Tender For Construction Of Urban Hata Near Sriram Nagar Chowk At W.N-04 Under Bijepur Nac For The Year 2025-26
Tender Value
1.35 Crore
Estimated cost
Bid Submission
25 Mar 2026
0 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bijepur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Urban Hata Near Sriram Nagar Chowk At W.N-04 Under Bijepur Nac For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in all kinds of soil within initial lead & lift including levelling and dressing |
| 2 | Filling foundation and plinth with coarse sand well watered and rammed including cost,carriage & royality of the sand including cost of all labour & T&P required for the work etc. complete |
| 3 | Cement concrete (1:4:8) using 4 cm size hard granite crusher broken metal including cost of all materials & T&P required for the work etc. complete complete |
| 4 | R.C.C work of M-20 grade using 20mm and down graded hard granite crusher broken chips including hoisting and laying including centering and shuttering and dismantling them after casting. A) Column Base |
| 5 | b) Column |
| 6 | Plinth Band |
| 7 | Lintel Band |
| 8 | Chajja |
| 9 | Roof slab |
| 10 | Supplying, fitting, & placing in position HYSD bar reinforcement |
| 11 | Brick work with Fly ash bricks (25X12X8)cm. size in F&P in cement mortar (1:4) |
| 12 | Brick work with Fly ash bricks (25X12X8)cm. size in superstructure in cement mortar (1:6) |
| 13 | Supplying & fixing of Truss & 50 mm square pipe |
| 14 | Fixing G.C.I sheet (Dura shine coloured sheet) in roof drilling holes in wind ties including cost of fittings |
| 15 | Labour for fixing and fitting (Dura shine coloured sheet) ridges or valleys including cost of Ridges |
| 16 | 2.5 cm thick A.S flooring with cement concrete (1:2:4) using 12mm size hard granite crusher broken chips including punning |
| 17 | 12mm thick cement plaster (1:6) for brick work including cost of all labour & T&P required for the work etc. complete |
| 18 | 6mm thick cement plaster (1:4) to R.C.C surface finished smooth including closed deep chiping including cost of all materials and T&P required for the work etc. complete |
| 19 | Wall painting two coats with weather coat of approved shade over a coat of primer to give an even shade including cost of paint, all labour T&P required for the work etc. complete. |
| 20 | Painting two coats with approved paint on new wood/iron work over a coat of primer including cost of all materials, labours and T&P required for the work etc. complete. |
| 21 | Supplying & fixing of M.S Gate, Door and Window of approved design |
| 22 | 16mm thick cement plaster (1:6) for brick work including cost of all labour & T&P required for the work etc. complete |
| 23 | Cement concrete (1:3:6) with 4 cm size hard granite crusher broken metal including cost of all materials & T&P required for the work etc. complete complete |
| 24 | Supplying & fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by block machine with proper compaction laid in required pattern etc. complete in all respect |
| 25 | Cement concrete (1:2:4) with12mm size hard granite crusher broken chips including cost of all materials & T&P required for the work etc. complete. |
| 26 | Fixing Ceramic tiles in floors on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles |
| 27 | Fixing Ceramic tiles in dadoes skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles |
| 28 | Supplying, fitting and fixing of Vitrified industrial floor tiles of 22-25mm thick of Make Ultra, Eurocorner, Duracrete of size laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour, T&P etc required for the work all complete as per the direction of the Engineer in charge. |
| 29 | Distempering two coats to walls with distemper of approved shade to give an even shade including cost of all materials, labours and T&P required for the work etc. complete. |
| 30 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make & finished smooth & even surface to receive painting including cost of scafolding staging charges with cost of all materials taxes,labour,T&P etc. complete |
| 31 | Supplying and fixing of FRP shutter |
| 32 | Supplying all materials,labour and ladder/scafolding T&P for Art pting/3D painting over walls/streets/ (RCC or plastered or CC or Bituminuous base black top surface as per direction of Engineer in charge. |
| 33 | Supplying all materials, labour, T&P and fixing PVC Tanks including cutting holes through the tank and fitting extra sockets and jum nuts including hoisting up to a height of 5m. Above ground level and placing the tanks to required position all complete as per P.H specification and direction of the Engineer in charge (1000 litre capacity) |
| 34 | Supplying all materials, labour,T&P and cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking G.I/PVC Pipe and fittings all complete as per P.H specification and direction of the Engineer in charge (25cm thick) |
| 35 | Supplying all labour,T&P and fitting and fixing to wall , ceilling and floor G.I steel tube/PVC pipes of the following nominal bore tube fittings and clamps including making good the wall, ceilling and floor all complete as per specification in ground floor and direction of the Engineer in charge (25mm dia PVC Pipe) |
| 36 | Supplying all materials, labour, T&P and cutting grooves in pucca floor and walls for taking G.I/PVC Pipes making good the damage etc all complete as per P.H specification and direction of the Engineer in charge |
| 37 | Supplying all labour, T&P , laying, fitting and fixing U-PVC SWR soil wast/ventilating pipes and fitting of the following outside diameter for all classes including jointing withsupply of approved solvent cement by non heat application method including testing as per specification in ground floor and direction of Engineer in charge. a) 110mm OD PVC SWR Pipe single socket |
| 38 | b) 110mm OD PVC SWR Pipe Bend 87.50 degree |
| 39 | c) 110mm OD PVC SWR single Tee with door |
| 40 | d) 110mm OD PVC SWR coupler |
| 41 | e) 110mm OD PVC SWR Vent Cowl |
| 42 | f) 110mm OD PVC SWR clip |
| 43 | Supplying all labour, T&P and fitting and fixing of following P.H items as per P.H specification and direction of Engineer in charge. a) Porcelain 23\\" I.W.C (Orissa Pan+P Trap 125mmX110mm long |
| 44 | b) Standing Urinal for gents |
| 45 | c) Sqatting plate |
| 46 | d) Porcelain (550X400) WHB + C.I Basin bracket |
| 47 | e) 15mm dia C.P brass Short body bib cock + CP Flange + CP Extension piece (Latrine) |
| 48 | f) 15mm dia C.P long body cock + CP Flange + CP Extension piece |
| 49 | g)15mm dia CP Pillar cock long neck (Basin top) |
| 50 | h) soap dish/Oval |
| 51 | i)10 Ltr PVC low level cistern with fittings |
| 52 | j) Mirror best quality |
| 53 | k) 15mmX600mm PVC connection pipe |
| 54 | l) 15mm dia C.P Angular stop cock+ C.P extension piece |
| 55 | m) 15mm dia. Concealled Stop Cock (Shower bottom) |
| 56 | n) C.P waste (32mm small) |
| 57 | o) Waste pipe |
| 58 | p) Towel ring |
| 59 | q) Fixing Chromium plated brass shower with rose with 15mm or 20mm inlet |
| 60 | r) 25mm dia Brass full way valve |
| 61 | Earth work in excavation of foundation in all kinds of soil within initial lead & beyond 1.5mtr lift including levelling and dressing |
| 62 | Carriagr of surplus earth from work site to a safe distance by mechanical means |
| 63 | Supplying all labour , T&P & filling foundation and plinth with excavated materials including watering and ramming |
| 64 | Reinforced cement contrete (1:1.5:3) with12mm size hard granite crusher broken chips including cost of all materials & T&P required for the work etc. complete |
| 65 | Rigid and smooth centering and shuttering for concrete work including dismetalling them after casting.a) Buffallow wall |
| 66 | 20mm thick cement plaster (1:4) for stone work including cost of all materials and T&P required for the work etc. complete. |
| 67 | Cement punning to walls |
| 68 | Wall painting two coats with plastic Emulsion paint of approved shade including cost of all materials, labours and T&P required for the work etc. complete. |
| 69 | Fixing vitrified tiles in floors on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles |
| 70 | Supplying all materials labour, T&P and providing fitting & fixing (Aquaguaed) pure chill 120 PSS UV OF SIZE 750X570X1350mm height with water storage capacity 120 ltr along with 3nos of faucets 2 for cold water & 1 for normal water including a flow of 1.5ltr per minute etc al complete |
| 71 | Supplying all labour, T&P and drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). |
| 72 | Supplying all materials, labour, T&P and Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. |
| 73 | Supplying all labour, T&P and Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 74 | Supplying,Testing, Installation, Commissioning of 2.00 HP Submersible pump Motor set, single phase of reputed make(ISI Marked) including cost of pump set,conveyance of pump motor to shop to worksite, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge.(Without control panel) |
| 75 | Supplying all materials, labour T&P and fitting,fixing of control panel suitable for 2.00 HP Submersible pump motor for production well including cost of control panel, labour , T&P ,transportation, contractor profit & Labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 76 | Supplying all materials, labour, T&P and Lowering the 40mm OD(1\\") HDPE(PE-63) (8 kgf/cm²) pipes in borewell & laying in treches including cost of all materials, labour, T&P, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 77 | Supply & installation, testing , commissioning of 4.00 sq.mm PVC Insulatedf & PVC Sheathed Industrial Armoured Cable for submersible pump motor for Submersible motor (Reputed make) suitable for bore well including cost of all materials, labour, T&P, contractor profit & labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 78 | Supplying all materials, labour,T&P and providing ,fixing & fixing of following sizes W/S fittings including labour cess etc all complete as per the direction of Engineer-in-charge. a) 40 mm dia G.I. pipe (Heavy Duty) |
| 79 | b) 40 mm dia G.I. Socket (Heavy Duty) |
| 80 | c)40 mm dia G.I. ELBOW(Heavy Duty) |
| 81 | d) Pipe clamp for 40 mm dia pipe(Heavy Duty) |
| 82 | e) 200mm size Bore cape(Heavy Duty) |
| 83 | f) 40 mm dia Steel Nipple With Steel Nut & bolt(Heavy Duty) |
| 84 | g) 40 mm dia G.I. Union(Heavy Duty) |
| 85 | 2''×12 '' dia G.I. Short Peace(Heavy Duty) |
| 86 | Providing 8mm² wire rope for lowering with pump & motor including labour cess etc all complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Mar 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMar 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender