exterior/Interior walls with I class ready mixed plastic emulsion paint and of approved colour over a priming coat including thorough scrapping, clean removal of dirt and including necessary plaster of paris putty, wherever required etc., in all respects as directed by the departmental officers |
| 25 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 26 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 27 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 28 | Flooring with cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and lobour charges for paving and Pointing With Lime Mortor1:1.5 etc complete.( outer flooring) |
| 29 | Brick on edge Flooring over a bed of con -crete 100mm thick and pointed with LM 1:1.5 10 m2. |
| 30 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) |
| 31 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp |
| 32 | Supply and fixing of 7W / 9W LED bulb with battern Holder |
| 33 | Supply and fixing of 100W LED Fitting with Necessary clamp on Wall/ceiling with clamps with PVC unsheathed Copper leads from terminals to the fitting |
| 34 | Supply and fixing of single box type 4' 20W LED Fitting with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting |
| 35 | Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting . |
| 36 | Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed insuitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) . |
| 37 | Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End |
| 38 | Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW Box |
| 39 | Supply and fixing of 375 mm (15\\") sweep heavy duty AC exhaust fan complete without provision of hole in the wall |
| 40 | Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire with painting of suitable colour |
| 41 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. |
| 42 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour |
| 43 | Supply and run of 35mm x 20mm,1.6 mm Thick Solid type cable tray with cover of 1.2mm Thick, with Tee's,bends, Joint plate arrangements complete on Existing Angle iron work on pillar /wall |
| 44 | Supply and Laying of 2 X 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good |
| 45 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection |
| 46 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mmwith copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonrywork and with 38mm RCC cover slab for the brick masonry |
| 47 | Supply and providing of clamp sets using 2 nos of 25mmx6mm MS flate of length 31/2' and 2 nos of 12mm MS bolt and nuts and washer for the duct support on the pillers. The clamp set are painted with two coats of paints with the suitable colour |
| 48 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.Lower End |
| 49 | sub total |
| 50 | GST 18% Please Enable Macros to View BoQ information |
