|
| 1 | Providing and fixing GI Coated Appolo make pressed steel doors,window frame manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jump lock jamb beed and if required angle threshold of mild steel angle of section 50X25 mm or base tiles of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt higes 2.5 mm thick with guards, lock strike plate and shock as specified and applying a coat of approved steel primer ater pretreament of the surface as directed by Engineer In charge .(Profile \\"B\\". |
| 2 | Providing and fixing GI Coated Appolo make pressed steel doors,window frame manufactured from commercial mild steel sheet of 1.6 mm thickness including hinges jump lock jamb beed and if required angle threshold of mild steel angle of section 50X25 mm or base tiles of 1.6 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt higes 2.5 mm thick with guards, lock strike plate and shock as specified and applying a coat of approved steel primer ater pretreament of the surface as directed by Engineer In charge .(Profile \\"C\\". |
| 3 | Providing and fixing ms grill of required pattern in presed steel frames of windows etc.with ms flat , square or round bars with round headed with welding complete in all respect. |
| 4 | steel work welded in built up section,trusses & frames work i/c cutting hoisting,fixing in position & applying a priming coat of red lead paint :- in grating,framed guard, bars,ladders,railng,bars,bracket & similar work. |
| 5 | Excavation in foundation trenches etc. in earth work in all kinds of soli lift upto all height Stacking the excavated soil not more than 3 mtrs. Clear from the edge of the excavation and then returning the stacked soil in 15cm layers,when required into plinth sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth with in all leads and lifts. (Pick work ) |
| 6 | P/L cement conc. work 1:4:8 (1 cement:4 sand :8 graded stone agg. 20 mm nominal size & curing complete e/c the cost of form work & reinforcement for rcc work infoundation and plinth . |
| 7 | P/L cement conc. work 1:4:8 (1 cement:4 sand :8 graded stone agg. 20 mm nominal size & curing complete e/c the cost of form work & reinforcement for rcc work infoundation and plinth . |
| 8 | Providing and fixing anodised aluminium ACP Sheet Back Lite heavy white sheet /work for door, window, ventilators and tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,rustfree, straight, mitred and jointed mechanically where ever required including cleat angle,aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws/ angle. All complete C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. (a) for door windows and ventilations , glazed and partions frames Chowked) |
| 9 | Providing and fixing anodised aluminium ACP Sheet Back Light heavy white sheet Glass /work for door, window, ventilators and tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners including necessary filling up of gaps at junctions, at top,bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,rustfree, straight, mitred and jointed mechanically where ever required including cleat angle,aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws/ angle. All complete C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. (b) for door windows and ventilations , glazed and partions Shutter) |
| 10 | Providing and fixing Ridge as per direction and to the entire staisfaction of Engineer in charge within all leads and lifts. |
| 11 | Providing and fixing celling as per direction and to the entire staisfaction of Engineer in charge within all leads and lifts. |
| 12 | Providing and fixing 0.60 mm thick pri painted steel sheet in roofing with hot dipped metallice zinc coated sheet with top coat of providing and fixing 0.60 mm thick pripainted steel sheet in roofing with hot dipped metallice zinc coated sheet with top coat of with all accessories has required as per direction of engineer in charge Please Enable Macros to View BoQ information |
