Tender For Renewal Work With General Repair Of Didarganj-Saraimeer Road (Odr) Km-7, 8, 9, 10(0.000-0.400), 10(0.850-1.000) And 11, Azamgarh-Uttar Pradesh
TDR : 54567643
Tender Notice
BOQ
4 Days Left
Azamgarh
Uttar Pradesh
Tender For Renewal Work With General Repair Of Didarganj-Saraimeer Road (Odr) Km-7, 8, 9, 10(0.000-0.400), 10(0.850-1.000) And 11
Name of Work:- Renewal work with general repair of Didarganj-Saraimeer Road (ODR) Km-7, 8, 9, 10(0.000-0.400), 10(0.850-1.000) and 11
Sl. No.
Item Description
1
Wet Mix Macadam (Plant Mix Method)Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (Excluding GST)
2
Tack CoatProviding and applying tack coat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per Technical Specification clause No. 503 (Excluding GST)
3
Bituminous Concrete (30 mm Thick)Providing and laying bituminous concrete with using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 (including Bitumen and Cost of HMP) complete in all respects (Excluding cost of GST)
4
Providing and laying of hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads@250 gms per sqm area thickness of 2.50 mm is exclusive of surface applied glass bed as per IRC 35 including cost of all materils, labour, machinaries, T&P etc. required for proper completion of work I/C all other charges and taxes. The finished surface to be level uniform and free from streks and holes as per MoRTH specification no. 803 (Excluding cost of GST)
5
P/L hot appiled thermoplastic compound 5 mm thick, 300 wide and 600 mm gape including reflectorising glass @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC: 35 the finished surface to be level, uniform and free from streak and holes (Transverse Bar/Repeated Bar) (Excluding cost of GST)
6
Construction of Embankment with Material obtained from Borrowpits (without Lead) Construction of embankment with approved materials obtained from borrowpits with all lifts and leads, transporting to site , speading grading to required slope and compating to meet requirement of table 300-2 (Excluding GST) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
