|
| 1 | Electric Motor Driven:- Supply, installation, testing & commissioning of electric motor driven Horizontal Monobloc Pump capable to deliver 180 LPM @70 MWC |
| 2 | Fabricating & Supply, installing, testing and commissioning of compartmentalised Starter panel for Electrical motor driven pump. |
| 3 | Supplying, installing, testing and commissioning of C.I Sluice Valvea) 100 mm |
| 4 | Supplying, installing, testing and commissioning of C.I Stainer Ball type a) 100 mm |
| 5 | Supplying, installing, testing and commissioning of C.I Non-return valves as per suitable standard (PN 16) DUAL PLATE type a)100mm |
| 6 | Supplying, installing, testing and commissioning of Rubber Bellowsa) 100 mm - Suction Side |
| 7 | b) 100 mm - Delivery Side |
| 8 | Supplying, installing, testing and commissioning of GI ERW Pipes.a) 100 NB |
| 9 | b) 80 NB |
| 10 | c) 50 NB |
| 11 | d) 25 NB |
| 12 | Wrapping and coating anti-corrosive treatment for the following under ground MS pipe having one coat of anticorrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe |
| 13 | Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. |
| 14 | Supplying, installing, testing and commissioning of Ductile Body Butterfly valve a) 100 mm |
| 15 | b) 80 mm |
| 16 | c) 50 mm |
| 17 | Supplying, installing, testing and commissioning of brass Ball valves with fittings of screwed end typea) 25mm |
| 18 | b) 15mm |
| 19 | Supply and installation of Pressure gauges with isolation valve |
| 20 | Supply and installation of Pressure switches with isolation valve |
| 21 | Supplying and fixing approved make Pressure Relief Valve |
| 22 | Supplying and fixing approved make 25mm dia. automatic air release valve with 25mm ball valve & unions etc. complete. |
| 23 | Air Vessel Tank made of 200 NB Pipe along with suitable valves |
| 24 | Supplying, installing and commissioning of fire brigade inlet inlet connection of 2 way with 2 nos. 63 mm dia. built - in S.S Non- return valves instantaneous coupling type |
| 25 | Supply, installation Testing & commissioning of Single headed Stainless Steel Hydrant Landing valve |
| 26 | Supply, installation Testing & commissioning of Fire Hose 15 M long, 63mm dia Type 'A' RRL Hose with instantaneous Stainless Steel couplings and Hoses shall be stored inside the hose cabinet. |
| 27 | Supply, installation Testing & commissioning of Stainless Steel short branch pipe with Water Spray Nozzle. |
| 28 | Supply, installation Testing & commissioning of Integrated Fire Hydrant Box with Toughened Glass, Fabricated out of MS Sheet. |
| 29 | Supply, installation Testing & commissioning of testing and commissioning of Chrome finished Brass Ball Valves with fittings of screwed end type. |
| 30 | Supply and Installation testing and commissioning Hose Reel Drum of swinging type with 19mm dia Thermos PVC hose |
| 31 | Fittings such as Elbows, Tees, Reducers, Couplings, Nipples, Bolt Nuts and Gaskets etc., as required as per site conditions. |
| 32 | Supply, installation, testing and commissioning of Fire alarm Control Panel with PA System with inbuilt 100 watts AMPLIFIER |
| 33 | Supply, installation, testing and commissioning of Hooter, built in MS Housing, LMT, (100V DC) |
| 34 | Supply, installation, testing and commissioning of Talk Back U |
| 35 | Supply, installation, testing and commissioning of MS Manual call point with chain and hammer (24V DC) |
| 36 | Supply,Installation testing and commissioning of Optical Smoke Detector with base (Conventional Type) |
| 37 | Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc |
| 38 | HARDWARE FITTINGS FOR FIRE ALARM SYSTEM(Cabling, mounting, termination, protection, supports, accessories, and installation fittings) |
| 39 | Testing Commissioning and Project Management Charges Please Enable Macros to View BoQ information |
