|
| 1 | Earthwork in excavation in foundation Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth a obtained to a distance Up to 50M including all lifts with leveling remming the foundation trenches removing roots of trees shurbsall complete as per approved design, building specification and direction of E/I |
| 2 | Extra for earth work in hard soil as per specification and direction of E/I. (vide classification of soil item -A) |
| 3 | Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume). |
| 4 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:2:4 (1 Cement : 2 Coarse sand (zone -III) : 4 Graded stone aggregate 40 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached plasters, buttresses, plinth and string courses, fillets, column pillars, piers, abutments, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement :1.5 coarse sand (zone -iii):3 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, exluding the cost of centering, shuttering, finishing and reinforcement- all work up to plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand (zone-iii): 3 graded stone aggregate 20 mm nominal size). |
| 8 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarsesand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I(zone-iii): 3 graded stone aggregate 20 mm nominal size). |
| 9 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand ofF.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mmdepth curing, taxes and royalty all complete as per building specification and direction of E/I |
| 10 | Reinforceemnt cement concrete work in beams, suspended floors, roofs having slope up to 15º landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircase above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 |
| 11 | Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \\"p\\" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.580mm long with 10 litre low level P.V.C. cistern |
| 12 | Supplying, fining and fixing viterous white glazed earthen ware Indian squatting type 600x350mm urinal plate of Parry Hindustan or any other I.S.S approved make with internal flushing rim, 100mm white glazed earthen ware channel about 1 M long 5 liters capacity C.I. automatic flushing cistern of Reliance or any other approved make with fittings R.S. or C.I brackets 15mm and 45 cm long alkathene/P.V.C pipe, standard G.I. flush pipe for back and front with spreader fittings and brass coupling etc. 15 mm C.I body brass spindle stop cock of weight not less than 450 grams. all complete including painting of exposed parts with two coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as per specification and direction of E/I.450mm x 350mm Size (Small) |
| 13 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.25 mm dia. |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia. |
| 16 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (weight not less than 350 gms.) with extra socket all complete as per specification and direction of E/l. |
| 17 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/l.15mm dia Brass Stop Cock |
| 18 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. |
| 19 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Single tee with door - 110mm |
| 20 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5° - 110mm |
| 21 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) - 110mm |
| 22 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 23 | S/F M.S. grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction ofE/I. (Where materials is not supplied by the deptt.) |
| 24 | Supplying fitting and fixing 20 gauge G.C.I. Sheet (Door & Window) gate on M.S.angle frame of size 60*60*6mm, including cost of fabrication providing necessary locking arrangements worth haskel and domny duly fixed in C.C. (1:2:4) blocks of required size, |
| 25 | Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 26 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I. |
| 27 | Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 28 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leadsand lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 29 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per buildingspecification and direction of E/I. |
| 30 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.specification and direction of E/I. |
| 32 | providing Tor steel reinforcement of 8, 10 mm and 12 mmmm dia bar as per approved design and drawing excluding carraige of M.S.bars to work site , cutting, bending, and binding with annealed wire with cost of wire removal of rust placing the rod in position all complete as per building specification and direction of E/I.8mm dia |
| 33 | 10mm Dia |
| 34 | 12mm Dia and above |
| 35 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 36 | Providing two coat of oil bound distemper of approved shade and make over a primer coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as per building specification and direction of E/I. |
| 37 | Finishing wall with textured exterior paint of required shade New work ( Two or more coats applied @ 3.28ltr/10sqm) over and including primer coat of exterior primer applied @ 2.2./10sqm |
| 38 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fullycompacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete asper building specification and direction of E/I (Mode of measurement compacted volume) |
| 39 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 40 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm |
| 41 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface includingcleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease andsand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.building specification and direction of E/I |
| 42 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface includingcleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease andsand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.building specification and direction of E/I |
| 43 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as equired.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 44 | Cost Of Tranportation and Other miscellaneous charges for setting the rig machine at site all complete job as per didection of E/I. |
| 45 | HYDT: Cost of drilling 200mmx165mmx125mm deep bore well in all kind of soil and rock in ruralor any other area ……….do……….E/I. (A) from 0-50m (add C.P @10%=770.00+77.00=847.00) |
| 46 | (B) from 51m and above (add C.P @10%=804.00+80.40=884.40) |
| 47 | Supplying of 200mm dia x3.00m long UPVC casing Pipe confring to IS:12818:2016(CML No.554359)latest revision including Carriage(basic rate) (add CP @10% =1450.00+145.00=1595.00) |
| 48 | Supplying all tools ,equipments and labour and doing washing ,flushing and development of drill tube well to give clean and clear water…..do….E/I. (add CP @10% =3568.35+356.84=3925.19) |
| 49 | Providing and fixing MS,GI or CI cap for 200mm dia ……do……..E/I. (add CP @10% =220.00+22.00=242.00) |
| 50 | Supplying submersible pump (2HP)set confirming to IS: 8034and moter confirming to IS 9283……………do…………..E/I. (add CP @10% =18571.00+1857.10=20428.10) |
| 51 | Basic Rate of 32mm G.I pipe in 3m Length (medium with seamless Socket as per relevent BIS specification IS 1239(PART-1)/2004 (add CP @10% =300.00+30.00=330.00) |
| 52 | Commissioning of panel board suitable for the moter pump as per mentioned in the item including lamps, starter, main switch,fuses, inter connection in the pannel board including cost of wires etc. ……..do…….E/I. |
| 53 | supplying and commissioning of 5KVA servo stabillizer or approved equipment mark(rang 140V-280V)…….do……E/I. |
| 54 | Earting with Copper eart plate 600x600mmx3mm thick including accessories and providing masonry enclousre with coper plate………..do…..E/I. |
| 55 | supplying 32mm dia GI elbow confirming IS specification including cost of all Material labours, jointing material all comlpete job. |
| 56 | supplying and fixing G.I reducing tee plain 32mm dia |
| 57 | For 12 mtr. High Mast: I.T.C of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring material like PVC Insulated PVC Sheathed flexible cable of suitable copper conductor, lugs, MCB and all labour and construction of shallow foundation with M25 grade concrete for high mast considering safe soil bearing capacity of 10T/mtrs. sq. for 12 mtr. high mast. (Add: Basic Rate @ 68990 and CP+OH @ 14.95%) |
| 58 | Supply of 12 mtr. High mast in one section construction S355 grade as per BS-EN 10 025 top dia 100mm, bottom dia 360mm, plate thickness 3mm, 12 side polygon, galvanisation as per BS EN IOS 1461, base plate dia 520mm , base plate thickness 25mm, GI single Spike lighting protection, maximum wind speed 47 m/s as per IS: 875 (Part-III) with 6 Nos foundation bolts of PCD 445mm TS 600/24mm dia/ 850mm long. luminaries carriage : material for 40 NB ERW class B- M.S pipe, dia of carriage ring 450mm (ID) with 8 arm, welded, 2 sections having carrying capacity up to 8 luminaries. Trailing cable : 5 core 2.5 sq. mm PVC flexible copper conductor Winch/Power tool: Double drum , SWL 350kg with 0.75HP 6 pole single speed integral motor Rope: Grade AISI 304, 7/19 construction, dia 5mm , BLC 1450 x 2 having 2 Nos of continues rope. Aviation obstruction light: twin dome aviation obstruction ligth LED type as requied. (Add:basic rate @ 131000 and CP+OH @ 14.95%) |
| 59 | Outdoor Stand mounted feeder panel with 32 amp TPN, MCB incomer, 45 amp TP contactor automatic switching of luminaries power tools control incomer outgoing terminal etc. as reqd. (for high mast) (Add: basic rate @ 19500 and CP+OH @ 14.95%) |
| 60 | S.I.T.C of Following LED Flood lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50 Hz. Luminarie shall be confirm to IS:10322 part-5/section -2 and shall be be complete with all neccessary accessories as required. 240W LED Flood Light |
| 61 | Earthing with G.I. earth pipe 4.5 mtr long. 40mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 62 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc as required. |
| 63 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size not exceeding 35 sq. mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required |
| 64 | PVC/XLPE insulated PVC sheathed heavy duty, armoured electrical cable with aluminium conductor for working voltage up to and including 1100 volts. (Conformsto IS:1554,part-1) 10 sq. mm, 4 core. (Add: Basic rate @ 189 and CP+OH @ 14.95%) |
| 65 | Carriage of materials :- Bricks |
| 66 | Stone chips |
| 67 | Cement |
| 68 | Steel |
| 69 | ADD 18% GST |
| 70 | ADD 1% LABOUR CESS Please Enable Macros to View BoQ information |
