|
| 1 | Civil Work |
| 2 | 5.1.1Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling , ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design,building specification & direction of E/I. |
| 3 | 5.1.2Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 4 | 5.1.10Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with all leads and 1.5M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume) |
| 5 | 5.3.1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :5.3.1.21:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | 5.2.3Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 7 | 5.3.11R.C.C. Work in beams, suspended floors, roofs having slope upto 15° landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircase and spiral stair cases above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand (zone - III ) : 3 graded stone aggregate 20 nominal size) |
| 8 | 5.3.17.20Centering and Shuttering including strutting, propping etc. And removal of form for Suspended floors, roofs, landings, balconies and acces platorm with water proof ply 12mm thick |
| 9 | 5.5.4Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 10 | 5.7.2Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | 5.7.11Providing 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I. |
| 12 | Approved basic rates of material item No. 29+ 10%C.P.Supplying of M.S.ANGLE OF 25X25X6 for support of Concertina wire including all carriage, taxes, all complete. |
| 13 | Carriage |
| 14 | Bricks(1k+21p)= 22 km |
| 15 | Coarse sand 16 KM |
| 16 | Stone Chips 32 km |
| 17 | Cement (8 km) |
| 18 | Steel (8 km) |
| 19 | Electrical Installation Work |
| 20 | M-874 Cable junction Box |
| 21 | 3.6Copper Earth plate electrode:-Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required.( with salt charcoal or coke) |
| 22 | 3.7S/L 8 SWG copper wire ground :-Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required. |
| 23 | 5.1Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required. |
| 24 | 5.2Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size exceeding 35 sq.mm.but not exceeding 95sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required. |
| 25 | 5.13Laying and fixing of one number PVC insuleted and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on wall surface as required.Up to35 sq.mm (clamped with 1 mm thick saddle) |
| 26 | Supply of PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:7098, part-1)g |
| 27 | M-335300 sq.mm. 3.5 core |
| 28 | M-32625 sq.mm. 3.5 core |
| 29 | M-333185 sq.mm. 3.5 core |
| 30 | M-32735 sq.mm. 3.5 core |
| 31 | M-32850 sq.mm. 3.5 core |
| 32 | M-32970 sq.mm. 3.5 core |
| 33 | M-878Supply of 20 Mtr. High Mast in one section Construction S355 grade as per BS-EN 10025 Top Dia 150 mm , botttom dia 410mm,plate thickness 3 mm, 20 side polygon, galvenisation as per BS-EN ISO 1461, base plate dia 520 mm,base plate thickness 25 mm, GIsingle spike lightning protection, maximium wind speed 47m/s as per IS:875 (part III)with 6 Nos foundetion bolts of PCD 490mm TS 600/30mm dia /850 mm long. Luminaires carrage : Material for 50 NB ERW Class B, MS Pipe, dia of carriage ring 535 mm (ID)with 6 Arms welded, 2 section having carrying capacity upto 12 luminaires,Trailing cable : 5 core 4 sq mm,PVC flexible copper conductor Winch/ power tool : Double drum, SWI 750 KG 1 HP 6 Pole single speed integral motor Rope : Grade AISI 316, 7/19 construction, dia 5 mm, BLC 2350 X 2 having 2 nos of continues rope. Aviation obstruction light : LED type as required. Feeder pillar : control panel housing 63 A TPN MCB incomer, single dial timer, 45 A contactor circuit for the autometic control of luminaires outgoing terminals and control circuit for power tool control with 2 nos 9A contactors and rise lower push button, incoming 35 sq mm and outgoing 16 & 2.5 sq mm terminals. IS : 1944 - 5 with Aviation light |
| 34 | M-883For 20 Mtr High Mast : ITC of the high mast and light fixture with the helo of suitable tools and plants. Wiring of luminaries with all wiring material like PVC insuleted PVC PVC sheathed flexible cable of suitable copper conductor, lugs,MCB and all labour & construction of shallow foundetion with M 25 grade concrete for the high mast considering safe soil bearing capacity of 10 T / Mtrs sq for 20 Mtr High Mast . |
| 35 | 12.37 DSR Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required |
| 36 | 12.38 DSR Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required |
| 37 | 12.39 DSR Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required |
| 38 | 7.1 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. |
| 39 | M-743Supply of 9 Mtr height Octagonal Hot Dip Galvenized pole (BOP - 9031) with top dia 70 mm, bottom dia 130 mm & made of 3 mm thick sheet base plate dimensions 200x200x16mm (L X B X T) including suitable sizes of foundetion bolt all complete as requried. (Without Arm) |
| 40 | M-876Instalation Testing & Commisioning of 9 Mtr Octagonal Pole & light fitting with the help of tools & plants, wiring of luminaires with all materials and construction of shallow foundetion with M 25 grade concreat considering safe soil bearing capacity of 10T/Mtrs sq |
| 41 | M-770Single Arm 1 Meter long |
| 42 | M-7561 Mtr Double Arm suitable for 70 mm TOP |
| 43 | 9.1SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY >_110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required. |
| 44 | 9.1.790 /100 W LED Street light of make bajaj/havells/crompton/C&S |
| 45 | 9.2S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover ,IP 66 protection ,LUMINIOUS EFFICARY >110 LM/W,with lens in existing pole/pipe for supply voltage 100-270V AC,50Hz Luminate shall be confirm to IS 10322 part 5/section 5 and shall be complete with all necessary accessories as required |
| 46 | 9.2.8240 W LED FLOOD LIGHT of make bajaj/havells/crompton/C&S |
| 47 | 9.1.20 DSR 3½ X 25 sq. mm (28mm) |
| 48 | 9.1.22 DSR 3½ X 50 sq. mm (35mm) |
| 49 | 9.1.23 DSR 3½ X 70 sq. mm (38mm) |
| 50 | 9.1.26 DSR 3½ X 150 sq. mm (50mm) |
| 51 | 9.1.30 DSR 3½ X 300 sq. mm (70mm) |
| 52 | Anaylised & ApprovedS.L.P(Street Light Panel) 100 A 35 KA FP MCCB - 1No 200A copper busbar and measuring instrument. Outgoing:- 63A MCB TPN-04 no,including all connecting material etc as required |
| 53 | Construction of Platform for fidder pillar of fix- 1500 mm x 2100 mm with excavation depth of 500 mm and 395 mm protected above OGL. Brickwork of 375 mm below OGL & 250 mm of 300 mm hieght above OGL. Top of platform to be finished with 75 mm PCC with all arround plaster and neat cement punning. All work to be completed as per drawing design and direction of EI. |
| 54 | Anaylised & ApprovedSupplying, designing, manufacturing, installation, testing and commissioning in correct alignment position, effecting proper connection of all incomer and outgoing of 250KVAR 14STEP A.P.F.C. Panel Double door(Capacitor Bank / Auto Mannual) of 16 SWG CRCA sheet (2 mm) steel IP – 43 floor mounting cubical type Double door Capacitor Bank Panel suitable for operation on 415V, 50Hz, 3 Ph. AC supply and fault level 36kA with front operated construction including separate fabrication arrangement for fixing 400 A 3 P0LE BC-36KA with O/L &S/C protection &Adjestable thermal magnetic release MCCB, , M.C.B., Capacitors, Contactors etc.The sheet steel under go minimum 7 tanks treatment followed by finishing powder coating of minimum 60 micron thickness duly compartmentalized with locking arrangement duly fixed on Base Channel with proper lifting arrangement size – 50 mm x 50 mm x 4 mm having accessories mounted inside the cubical panel, earthing with 2 Nos. earth studs and Capacitors having earthing arrangement.All openings shall be covered by soft rubber gasket, enclosure shall be galvanized. (15 x 2) x 1 Set = 30 KVAR (Power Capacitor) Ultra Heavy Duty. Make:- Legrand/ L&T / Schneider-Mehe (10 x 2) x 1 Set = 20 KVAR (Power Capacitor) Ultra Heavy Duty. Make:-Legrand/ L&T / Schneider -Meher (5 x 2) x 1 Set = 10 KVAR (Power Capacitor) Ultra Heavy Duty. Make:- Legrand/L&T/Schneider -Meher.(20 x 2) x 1 Set = 40 KVAR (25 x 6) x 1 Set = 150 KVAR (Power Capacitor) Ultra Heavy Duty Alongwith 2 Nos 3 pole MCB 10A 10KA,2 Nos 3 pole MCB 16A 10KA.2 Nos 3 pole MCB 25A 10KA.2 Nos 3 pole MCB 10A 10KA,2 Nos 3 pole MCB 40A 10KA, 6 Nos 3 pole MCB 63A 25KA 6 Nos 2 pole MCB 10ka C Curve, 1 No.1 pole MCB 10 KA C Curve, Make:-Legrand/ L&T / Schneider -Meher (Power Capacitor) Ultra Heavy Duty. Make:- Legrand/L&T/Schneider -Meher. TOTAL 175 KVAR |
| 55 | FEEDER PANEL (1) |
| 56 | Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel. |
| 57 | LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following: |
| 58 | (A) INCOMING |
| 59 | M - 321250A MCCB FP Adjustable thermal seting 35 KA |
| 60 | M -619300A TPN BUSBAR(COPPER) |
| 61 | (B) OUTGOING |
| 62 | M - 31825/100A 16 KA MCCB FP Adjustable thermal seting |
| 63 | 2.12.56/32 amps ,DP |
| 64 | 2.12.1063 amps. TPN MCB |
| 65 | (C)OTHER ACCESSOSRIES |
| 66 | M- 873 A DIGITAL VOLT METER 500V(3phase class 0.5) |
| 67 | M- 873 BDIGITAL A METER 500V(3phase class 0.5) |
| 68 | M- 445COPPER WIRE 1.5MM |
| 69 | M- 448COPPER WIRE 6MM |
| 70 | M- 449COPPER WIRE 10MM |
| 71 | M- 450COPPER WIRE 16MM |
| 72 | M- 451COPPER WIRE 25MM |
| 73 | M- 1455LED INDICATOR LAMP R/Y/B/G |
| 74 | M- 1452C.T COIL OF CT ratio 500/5 IS2705 part -3 |
| 75 | Analysed itemS/F WEATHERPROOF CANOPY TYPE double door with rubber gasket Floor mounted cubical panel board , fabricated with 16 gauge iron sheet with Iron angle frame padestal etc suitable for panel mounted switch disconnector, Space for busbar,insulator,switchgears and painting etc.as required .AS PER E/I (but without busbar copper strip /Switchgears/MCB's/MCCBsWire and other accessosries) The rate of this itom is sum of A+B+C =Rs.81852.27@ 50% That is Rs.40926.13 |
| 76 | FEEDER PANEL (2) |
| 77 | Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel. |
| 78 | LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following: |
| 79 | (A) INCOMING |
| 80 | M - 321250A MCCB FP Adjustable thermal seting 35 KA |
| 81 | M -620400A TPN BUSBAR(COPPER) |
| 82 | (B) OUTGOING |
| 83 | M - 31825/100A 16 KA MCCB FP Adjustable thermal seting |
| 84 | 2.12.640 amps ,DP |
| 85 | 2.12.1063 amps. TPN MCB |
| 86 | (C)OTHER ACCESSOSRIES |
| 87 | M- 873 A DIGITAL VOLT METER 500V(3phase class 0.5) |
| 88 | M- 873 BDIGITAL A METER 500V(3phase class 0.5) |
| 89 | M- 445COPPER WIRE 1.5MM |
| 90 | M- 448COPPER WIRE 6MM |
| 91 | M- 449COPPER WIRE 10MM |
| 92 | M- 450COPPER WIRE 16MM |
| 93 | M- 451COPPER WIRE 25MM |
| 94 | M- 1455LED INDICATOR LAMP R/Y/B/G |
| 95 | M- 1452C.T COIL OF CT ratio 500/5 IS2705 part -3 |
| 96 | Analysed itemS/F WEATHERPROOF CANOPY TYPE double door with rubber gasket Floor mounted cubical panel board , fabricated with 16 gauge iron sheet with Iron angle frame padestal etc suitable for panel mounted switch disconnector, Space for busbar,insulator,switchgears and painting etc.as required .AS PER E/I (but without busbar copper strip /Switchgears/MCB's/MCCBsWire and other accessosries) The rate of this itom is sum of A+B+C =Rs.76638.48@ 50% That is Rs.38319.24 |
| 97 | FEEDER PANEL (3) |
| 98 | Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel. |
| 99 | LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following: |
| 100 | (A) INCOMING |
| 101 | M - 321250A MCCB FP Adjustable thermal seting 35 KA |
| 102 | M -620400A TPN BUSBAR(COPPER) |
| 103 | (B) OUTGOING |
| 104 | M - 31825/100A 16 KA MCCB FP Adjustable thermal seting |
| 105 | M - 319125A 16 KA MCCB FP Fixed thermal seting |
| 106 | 2.12.56/32 amps ,DP |
| 107 | (C)OTHER ACCESSOSRIES |
| 108 | M- 873 A DIGITAL VOLT METER 500V(3phase class 0.5) |
| 109 | M- 873 BDIGITAL A METER 500V(3phase class 0.5) |
| 110 | M- 445COPPER WIRE 1.5MM |
| 111 | M- 448COPPER WIRE 6MM |
| 112 | M- 449COPPER WIRE 10MM |
| 113 | M- 450COPPER WIRE 16MM |
| 114 | M- 451COPPER WIRE 25MM |
| 115 | M- 1455LED INDICATOR LAMP R/Y/B/G |
| 116 | M- 1452C.T COIL OF CT ratio 500/5 IS2705 part -3 |
| 117 | Analysed itemS/F WEATHERPROOF CANOPY TYPE double door with rubber gasket Floor mounted cubical panel board , fabricated with 16 gauge iron sheet with Iron angle frame padestal etc suitable for panel mounted switch disconnector, Space for busbar,insulator,switchgears and painting etc.as required .AS PER E/I (but without busbar copper strip /Switchgears/MCB's/MCCBsWire and other accessosries) The rate of this itom is sum of A+B+C =Rs.59011.15@ 50% That is Rs.29505.57 |
| 118 | FEEDER PANEL (4) |
| 119 | Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel. |
| 120 | LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following: |
| 121 | (A) INCOMING |
| 122 | M - 321250A MCCB FP Adjustable thermal seting 35 KA |
| 123 | M -620400A TPN BUSBAR(COPPER) |
| 124 | (B) OUTGOING |
| 125 | M - 31825/100A 16 KA MCCB FP Adjustable thermal seting |
| 126 | 2.12.640 amps ,DP |
| 127 | 2.12.1063 amps. TPN MCB |
| 128 | (C)OTHER ACCESSOSRIES |
| 129 | M- 873 A DIGITAL VOLT METER 500V(3phase class 0.5) |
| 130 | M- 873 BDIGITAL A METER 500V(3phase class 0.5) |
| 131 | M- 445COPPER WIRE 1.5MM |
| 132 | M- 448COPPER WIRE 6MM |
| 133 | M- 449COPPER WIRE 10MM |
| 134 | M- 450COPPER WIRE 16MM |
| 135 | M- 451COPPER WIRE 25MM |
| 136 | M- 1455LED INDICATOR LAMP R/Y/B/G |
| 137 | M- 1452C.T COIL OF CT ratio 500/5 IS2705 part -3 |
| 138 | Analysed itemS/F WEATHERPROOF CANOPY TYPE double door with rubber gasket Floor mounted cubical panel board , fabricated with 16 gauge iron sheet with Iron angle frame padestal etc suitable for panel mounted switch disconnector, Space for busbar,insulator,switchgears and painting etc.as required .AS PER E/I (but without busbar copper strip /Switchgears/MCB's/MCCBsWire and other accessosries) The rate of this itom is sum of A+B+C =Rs.93593.58@ 50% That is Rs.46796.79 |
| 139 | MAIN PANEL |
| 140 | Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's and space for Energy Metre etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel. |
| 141 | LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following: |
| 142 | (A) INCOMING |
| 143 | M - 597800A 35 KA MCCB FP Adjustable thermal seting |
| 144 | M - 321250A 35 KA MCCB FP Adjustable thermal seting |
| 145 | M - 319125A 35 KA MCCB FP Adjustable thermal seting |
| 146 | M - 589630A changover FP (ON-LOAD) Open excution type |
| 147 | M - 583125A changover FP (ON-LOAD) Open excution type |
| 148 | M - 586250A changover FP (ON-LOAD) Open excution type |
| 149 | M -618200A TPN BUSBAR(COPPER) |
| 150 | M -619300A TPN BUSBAR(COPPER) |
| 151 | M - 623800A TPN BUSBAR(COPPER) |
| 152 | (B) OUTGOING |
| 153 | M - 324500A MCCB FP Adjustable thermal seting 35 KA |
| 154 | M - 320150/160 A MCCB FP, 35 KA fixed thermal magnetic seting |
| 155 | M - 319125 amps, 16 KA fixed thermal seting 16 KA |
| 156 | M - 31825/100A 16 KA MCCB FP Adjustable thermal seting |
| 157 | 2.12.332 amps.SPN MCB |
| 158 | 2.12.1063 amps. TPN MCB |
| 159 | (C)OTHER ACCESSOSRIES |
| 160 | M- 873 A DIGITAL VOLT METER 500V(3phase class 0.5) |
| 161 | M- 873 BDIGITAL A METER 500V(3phase class 0.5) |
| 162 | M- 445COPPER WIRE 1.5MM |
| 163 | M- 448COPPER WIRE 6MM |
| 164 | M- 449COPPER WIRE 10MM |
| 165 | M- 450COPPER WIRE 16MM |
| 166 | M- 451COPPER WIRE 25MM |
| 167 | M- 1455LED INDICATOR LAMP R/Y/B/G |
| 168 | M- 1453C.T COIL OF CT ratio 800/5 IS2705 part -3 |
| 169 | Analysed itemS/F WEATHERPROOF CANOPY TYPE double door with rubber gasket Floor mounted cubical panel board , fabricated with 16 gauge iron sheet with Iron angle frame padestal etc suitable for panel mounted switch disconnector, Space for busbar,insulator,switchgears and painting etc.as required .AS PER E/I (but without busbar copper strip /Switchgears/MCB's/MCCBsWire and other accessosries) The rate of this itom is sum of A+B+C =Rs.431296.36@ 50% That is Rs. 215648.18 |
| 170 | Add 18% GST |
| 171 | Add 1% Lebour Cess Please Enable Macros to View BoQ information |
