|
| 1 | Top Pressure GI Channel (100X50X6) mm2.8 Mtr 2 Nos (9.2 Kg. / Mtr.) |
| 2 | AB Switch and HG Fuse Mounting GIChannel (75x40X6)mm 2.8 Mtr long 4Nos (6.8 Kg/ Mtr.) |
| 3 | 75x40x6 mm GI Channel 2.8 mtr long 2Nos Supporting Cross Bracing at bottom of DP |
| 4 | Angle for mounting LT distribution box(50X50X6) mm 1.5mtr long 2nos (4.5 Kg./Mtr.)with side angle |
| 5 | Fish Plate per cut point (0.428Kg ,6noseach ) |
| 6 | 11 KV Disc Insulator T & C Type 45 KNPOLYMER |
| 7 | l1 KV hard ware fitting T & C Type45KN |
| 8 | 11KV AB Switch 3 Pole(200A) |
| 9 | 11KV HG Fuse 3 Pole |
| 10 | 9KV 10KA Lightening Arrester |
| 11 | LT distribution box with MCCB,A1umunium Busbar including Kit Kat fuse,IS 8623,15 2950,IS 13947,IS 13118 |
| 12 | HT Stay set (Complete) |
| 13 | Stay Insulator |
| 14 | Stay Clamp |
| 15 | 7/10 GI stay wire |
| 16 | GI Pipe earthing 40mm dial mediumgauge 3mtr long |
| 17 | Earthing of support (coil type) |
| 18 | No-8 GI wire (Dia 4.6mm) 0.131 KG/Mtr. |
| 19 | 25X6 mm GI Flat (for earthing) |
| 20 | GI Bolts, Nuts & Washers of assorted size |
| 21 | GI Base plate (500x500x10)mm &20Kg/Pc |
| 22 | Danger Board |
| 23 | Back Clamp for danger Plate 25X3 mmflat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 no's = (2x0.59x0.510) |
| 24 | GI Barbed wire (Anti climbing device&3Kg/support) |
| 25 | Back Clamp for anticlimbing device 25X3mm flat, 0.59Kg/Mtr. Flat of 0.510mtrlength 4 no's = (4x0.59x0.510) |
| 26 | 55 mm2 AAAC conductor |
| 27 | LT 3 1/2core PVC cable 95mm2 |
| 28 | Sundries (Al binding tape, Insulation tape,clamp connector,jumpering materials ,socket and cable accessoriesetc.) |
| 29 | 8 mtr long 200 KG PSC pole(IS 1678-1998) |
| 30 | 3x50+1x35+1x16mm2 LT XLPE Aerialbunched Cable |
| 31 | Suspension clamp with I-Hook |
| 32 | Dead end clamp |
| 33 | Eye hook |
| 34 | Pole clamp for I-Hook |
| 35 | Anticlimbing Device(GI barbed wire 2kgper support) |
| 36 | 11 mtr long 150x150mm GI pole(30.6KgMtr.)IS 2062-1999 GI pole |
| 37 | 100x50x6 mm channel for straight Crossarm 1.2 mtr each 3no & 0.2 mtr long 1 No. for I Nos tapping Point |
| 38 | 11KV V-Cross arm (10.2KG) |
| 39 | G.I Back Clamp for V cross arm(0.85 KGeach) |
| 40 | I1KV F-Clamp(2.9KG ) |
| 41 | PG Clamp for 55mm2 conductor |
| 42 | 11KV Pin Insulator(POLYMER) |
| 43 | 11 KV Disc Insulator T & C Type 45 KN POLYMER |
| 44 | 11 KV hard ware fitting T & C Type45KN |
| 45 | GI Bolts, Nuts & Washers of assorted size |
| 46 | Earthing of support (coil type) |
| 47 | No-8 GI wire (Dia 4.6mm) 0.131 KG/Mtr. |
| 48 | GI Base plate (500x500x10)mm @20Kg/Pc |
| 49 | GI Barbed wire (Anti climbing device@3Kg/support) |
| 50 | Back Clamp for anticlimbing device 25X3min. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 no's = (4x0.59x0.510) |
| 51 | Danger Board |
| 52 | Back Clamp for danger Plate 25X3 mm flat, 0.59Kg/Mtr. Flat of 0.510mtr length 2 No's = (2x0.59x0.510) |
| 53 | HT stay set complete |
| 54 | Stay insulator |
| 55 | HT Stay Clamp(1.9 Kg/Pair) |
| 56 | 7/8 SWG G.I. Stay wire , Grade-2 |
| 57 | Sundries ( Binding wire,insulatingTap,Pole numbering etc) |
| 58 | 11 mtr long 150x150mm GI Pole(306Kg Mtr)IS 20621999 GI pole |
| 59 | 63 KVA,11/0.4KV(AL)Transformer BISEnergy Level-11 |
| 60 | Back Clamp for anticlimbing device 25X3min. flat, 0.59Kg/Mtr. Flat of 0.510mtr length 4 nos = (4x0.59x0.510) |
| 61 | Earthing of support (coil type) |
| 62 | No-8 GI wire (Dia 4.6mm) 0.131 KG/Mtr. |
| 63 | Danger Board |
| 64 | Back Clamp for danger Plate 25X3mm flat,length of 0.510mtr 1 no |
| 65 | RCCbasePlate |
| 66 | LT Stay Set complete |
| 67 | LT Stay Insulator |
| 68 | LT Stay clamp |
| 69 | 7/12 SWG G.I. Stay wire |
| 70 | GI Bolts, Nuts & Washers of assorted size |
| 71 | Sundaries |
| 72 | Cement concreting for stay anchor atewith C.C. 1:2:4, 0.2 Cum B 6177.92/- |
| 73 | Couping with C.C. 1:1.5:3, 0.1125 CumRs.6400.00 |
| 74 | Concreting of support C.C. 1:1.5:3, 0.375 Cum. A 6400/- for 11 Mtr. Joist Pole |
| 75 | Concreting of support C.C. 1:1.5:3, for 08Mtr. PSC Pole |
| 76 | Cost of the Plinth |
| 77 | Construction of brick wall boundry with MS gate |
| 78 | Materials for masonary work for earth pitcharcoal,salt etc for earthing |
| 79 | 35 mm2 3.5C LT PVC Cable |
| 80 | No. 8 SWG G.I Wire |
| 81 | 100 Amp Kit-Kat Fuse |
| 82 | G.I. Service Connection Bracket |
| 83 | Sundries |
| 84 | 35 mm2 3.5C LT PVC Cable |
| 85 | No. 8 SWG G.I Wire |
| 86 | 100 Amp Kit-Kat Fuse |
| 87 | G.I. Service Connection Bracket |
| 88 | Sundries Please Enable Macros to View BoQ information |