|
| 1 | Taking out carefully Ranigunge pattern tiles from roofstacking seviceable tiles at site and removing rubbish asdirected within a lead of 75m. |
| 2 | Dismantling R.C. floor, roof, beams etc. including cuttingrods and removing rubbish as directedwithin a lead of 75 m. including stacking of steel bars.In ground floor including roof. |
| 3 | Supplying ready mixed concrete of M 25 Grade with wellgraded stone chips of 20 mm nominal size, compacting and curing the same complete as per specification & direction of the Engineer-in-charge with all accessories vibrators etc. inclusive of all other incidental charges in this connection complete.(Without approved Concrete pump) |
| 4 | Supplying, fitting and fixing 18mm. to 22mm. thick kotastone slab in wall, dado in 15mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass/copper hooks including pointing in cement mortar (1:2) (1cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as perdirection of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. [Using cement slurry for bedding @ 4.4 kg/Sq.m and for jointing @1.8 kg/Sq.m] |
| 5 | Supplying & laying Double Wall Corrugated (with externalannular corrugation and smooth internal walls) High Density Polyethelene Pipes conforming to IS 16098 (Part-II):2013 having Stiffness Class of SN 8 with Ring Stiffness not less than 8.00 KN/Sqm. and Impact Resistance TIR value not more than 10% including necessary jointing materials for nonpressure underground Drainage, Sewerage & Cross drainage application.250mm internal dia. |
| 6 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:110 mm. Dia. |
| 7 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc withoutany backing course) laid after application slurry using 1.75Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removalof wax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.Deep Colour & White |
| 8 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respectincluding cost of all necessary fittings as required,jointingmaterials and two coats of painting with approved paint in any position above ground.20 mm Dia |
| 9 | Providing & fixing MS grating & fixed frame tobrick/concrete of angle 50mm x50 mm x 6 mm with 1 Nohold fast of size 25mm x6mm on each phase. The removable cover shall be made with outer frame of MS angle 50mm x 50 mm x 6 mm having weldedcross members on each direction with MS flats of size 50 mm x 8 mm at a spacing of 30 mm c/c. Including two coats of Synthetic enamel paint over a coat of primer complete as required.Size 600 mm x 400 mm |
| 10 | Add CGST @9% of total amount to Rs.8,08,983.47 |
| 11 | Add SGST @9% of total amount to Rs.8,08,983.47 |
| 12 | Add Construction Cess @1% of total amount to Rs.8,08,983.47 Please Enable Macros to View BoQ information |
