|
| 1 | Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.) By manual means in area of light jungle |
| 2 | Dismantling of Cement Concrete Pavement (Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) |
| 3 | Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000 metres.By Mechanaical Means using Hydraulic excavator |
| 4 | Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres) Lime /Cement ConcreteBy Mechanical meansPrestressed / Reinforced cement concrete grade M-20 & above |
| 5 | Construction of Embankment with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2). |
| 6 | Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2) |
| 7 | Granular Sub-Base with Graded Material ( Table:- 400- 1) By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)Grading-V Material |
| 8 | Wet Mix Macadam (Plant Mix Method) (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.) |
| 9 | Prime coat (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.) |
| 10 | Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom). |
| 11 | Tack Coat on Granular surfaces treated with primer (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom). |
| 12 | Dense Graded Bituminous Macadam Grading II with VG-30 Grade Packed Bitumen (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 505 complete in all respects.)For Grading II |
| 13 | Bituminous Concrete Grading II with VG-30 Grade Packed Bitumen (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects) |
| 14 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) |
| 15 | Solar Powered Road Markers (Road Stud) ( Supplying of solar raised pavement markers made of polycarbonated molded body with circular shape, solar powered, LED self illumination in active mode 360 degree illumination and reflective panels with micro prismatic Lensecapable of providing total internal Reflection 0f the light entering the lens face in passive mode. The markers shall support a load of 20000 kg tested in accoradance to ASTM D 4280 . The marker should be resistant to dust and water ingress according to IP 65 standards and should withstand temperatures in the range of 0 C to 70 C. Color of lighting could be provided in red or yellow ( amber ) as per requirement and typical frequency of blinking in 1 Hz. There should be current losses of less than 20 microamperes at 2.4 v in sleepcharging mode to enhance the life of the marker and a full charge should provide for a minimum autonomy of 50 hours.The height, width and length of the marker shall not be less than 10 mm x 100mm x 100mm. Also the surface diameter of the marker shall not be less than 100 mm respectively. The weight of the marker shall not exceed 0.5 Kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive and complete as directed by the engineer) |
| 16 | Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) |
| 17 | Direction and Place Identification signs with size upto 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign asper IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on two nos. of mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.) |
| 18 | Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign asper IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 sqm fixed over back support frame of min 40 x 40 x 5 mm Angle mounted on two nos. of mild steel circular pipe 65 NB, 3.2 mm thickness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.) |
| 19 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction of approved size , design and shape laid in required colour and pattern over bed as per relevant IRC code, filling the joints with fine sand etc. all complete as per the direction of Engineer -in - charge. |
| 20 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications.PCC Grade M20 Height upto 5musing Batching Plant, transit mixture and concrete pump. |
| 21 | Sand Filling in Foundation Trenches as per Drawing & Technical Specification |
| 22 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes , channels, plates etc including welding,grinding (@ 8 kg/sqm) |
| 23 | Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications.Random Rubble Masonry |
| 24 | Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical specifications |
| 25 | Extra for covering top of membrane with geotextile, 120 gsm non woven, 100 % polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane torch as per manufacturers recommendation. |
| 26 | Providing & making Gabion structure with mechanically Woven Double Twisted Hexagonal shaped wire mesh Gabion boxes as per IS 16014:2012, MORTH clause 2500, of required size, Mesh type 10x12 (D=100 mm with tolerance of + 2% ), Zinic+10% AI alloy +PVC coated, Mesh wire diameter 2.7/3.7 mm (ID/OD), mechanically edged / Selvedged with partitions at every 1 m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist , trying with lacing wire of diameter 2.2/3.2 mm (ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing , all complete as per direction of Engineer -in -charge. |
| 27 | Supplying & laying high strength flexible geogrids (HSFG) as soil reinforcement / basal reinforcement as per MORTH 3100 and IRC 113, made of high tenacity polyester core with polyethylene coating with Minimum Long Term Design Strength (LTDS) of more than 50 % of ultimate tensile strength at 30 degree celcius corresponding to 12 % strain.Ultimate tensile strength -300 KN/m. |
| 28 | Supplying & laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. Geocomposite for planar drainage, realized by thermobonding a drainage core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The drainage three dimensional core will have a \\"W\\" configuration as longitudinal parallel channels. Minimum thickness to be 7.2 mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75 mm characteristic opening size (O90) of 110 micron and tensile srength of 8.0 KN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 L/(m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 kN/m, with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work as per detailed specification all complete as per direction of Engineer -in -charge. |
| 29 | Supply of stones for gabion facia units. Stones for the Gabion facia shall be hard, angular to round, durable and of such quantity that they shall not disintegrate on exposure to water or weathering during the life of the structure. The stone size shall be range between 1.5 to 2.5 times mesh opening. Each range of sizes may allow for a variation of 5% oversize or 5% undersize, or both. The size of any oversize stone shall allow for the placement of minimum of three layers of stone must be achieved when filling the 1m high units and a minimum of two layers for the 0.50 m high units. The stone used for filling the gabion facia shall have a minimum density of 22 kN/m3 and Los Angeles abrasion value not more than 45. |
| 30 | Goods & Service Tax (G.S.T.) - |
| 31 | Labour Cess - Please Enable Macros to View BoQ information |
