|
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thick nessi) By Manual MeansA) In area of non-thorny jungle |
| 2 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting p g to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m (i) Private Land |
| 3 | Construction of subgrade and earthen shoulders with approved material obtainedfrom borrow pits with all lifts and leads, transporting to site, spreading, grading torequired slope and compacted to meet requirement of Table 300.2 with lead upto1000 m (i) Private Land |
| 4 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compaction with smooth wheel roller to achieve the desired density, complete ii) For Grading II Material |
| 5 | Wet Mix Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to Wet Mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mix material with tripper to site , laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density (including carriage upto initial lead of 5.0km from quarry and carriage of mixed materials upto 10.00km lead from mixing plant) |
| 6 | Prime Coat(Providing and applying primer coat with bituminous emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 1.00kg/sqm using mechanical means ) (Including cost of testing of materials at site and laboratory as directed by deptt.)B.(i) With Bitumen Emulsion -CSS-1h |
| 7 | Tack CoatProviding and applying tack coat with bitumen emulsion pressure distributor at the rate 0.20kg/sqmon the prepared bituminous/ granular base cleaned with mechanical broom. (Including cost of testing of materials at site and laboratory as directed by deptt.)(ii) With Bitumen Emulsion -CSS-1h |
| 8 | Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix and filler transporting the hot miox to work site,laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no. 507. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site and laboratory as directed by the deptt.)(I)With hydrated lime/ cement as filler (refer table 500-9 of MoSRT&H specification)(A) With 60/70 or VG-30 grade bitumen(ii) for Grading II (19 mm nominal size) |
| 9 | Bituminous Concrete: Providing and laying bituminous concrete with100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.509. complete in all respect. (including carriage of mixed materials up to 10.0 Km initial lead from mixing plant )( Including cost of testing of materials at site andlaboratory as directed by the deptt.)(I) With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification)(A) With 60/70 or VG-30 grade bitumen(ii) for Grading II (13 mm nominal size) |
| 10 | Boulder Apron Laid in wire crates Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each |
| 11 | Providing and laying pitching on slopes laid over prepared filter mediaI. Stone/boulder |
| 12 | Providing and laying filter material underneath pitching in slopes complete |
| 13 | Kilometer Stone (Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcii) Kilometer Stone |
| 14 | Kilometer Stone (Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etciii) Hectometer Stone |
| 15 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as perIRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MORT&H specifications |
| 16 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designedfoundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701ii)60 cm Equilateral Triangle |
| 17 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designedfoundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701iii)60 cm Circular |
| 18 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designedfoundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 1701vii)90 cm Octagon |
| 19 | Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below groundlevel i)1200x900 |
| 20 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level i)900x300 |
| 21 | Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance. |
| 22 | Solar studs of TATA BP providing sparkle solar stud Providing 'Sparkle solar road studs, manufactured by TATA B.P Solar India Ltd. Of size (125mmx125mm), 90mm ht. (from bottom to shank to the top stud) with detachable battery ,m6LEDsthree on each side of Bi-directional studs/3 LEDs of one side of unidirectional stud, ultra bright LED in amber and red colour , wt. per stud 700+25gm, flash rate of 50-65 times per minute completely water resistant and weather proof with replacemnet warranty and free maintenance for one yar from the date of installation of stud on raod (installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician)a) Bi-Directional stud- |
| 23 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designedfoundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground levelv. 600mm x 450mm rectangular |
| 24 | Metal Beam Crash Barrier, Type - A: \\"THRIE\\" Metal Beam Crash Barrier (Providing and erecting a \\"Thrie\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cmabove road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m center to center, 12 m high, 1.15m below ground level, all steel parts and fitments to be galvanized by hot dip process, all fitting to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150mmX75mmX5mm, 546mm long complete as per clause 810.) Please Enable Macros to View BoQ information |
