Tender For Development Of Parks In Division Iv-C Area.
Tender Value
16.40 Lakhs
Estimated cost
Bid Submission
23 Mar 2026
0 days left
EMD
32800
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Development Of Parks In Division Iv-C Area.
BOQ
| Sl. No. | Item Description |
| 1 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 2 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 3 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm Thick |
| 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 5 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 7 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 9 | Providing & Fixing of anti skid high strength, high finish, coloured Tile/Interlocking flooring having thickness 60 mm over prepared surface with base of 25 mm thick cement and mortar 1:4 as per approved colour, design & drawing including all respect complete. (the design of paving blocks shall be desided by Engineer-in-charge) |
| 10 | Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc.Good soil of earth |
| 11 | Spreading of manure , good earth in required thickness (cost of manure and good earth to be separately ) |
| 12 | yxs gq;s ikS/kksa dk la/kkj.k dk;Z &laosnd }kjk yxs gq;s ikS/kksa dh lkj laHkky@la/kkj.k dk;Z djuk gksxk] ikS/kksa dh vPNh o`f) gsrq laosnd }kjk le;≤ ij vko’;drkuqlkj vçoqM [kkn] fu;fer ikuh nsuk o dhVuk’kd dk ç;ksx ,oa fujkbZ&xqM+kbZ] Fkkaoys cukuk o ikS/kksa dks lh/kk j[kus ds fy, ckal dh [kIiph yxkuk vkfn dk;Z la/kkj.k esa 'kkfey gSA ftldk çcU/k laosnd }kjk vius Lrj ij djuk gksxkA yxkus ds 12 ekg i'pkr A |
| 13 | Providing and supplying of Garden bench (Victorian) at site both side of garden bench is made of cast iron having back height of 720 mm and seating height of 390 mm (approx.) it may vary at some places and both side of Garden bench is connected with 10 Nos. MS tube of rectangular section size 65×25×3mm having length of 1520 mm for seating purpose with extra support 25×5 mm MS flat for extra stability. All sharp and rough edges of bench is to be grinded with grinder and all fill up with m-seal, and fixed at required position and this bench is having the provision of hold & fast system weight not less than 95Kg (for grouting) bench is complete with a coat of 1st class red oxide and with three coats of synthetic enamel of 1st class quality paint in green colour finally bench is assembled with nuts and fixing at the site complete with the direction of E-I-C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Mar 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedMar 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMar 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender