|
| 1 | Stone Aggregate(single size): 40 mm nominal size |
| 2 | Stone Aggregate(single size):20 mm nominal size |
| 3 | Coarse sand (zone III) |
| 4 | Portland Cement |
| 5 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 6 | Vibrator (Needle type 40 mm) |
| 7 | Sundries |
| 8 | Stone Aggregate(single size): 10 mm nominal size |
| 9 | wall form panel 1250x500 mm |
| 10 | Corner angle 45x45x5 mm 1.50 m long |
| 11 | 100 mm channel shoulder 2.5 m long |
| 12 | Double clip (bridge clip) |
| 13 | Single clip |
| 14 | M.S. Tube 40 mm dia |
| 15 | Structural steel such as tees, angles, channels and R.S. joists |
| 16 | Red oxide Zinc chromate primer |
| 17 | Adjustable span ESO+SI (2.35-3.40) |
| 18 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 19 | Solid blocks of size 30x20x20cm |
| 20 | Solid blocks of size 40x20x10cm |
| 21 | Fine sand (zone IV) |
| 22 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 23 | Plastic emulsion paint |
| 24 | Black Japan |
| 25 | Pink primer (for wood) |
| 26 | Synthetic enamel paint in black or chocolate shade |
| 27 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
| 28 | Vitrified floor tile 60x60 cm |
| 29 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 30 | Vitreous China orrisa type w.c. pan size 580 mm |
| 31 | White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings |
| 32 | Vitreous China flat back wash basin 630x450 mm |
| 33 | 15 mm C.P.brass tap |
| 34 | C.P. brass waste 32 mm |
| 35 | C.I. bracket for wash basin and sinks |
| 36 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 37 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 38 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame |
| 39 | Hard board 6 mm thick |
| 40 | Rawl plug 50 mm (designation 10 nos) |
| 41 | Chromium plated Brass screws 25 mm |
| 42 | Brass bib-cock-15 mm dia |
| 43 | Brass stop-cock 15 mm dia |
| 44 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 45 | PTMT - Soap Dish/Holder 138x102x75 mm |
| 46 | PVC pipe 25 mm outer dia . 12 kgf/cm2 |
| 47 | PVC pipe 50 mm outer dia.6kgf/cm2 |
| 48 | PVC door Elbow 63 mm dia |
| 49 | PVC vent cowl 63 mm dia |
| 50 | PVC bend 63 mm dia |
| 51 | PVC pipe 63 mm outer dia . 6kgf/cm2 |
| 52 | Brass 100 mm mortice latch and lock with 6 levers without pair of handles |
| 53 | Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock |
| 54 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
| 55 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 56 | Bright finished or black enameled mild steel screws 40 mm |
| 57 | Bright finished or black enameled mild steel screws 20 mm |
| 58 | Mild Steel round bar above 12 mm dia |
| 59 | Flats up to 10 mm in thickness |
| 60 | 200 mm Aluminium aldrop |
| 61 | Iron hooks & eyes 100 mm |
| 62 | Anjili wood scantls |
| 63 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 64 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 65 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 66 | Twisted steel/deformed bars |
| 67 | Mild steel tubes hot finished welded type |
| 68 | Welding by electric plant |
| 69 | Royalty for good earth |
| 70 | PVC pipe 20 mm outer dia 10 kfg/cm2 |
| 71 | Stone for masonry work |
| 72 | Stone Aggregate(single size): 06 mm nominal size |
| 73 | Interlocking C.C. paver block (60 mm thick, M-30) |
| 74 | Vitreous china flat back wash basin 550x400 mm Please Enable Macros to View BoQ information |
