Name of Work:- Supply and assembly of LED sinage from Madan sweets to roaways bus stand.
Sl. No.
Item Description
1
Part-A Supply and installation, testing & commissioning of decorative lighting fixture (made out of metal / aluminium 2.0mm frame supporting a mix of diode based LED/Neon Pixel light, IP65 with al weather proof sealed driver box and LED strip UV resistant grade 4 and fire proof grade V-0 having voltage of 12v (low voltage) power rating of 7.2 watt/m capable delivering RGB colours using SPI Control method capable of working in the ambient temperature range of -10 degree to +50 degrees outdoor wire (size 0.6m x 1.00m) power supply 10amp * (2) Both side (left & right wing) illumination/glow complete in all respect as per the satisfaction of E/Ic. (The drawing design shall be as per the approval of competent authority) alongwith 3 year operational warranty.Neon make : Philips/Wipro/Osram/Hi-light/Red ElectroSupply make: Philips/Wipro/Osram/Hi-light/RedElectro Design : Butterfly/ Diya/Kalash/Namaste.
2
Supply and laying Aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of f750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamp etc. of suitable size or as directed by the Engineer Incharge complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per PWD schedule 2018 SI No. (1) 16mmx4core
3
Supply and fixing of 2.5sqmmx3core copper unarmoured cable.
4
Supply and burring of sale earthing electrode T-19Zn- Zinc coated, length up to 2000mm outer pipe 48.4 mm x 3.2mm, inner pipe 26.9 mm x 2.6 mm, terminal dia. 12mm, coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 Kgs. activated soil (BFC) capable of reducing the coil resistivity with good mixture of retaining capacity along with 30 cm squarare C.I. frame with hinged cover & masonary housing. (From electode terminal to switch board, cost of 25x3 G.I. stip will be extra). Make : as approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2017-18S.I. No. 725-B.
5
Supply and fixing of plain of pin type copper cable socket (Lug) S.No. 504.
6
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessedconduit/submain wiring/cable required
7
Supplying and laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II Complete with Fitting and cutting, Jointing etc. Direct in ground (At suitable depth below ground level) etc. Complete as required. 63 mm dia (OD-63 mm & ID-51mm nominal)
8
Providing and fixing 25 mm x 5mm G.I. Stril in 40 mm dia G.I. Pipe from earth electrode including connection with G.I. nut, bolt, spring washer excavation and refilling etc. as required.
9
S/Fand following Capacity of automatic Street Light cubicle control pannel painted with anticorrosive alkali and acid Proof paint consisting of time switch TSO 100 series with contractors, HR Fuse, metering instrument & instrument box with CTs etc in case of SPN, Complete in all respect 40 A SPN PWD SOR 2017-18 No. 807 (c) II
10
Part-B Operation of Part A first year (2.5% on Part A)
11
Operation of Part A second year (5% on Part A)
12
Operation of Part A third year (7% on Part A) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
