|
| 1 | Task Name : E-3.3 Material |
| 2 | 11 KV AB Switch Polymer type 400 Amp with Complete fitting |
| 3 | Fixing of A.B. Switch 11 KV ( Set of 3 No. ) complete with handle & pipe |
| 4 | 11 KV D.O. Fuse Unit Polymer type |
| 5 | Erection cost of 11 KV D.O. Fuse Unit Polymer type ( Set of 3 No. ) |
| 6 | 11 KV Strain hardware (T&C type) fittings |
| 7 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 8 | Fixing of Disc Insulator with H/ W 11 KV side |
| 9 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 10 | Erection cost of 9 KV Gapless type ( 5KA) Polymer for DTR ( Set of 3 No. ) |
| 11 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 12 | BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 200 KVA Distribution Transformer |
| 13 | Handling & Installation of Handling & Installation of Distribution Transformer (DTR) on DP, tightening with turn buckles on both sides, poles clamping and boting of base jumpering on HT side (Including hydra charges in urban area and chain pully charges in rural area) |
| 14 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 15 | Erection cost with transpotation charge for H-Beams 152 X 152 mm., 37.1 Kg./Meter 11 Meter. Long |
| 16 | XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts |
| 17 | XLPE Cable 1 core unarmoured 300 sqmm Aluminium conductor 1100 Volts |
| 18 | Aluminium paint |
| 19 | Erection cost of Aluminium paint |
| 20 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 21 | Erection cost of Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 22 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 23 | Bentonite compound powder |
| 24 | Bi-metallic clamps Distribution Transformers Bushing |
| 25 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 26 | Category: D3: Three Phase LT-CT operated Smart Meter- DT Meter with |
| 27 | Erection cost of Category: D3: Three Phase LT-CT operated Smart Meter- DT Meter with |
| 28 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 29 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 30 | Erection cost of Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 31 | Concreting of structures & foundation (1:3:6). |
| 32 | Erection cost of Concreting of structures & foundation (1:3:6) |
| 33 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 34 | Erection cost of D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 35 | D.O.Mounting Channel 75x40x6mm |
| 36 | Erection cost of D.O.Mounting Channel 75x40x6mm |
| 37 | Danger Boards Enamelled 11 KV |
| 38 | Erection cost of Danger Boards Enamelled 11 KV |
| 39 | G.I. STRIP 25X3 MM1 |
| 40 | G.I.Pipe 40 mm Dia C grade type |
| 41 | Erection cost of G.I.Pipe 40 mm Dia C grade type |
| 42 | Galvanized nut & bolt with washer |
| 43 | LT distribution box with 1.2 mm thick MS powder coated sheet, 315 A MCB on incoming & 6 no. 250 A HRC fuse base including 200 A HRC fuse , For 200 KVA Transformer |
| 44 | Erection cost of LT distribution box with 1.2 mm thick MS powder coated sheet, 315 A MCB on incoming & 6 no. 250 A HRC fuse base including 200 A HRC fuse , For 200 KVA Transformer |
| 45 | M.S.Nuts with Bolts |
| 46 | Red oxide paint |
| 47 | Erection cost of Red oxide paint |
| 48 | Stay set complete without Stay wire 16 mm. (Painted) |
| 49 | Erection cost of Stay set complete without Stay wire 16 mm. (Painted) |
| 50 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 51 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 52 | Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 53 | Transformer mounting Channel (100X50x6 mm.) |
| 54 | Erection cost of Transformer mounting Channel (100X50x6 mm.) |
| 55 | GST 18% |
| 56 | Task Name : F-1.1 Material |
| 57 | DTR S/s fencing (37 feet) of 6' with on MS Angle(50x50x6mm) 7No, 7'Height |
| 58 | Erection cost of DTR S/s fencing (37 feet) of 6' with on MS Angle(50x50x6mm) 7No, 7'Height |
| 59 | Double Gate (2No-2.5'x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 60 | Erection cost of Double Gate (2No-2.5'x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 61 | GST 18% |
| 62 | Task Name : C-1.1 Material |
| 63 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 64 | Erection Cost Of 11 KV Polymer Pin Insulator |
| 65 | 11 KV Strain hardware (T&C type) fittings |
| 66 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 67 | Fixing of Disc Insulator with H/ W 11 KV side |
| 68 | AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 69 | Erection cost of AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) |
| 70 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 71 | Erection cost with transpotation charge for H-Beams 152 X 152 mm., 37.1 Kg./Meter 11 Meter. Long |
| 72 | 11 KV Single pole cut point fitting 100x50x6 mm channel |
| 73 | Erection cost of 11 KV Single pole cut point fitting 100x50x6 mm channel |
| 74 | 11 KV Top clamp 65X65X6 mm. angle type |
| 75 | 11 KV V cross arm 65X65X6 mm. angle type |
| 76 | Fixing of 11 KV V-cross arm with Top Clamp |
| 77 | Aluminium Binding wire and tape |
| 78 | Aluminium paint |
| 79 | Erection cost of Aluminium paint |
| 80 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 81 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 82 | Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 83 | Erectionj cost of Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay |
| 84 | Concreting of structures & foundation (1:3:6). |
| 85 | Erection cost of Concreting of structures & foundation (1:3:6) |
| 86 | Danger Boards Enamelled 11 KV |
| 87 | Erection cost of Danger Boards Enamelled 11 KV |
| 88 | Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire |
| 89 | M.S.Nuts with Bolts |
| 90 | Red oxide paint |
| 91 | Erection cost of Red oxide paint |
| 92 | STAY GI WIRE 7/4.00 MM.(7/8 SWG) |
| 93 | Stay set 20 mm. complete without Stay wire (Painted) |
| 94 | Erection cost of STAY SET WITHOUT STAY WIRE 20 MM. (PAINTED) |
| 95 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 96 | GST 18% Please Enable Macros to View BoQ information |
