|
| 1 | Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings.UADD SOR 20.1/254 |
| 2 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 200mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 200mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.6/255 |
| 3 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 4 | in all types of rocks. |
| 5 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 150mm nominal diameter casing pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 150mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.4/255 |
| 6 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 7 | in all types of rocks. |
| 8 | Drilling of perfectly vertical bore hole of 150mm diameter upto desired depth below ground level in all types of rock including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete20.5/255 |
| 9 | Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 1992 with IVth revision (Up-to-date amendments)150mm dia20.25/259 |
| 10 | I.S.I. marked UPVC casing pipe confirming to IS 4985/1988 (with up-to-date amendments)CM casing pipes 200mm dia20.26/259 |
| 11 | Providing and fixing of well cap on top of the tube well for protection200mm dia20.9/256 |
| 12 | Supplying & Installation of Energy efficiant five star BEE rating ISI Marked requiredcapacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4\\"/6\\" tube well with Control Panel Starter suitable for Submersible pump with dry run protection, connections, including submersible flat cable ISI marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. The size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope. Make - Kirloskar, falcon, Texmo, Luby & any ISI standard make)2 HP Head Mt. 163-58 Discharge LPM 10-45MPPHD SOR I Sep. 2023 11.2/164 |
| 13 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.2.5 Sq.mm multi strand11.5/165 |
| 14 | Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor11.6/165 |
| 15 | Labour only for lowering of single phase submersible pumping set of capacity 1 to 3 hp in the tube well with flexible/ rigid pipe line assembly, electrical cable, nylone rope, testing etc. Complete including connecting the electrical cable from pump & starter - \depth up to 150 mtr.26.21/330 |
| 16 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 8 KG/Sq.cm25 mm diaUADD SOR Vol-17.1/103 |
| 17 | Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm.32mm dia6.8/90 |
| 18 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work)32mm dia6.27/95 Please Enable Macros to View BoQ information |
