|
| 1 | PUMP HOUSEProvide all materials, labour, T&P Complete pump house of size(3.60x3.00x3.0)mChloronome of size (2.50 x 1.80 x 3.0)m as per type design. |
| 2 | Bye pass chamber |
| 3 | I class brick work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials labour, T& p etc. required for proper completion of the work (Extra Pl Ht)C/C Length Of P.H. - 23.44M. |
| 4 | supply and filling of earth in to plinth including all labour T&P & watering ramming dressing etccomplete. |
| 5 | OVER HEAD TANKSupply of all the materials, labour T&P and construction of a R.C.C. Over head tank above ground level with main components, based on IS-3370 or liquid storage concrete in over head tank and foundation concrete as per specification in I.S. 2911 including submission of structural design and drawing prepared by authorized strucural engineer and approved by the department including 3m extra height700 K.L. with 22 M staging(i)All Components of OHT will be casted in M-30 concrete with cement, coarse sand and approved stone grit as per I.S. 11682 and I.S. 456(ii)Minimum depth of founditation below original ground level will be 2.0 M.(iii)Seismic effects and wind load should be taken into consideration as I.S. 1893 for earthquake resistance and I.S. 875 part- III for wind load on structure. |
| 6 | Testing of bearing capacity of soil from a reorganized Govt. Engineering College or as directed by department. |
| 7 | Extra Inlet for Iind IIIrd TW |
| 8 | Supply of 200mm dia PVC pipe as per latest/relevant I.S. specification including all taxes and insurance etc.F.O.R. destination for disposal of water from overflow and washout chamber to suitable points outsides the water workscompound including excavation. |
| 9 | RISING MAINSupply of the following sizes ofD.I. pipes Class K-7 conforming to latest I.S. 8329/2000 complete in all respect F.O.R. destination including all taxes and insurance.Make Tata,Appolo or Jindal200mm dia K-7 |
| 10 | Supply of D.I. S/S or flanged Specials conforming to I.S. 8329/2000 Suitable for above C.I.S/S pipe F.O.R destination including all Taxes and insurance. |
| 11 | Supply of the following sizes ofD.I. Double flanged sluice valves as per I.S. 780/1969 class-1 working pressure 10kg/SqcmF.O.R Destination including all taxes and Insurance.200mm. dia. |
| 12 | Excavation for pipe line trenches in ordinary soil,(lime, clay or sand including lift up to 1.5m and lead up To 50m and refilling, watering, ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches.200mm dia K-7 |
| 13 | Carting from the store (up to 8 Km.) The following sizes of D.I. double pipe k-7 and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints.200mm dia K-7 |
| 14 | Carting of D/F Sluice valves of following sizes to the site of works lowering them into already prepared trenches and fixing them In position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but includingthe testing etc. complete.200mm. dia. |
| 15 | Supply of all materials, labour T&P etc. required and construct masonry type sluice valves chamber as per type design including supply and materialslabour, T&P etc. complete. |
| 16 | Supply of all materials, labour, T & P etc. required and construct thrust blocks at the bends. |
| 17 | DISTRIBUTION SYSTEMSupply of the following size and type of pipes with coupler and all jointing materials such as solvent cement rubber rings etc. including F.O.R. destination and all taxes, insurance and with loading unloading and stackingetc. complete D.I. Pipe - K-7350 MM Dia |
| 18 | 300 MM Dia |
| 19 | 250 MM Dia |
| 20 | H.D.P.E.Pipe P E-100200 mm dia |
| 21 | H.D.P.E.Pipe P E-100160 mm dia |
| 22 | 140 MM Dia |
| 23 | 110 MM Dia |
| 24 | 90 MM Dia |
| 25 | Supply of special for above pipes350 MM Dia MM Dia |
| 26 | 300 MM Dia |
| 27 | 250 MM Dia |
| 28 | Supply of special for above pipesHDPE pipe200 mm dia |
| 29 | 160 MM Dia |
| 30 | 140 MM Dia |
| 31 | 110 MM Dia |
| 32 | 90 MM Dia |
| 33 | Excavation for pipe line work in ordinary soil (loam, clay or sand) for pipe line trenches including lift up to 1.50m and lead up to 50m and refilling, watering ramming of excavated earth in to trenches and disposal of surplus earth up to 50mfrom centre |
| 34 | Carting of the following sizes pipes and special from department store to site of work. (within 8 km or within municipal limit) and lowering them in to trenches and laying true to alignment and gradient including testing of pipeline .D.I. Pipe - K-7350 mm Dia |
| 35 | 300 MM Dia |
| 36 | 250 MM Dia |
| 37 | H.D.P.E.Pipe P E-100200 mm dia |
| 38 | 160 MM Dia |
| 39 | 140 MM Dia |
| 40 | 110 MM Dia |
| 41 | 90 MM Dia |
| 42 | Supply of the following size of C.I.D./F sluice valves and scour values as per ISS class 1 working pressure 10kg/cm2 F.O.R. destination including all taxes and insurance.Sluice valves300 MM dia |
| 43 | 250 mm dia |
| 44 | 150 mm dia |
| 45 | 125 MM Dia |
| 46 | 100 MM Dia |
| 47 | 80 MM Dia |
| 48 | Sluice valves80 MM dia |
| 49 | Supply of 20 mm screwed down type air valve with gun metal seat F.O.R. destination including all taxes andinsurance.20 mm dia |
| 50 | supply of sluice valve type fire hydrant consisting of 80 mm dia sluice valve 80 mm dia tail pieces 80 mm dia duck foot bend and 63 mm dia standard making iron coupling with cap conforming to latest relevant I.S. specifications including all tax andinsur |
| 51 | Carting of C.I.D./F sluice valves and scour valve of following sizes to the sites of works lowering them into already prepared trenches and fixing them into position including supply of jointing materials such as bolts, nuts, rubber, insertion, white lead etccomplete.Sluice valves300 Mm dia |
| 52 | 250 mm dia |
| 53 | 150 MM Da |
| 54 | 125 MM Dia |
| 55 | 105 MM Dia |
| 56 | 80 MM Dia |
| 57 | Scour Valves 80 MM Dia |
| 58 | Carting from site store the 20mm dia screwed down air valves to the site of works lowering them into already prepared trenches and fixing them in position including boring and threading the main etc complete and including the cost of bailing out of |
| 59 | Carting of 80 mm dia flanged fire hydrant to the site of work lowering them into already prepared trenches and fixing them in position including boring and threading the main etc complete including cost of bailing out of water supply of jointing materials |
| 60 | Provide all materials labour T&P etc. required and construction single tap pillar type stand post as per departmental type design. |
| 61 | Supply of all materials labour T&P etc required and construct following chamber as per departmental typedesign masonry type.Sluice value chamber (masonry type) |
| 62 | Sluice value chamber (surface boxtype) |
| 63 | Fire Hydrant (Chamber) |
| 64 | Air Value Chamber |
| 65 | scour Value Chamber |
| 66 | Dismantling of following type of surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials up to a distance of 50m.Bituminous Road |
| 67 | Reinstatement of following type of surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto a distance of 50m.Bituminous Road |
| 68 | Provision for crossing of nalas , road, culvert and embankments(bundhs) etc. including shifting of telephone cables etc. along the alignement of Pipe line including supply of C.I.Tyton pipes and specials, and their laying and jointing testing etc. complete.Trenchless crossing 7.0 wide road |
| 69 | Making Commrcial Connection with 25mm (OD) MPDE pipe with (63mmto 160mm) distribution main. |
| 70 | Tubewell Construction TRANSPORTATION RIG MACHINETransportation of rig machine including Loading , unloading, Erection, Dismantling & labour etc complete in allrespect . |
| 71 | AIR COMPRESSORTransportation of 400 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in allrespect . |
| 72 | O.P. UNITTransportation of 2 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in allrespect . |
| 73 | CONSTRUCTION OF TUBE WELL (DRILLING)Drilling of BORE Logging of Bore |
| 74 | Drilling of 600mm dia bore from G.L. to100m BGL. |
| 75 | Drilling of 600mm dia bore from 100mBGL to 200m BGL. |
| 76 | LOWERING OF TUBE WELL ASSEMBLY AND SHROUDING OFT.W. BY GRAVEL-Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L.to 270m BGL.Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 100m BGL. |
| 77 | Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100mBGL to 200m BGL. |
| 78 | TUBE WELL: ASSEMBLY (As perIS 4270, IS 8110)300mm dia size MSERW housing pipe7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16mm thick, 1 no M.S. well cap 12mm thick , M.S. ring 12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect . |
| 79 | 200mm dia MSERW 7.1mm thick plain/slotted pipe including M.S ring 12mm thick , 1 no M.S. bail plug , center guide etc comp in all respect. |
| 80 | PEA-GRAVEL (As per IS 4097)1.60mm to 4.80mm size pea-gravel ofLalkuwan quarry duly screened, washed and proper stacking at site. |
| 81 | Development of tube well by 400 PSI air compressorDevelopment of tube well by 400 PSI aircompressor |
| 82 | Development of tube well by 1 cusecO.P. UnitDevelopment of tube well by 1 cusec O.P.Unit. |
| 83 | TEST Chemical and bacteriological test. |
| 84 | Power TransmissionPower Connection TW1PowerConnection From UpPCL For 25 Kw Load With 40 Kva Transformer |
| 85 | Godown Building & Offce 1001) Excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.50 m8 lead up to 50m, refilling watering and ramming of evcavated eartk into the trenckes or space betwwen tke building and sides of foundation trenches or into tke plinth and disposal of surplus eartk up to the distance of 50 mfrom the center of the foundation trenckes |
| 86 | 1011) Concrete witk 40 mm gauge brick ballast, local sand and cement in proportion in 8:4:1 in foundation including supply of all material, labour TSP etc, required for proper completion of |
| 87 | 1029) Ist. Class brick work in 1:6 cement and coarse sand in foundation and plintk including supply of all material, labour T8P etc. required for proper completion of work |
| 88 | 1054) 20 mm tkick D.P.C.witk cement and approved coarse sand 1:2 including 5% water proofing material or in proportion as specied by tke manufactures including supply of all material, labour T8P etc. required for proper completion of work. |
| 89 | 1029+1035+1036) Ist. Class brick work in 1:6 cement and coarse sand in super structure including supply of all material, labour T8P etc. required for proper completion of work |
| 90 | 1031+1035+1036+1037) Same as item 5(a) but kalf brick tkick wall |
| 91 | (1149) Supply and fixing of M.S. angle iron ekaukkats of 50 mm x50 mmx6 mm witk M.S. skeet door skutter including simple moulding straigktg work as in ckaukkats and also supply of all material, labour TSP etc. required for proper completion of work. Weigkt |
| 92 | Fixing of kold fast of doors and windows ckaukkats already moulded on ckaukkats in P.C.C. 1:2:4 etc. required in all respect to complete ike work. |
| 93 | (1025) R.C.C. work witk cement, coarse sand and 20 mm gauge approved stone ballast in proportion of 1:1.5:3 in sun sked and lintel on doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same witk 0.50 mm tkick binding wire and tke cost of binding wire and including necessary centering and skuttering supply of all material, labour T8P etc. required for proper completion of work |
| 94 | 1025) Same as item no. 1017 but in slab |
| 95 | 1151) M. S. or iron work in plain work suck as R.C.C.or R.B. work (when not included in over all rates) brought to required skape as necessary including bending for proper completion of the work including supply of steel and its wastage. |
| 96 | Supply and fixing of Z- Section section window frames and Shutters openable outside as per drawing and design approved by E/I, kinges of approved quality, M.S. or C.I. kandles, kold fast 4 nos of M.S. flat 25x5 mm and 150 mm long, pegs of M.S. 30 cm long kaving 4 koles witk pagester and brackets welded or riveted to frame complete including tke cost of Klass Panes 8 including supply of all material, labour T8P etc. required for proper completion of work. |
| 97 | 1190) 12 mm tkick plaster witk cement and local sand mortar 1:6 over brick work minimum tkickness not to be less tkan 10 mm including supply of all material, labour T8P etc. required for proper completion of work. |
| 98 | 1188& 1191) Same as item no 12 but in proportion 1:4 witk cement and local sand mortar over ceiling. |
| 99 | (1202) 25 mm tkick 1:2:4 plain cement concrete floor witk cement course sand and 20 mum gauge stone ballast laid in pannels finisked witk 3 mm floating coat of neat cement including 75 mm tkick base concrete consisting of cement local sand and Ist. Class brick ballast 40 mm gauge in proportion of 1:4:8 including supply of all material, labour TSP etc. required for proper completion of work. |
| 100 | (1161&1162) Same as item no 1161 but in Apron |
| 101 | Supply and fix 3 mm glass strips in position including supply of all material, labour T8P etc. required for proper completion of work |
| 102 | 1232 8 1233) Painting or varnisking new work or new wood work in small areas witk one priming coat and two coat of approved quality paint or varnisk including supply of all material, labour TSP etc. required for proper completion of work |
| 103 | 1253) Wkite wasking three coat including supply of all material, labour T8P etc. required |
| 104 | Finisking walls witk water proof cement paint of approved make and quality on new work witk two coats to give an even skade including supply of all material, labour TSP etc. required for proper completion of work |
| 105 | 1046) 11.5 mm string or drip coarse of Ist class brick in 1:6 cement and local sand mortar including plastering, cutting drip notck as required and including supply of all material, labour TSP etc. required for proper completion of work |
| 106 | 1004) Sand filling in plintk in including supply of all material, labour T8P etc. required for proper completion of work |
| 107 | 1167) Supply and lay 4 cm tkick insulation layer of sand and clay over R.C.C. roof including supply of all material, labour TSP, etc. required for proper completion of work. |
| 108 | Mud Faska on R. B. or R.C.C. roof with 100 mm tkick clay layer on roof and laying of tiles and jointing tkem with cement and sand mortar including supply of all material, labour T8P etc. complete |
| 109 | Supply and fixing of fan kooks box type including supply of all material, labour T8P etc. complete |
| 110 | Provision for internal electrification including supply of all material, labour, T8P etc. complete |
| 111 | Provision for water supply and sanitary works including supply of all material, labour, T8P etc. complete (10% of item 1 to 24 |
| 112 | Site clearance and otker unforeseen items |
| 113 | Ground Water Recharge Construction of ground water recharge mechanism |
| 114 | Three Months Maintenance |
| 115 | Staff quarterBuilding For StaffConstruction of a set of Staff Quarter for operators and chaukidars as per departmental type drawing & design. (Half Set) |
| 116 | 1stclass brick work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials labour, T& p etc. required for proper completion of the work (Extra Pl Ht)Qty Of S.Q. -42.3*0.35*1.50 |
| 117 | supply and filling of earth in to plinth including all labour T&P & watering ramming dressing etc complete |
| 118 | Cost of pumping PlantsPumping Plant For Tw1000 LPM, 57m head 1450rpm, 25 H.P. submersible clear water pumping plant suitable to operate on 415+%5 volt, 50 Hz. 3 phase A.C. supply (as per IS 8034-1989) Make KSB, Cromton or SchneiderSwitch gear with soft starter and L.T. cable as required |
| 119 | MAIN PIPING AND VALVES:SITC of 150mm dia size main piping and valves with 36mtr column pipe, Automatic chlorination system (SCADA compatable). power wiring, earthing, painting, tool set, wiring of pump house, chain pulley block and gauges complete in all respect with all required material. T& P labour. |
| 120 | SITC of 40 KVA voltage stabilizer. |
| 121 | BOUNDARY WALL, GATE SITE Provide all materials, labour T&P etc. required for proper completion of work and construct Boundary wall as per unit estimate |
| 122 | Ist class brick work in 1:6 cement and local sand mortar in foundation and plinth including supply of all materials labour, T& p etc. required for propercompletion of the work |
| 123 | Provide all materials, labour T&P etc. required for proper completion of work and construct pillars as per type design and fixing of gate 3.6 m wide gate and 1.2 m widewicket gate. |
| 124 | Provide all materials, labour T&P etc. required for proper completion of work and construct Interlocking approach road in water workscampous. |
| 125 | Provide all materials, labour T&P etc. required for proper completion of work including levelling, dressing excavation and filling of earth where necessary for develop of water works site includingcarriage of earth. |
| 126 | Provision for arboriculture for development of water workscompound. |
| 127 | Site clearance and other Please Enable Macros to View BoQ information |
