|
| 1 | Earth work excavation in foundation hard soil including moorum, stoney earth mixed with boulders with all leads and lifts including dressing and levelling the bed and depositing the excavated earth away from the work site with all leads and lifts including cost of all labour and T&P and cess required for the work and etc. complete in all respect and as per the direction by the Engineer-in-Charge. |
| 2 | Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 3 | Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge. |
| 4 | Providing cement concrete (1:3:6) in foundation and plinth using 4cm size clean hard black granite metal of approved quality from approved quarry including hoisting, lowering and laying in layers not exceeding 15cm thick to the required level, ramming watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-Charge |
| 5 | Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-Charge. (Ground Floor) |
| 6 | Reinforced cement concrete of M20 grade concrete with clean hard crusher broken granite chips of 20mm downgraded size of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, centring, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge. Column Base & Footing |
| 7 | Plinth beams |
| 8 | Column / Wall Beam (Super Strucure) |
| 9 | Lintels |
| 10 | Chajja |
| 11 | Roof Slab |
| 12 | Cutting, bending, binding and tying the grills and placing in proper position as per drawing and design including cost, conveyance and taxes of M.S rods and binding wire with all labour T&P and cess required for the work etc. complete in all respect in all floors (weight of binding wires will not be considered as measurement of M.S rods) as per specification and direction of the Engineer-in-Charge. |
| 13 | 1st class Fly ash brick masonry in cement mortar (1:6) in Foundation & Plinth using clamp burnt bricks of 9\\" size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 14 | 1st class Fly ash brick masonry in cement mortar (1:6) in super structure using clamp burnt bricks of 9\\" size having a crushing strength of not less than 75 kg./sq.cm including splays cutting, circular moulding, chamfering and cur belling, watering and curing etc. complete including cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 15 | 2.5cm thick grading concrete with C.C (1:2:2) using 6mm size hard black broken granite chips of approved quality from approved quarry including rounding the corners with required quantity of water proofing compound where necessary in ground floor and properly chipping and chiselling the floor slabs in 1st and subsequent floors including warding and curing cost and carriage of water and with cost, conveyance, royalty and taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 16 | 12mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P etc. complete in all respect as per specification and direction of the Engineer-in-charge.(Outside Surface) |
| 17 | 16mm th Cement plaster in C.M (1:6) to brick work finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-Charge.(Inside Surface) |
| 18 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. . |
| 19 | Dressed seasoned sal wood work framed & fixed (wrought & put up) in frames of doors, windows & ventilators etc complete as per direction of Engineer in Charge |
| 20 | Supplying, fiting and fixing of flush door shutter with approved quality of BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 21 | Supplying, fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures. |
| 22 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 23 | Supply fitting and fixing vetrified floor tiles in floor 600mmx600mm printed/coloured series trade on steps and landing on 25mm thick bed of cement motar (1:1) joint with net cement slury mixed with pigment to watched and shade of the tile including rubbing and policying etc complete as per directin of the Engineer in charge. (VC Room, Kitchen,Entrance etc) |
| 24 | Supply fitting and fixing Industrial Tiles in floor tiles in floor 600mmx600mm printed/coloured series trade on steps and landing on 25mm thick bed of cement motar (1:1) joint with net cement slury mixed with pigment to watched and shade of the tile including rubbing and policying etc complete as per directin of the Engineer in charge. (Ramp, Step etc.) |
| 25 | Supply fitting and fixing Ceramic Tiles in floor tiles in floor 600mmx600mm printed/coloured series trade on steps and landing on 25mm thick bed of cement motar (1:1) joint with net cement slury mixed with pigment to watched and shade of the tile including rubbing and policying etc complete as per directin of the Engineer in charge. |
| 26 | Supplying fitting & fixing of Vitrified tiles in dados, skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of tiles.tiles etc complete. (VC Room, Kitchen,Entrance etc) |
| 27 | Supplying fitting & fixing of Industrial tiles in dados, skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of tiles.tiles etc complete. (Ramp, Step etc.) |
| 28 | Supplying fitting & fixing of Ceramic tiles in dados, skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of tiles.tiles etc complete. |
| 29 | Providing fitting and fixing of Gypsum board (12.5mm thick of size 6'x4' size) celling with Aluminium anodised T section No. 3215 with 2'0\\"center to center, L Section No.1705 upto 15 micron on 4 walls to be fixed by means of steel screw and PVC supended from celling etc complete. |
| 30 | Providing fitting and fixing of Gypsum Ceiling Flower to be fixed by means of steel screw and PVC supended from celling etc complete. |
| 31 | Providing fitting and fixing of Gypsum Decorative Boarding to be fixed by means of steel screw and PVC supended from celling etc complete. |
| 32 | Distempering two coats with approved shade, over a coat of priming with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 33 | Finishing surface of walls with Acrylic Putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials taxes, labour T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 34 | Wall painting two coats with plastic emulsion paint of approved shade over a coat of priming on new work to give an even shade with approved shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 35 | Finishing walls with water proofing cement paint (Weather coat) of approved shade on new work two coats, over a coat of priming, to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 36 | Painting two coats over wood/steel surface with approved shade and quality to enamel paint over a coat of primer of approved quality in all floors and all heights including preparing the surface, watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. Please Enable Macros to View BoQ information |
