|
| 1 | Dismentling Plaster and Refoase form side of work with 200 M (SOR -706) |
| 2 | 12 mm Thick Plaster 1:4 Coarse sand with all Complete Work.(SOR-584 +coarse sand Diff.) |
| 3 | Finishing walls with Premium Acrylic smooth exterior paint with silicone additives of required shade: new work two or more cleats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (apex, Ultima, weather coat all guard) asian ( 13.47.1) (DSR2023) |
| 4 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mmcentre to centre, one flange fixed to the ceiling withfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angl hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finis of tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 5 | Painting Or Varanishing on iron works in small areas or newwood work with one coat of ready mixed priming paint & Two coat of approved superior ready mixed paint of clear syuthetic varnish including supply of all materials, labour and T & P etc required for proper completion of the work. Paint to be used should confirm to the I.S.I No 103 1950 (S.I. No. 641+ 642) |
| 6 | Supply and fixing of flush doors commercial quality conforming to I.S. 2022 Part I (1983) Including fixing and adjustment of hings , bolts locks , handles , springs. Fitting with necessary screws to be supplied departmentally. S.I. No. 470 , © 40 mm thick |
| 7 | 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in charge . (Cost of aluminium snap beading shall be paid in basic item):21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 1176.80 21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) sqm 1505.25 21.3.3 With float glass panes of 8 mm thickness (weightnot less than 20 kg/sqm) sqm 1685.40 |
| 8 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required :(DSR 2023,17.3.1) |
| 9 | Providing and fixing 6 mm thick aprroved China White /Coloured glazed Tiles in Flooring or Dado Laid with 1:3 Cement & Aorroved Coursed Sand Mortar Finished And Jointed With White Cement Sallary . |
| 10 | Polyethylene water storage tank with cover and suitable locking arrangement Five Layer DSR-1649 |
| 11 | SF fixing wash basin with single hole/number of holes for piller tap with C.I or M.S. Brackets painted white including cutting holes and making good the same 550x400 mm LMR(DSR 17.7B |
| 12 | Supply and fixing of urinal with sensar completed in all respect as per direted E//I LMR(DSR 2023-17.6.4) |
| 13 | Povinding and fiking C.P. brass bib cock of approved quality conforming to IS:8931, 15mm nominal bore 1100N LMR |
| 14 | S/F of C.P.Piller cock Brass Rod 400 Gram approved company completed in all respect as direted LMR |
| 15 | Providing and fixing c.p brass stop cock (conceled) of standed desing and of approved make conforming to Is : 8931, 15mm nominal bore, LMR |
| 16 | S/f of Mirror completed in all respect as per direted EMR f PVC connection completed un all respect as per direted LMR(600x450)mm |
| 17 | S/f of PVC connection Pipe completed all respect as per direted LMR(600 mm)Long |
| 18 | 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 19 | s/f of 10 cm dia CP Brass Waste Jali completed in all respect as per direted LMR |
| 20 | S/f of Towel Rail completed. in all redpect as per direted LMR (S.N0 20)(820x20)mm |
| 21 | s/f of Soap Catenner completed in all respect as per direted LMR(DSR 17.71) |
| 22 | p/f toilet Paper holder 17.34 1 CP brass LMR |
| 23 | s/f of 110 mm dia PVC pipe 6.0 kg per cm sq ISI Mark completed in all respect as per direted LMR (SI no.730) |
| 24 | Fixing Panes of Glass with Aual or equivlent I.S.I. marked Quality putty Brades and spring complete.4.80to 5.70mm thick (S.I.812b) |
| 25 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3. kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily (dsr2023-11.41A1.1) Please Enable Macros to View BoQ information |
