|
| 1 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (Prior approval of Superintending Engineer will be necessary) |
| 2 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth, murum watering, ramming etc. complete. (Lift upto 1.5 m) by Mechanical Means. |
| 3 | Providing and laying in situ/ Ready Mix cement concrete M-30 of trap/ granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. |
| 4 | Providing and laying cast in situ/ Ready Mix cement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant |
| 5 | Providing and laying Cast in situ/ Ready Mix cement concrete Mix-M30 of trap/ granite/quartzite/gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering. formwork, cover blocks, laying/ pumping. compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro Programmable Logic Controller with Superwisery processor based Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). |
| 6 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). (Excluding einforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin). |
| 7 | Providing and fixing in position Mild Steel FE-500, 32 milimetre diameter dowel bars precoated with anticorrosive epoxy paint 60 cm. long and at 30.00 cm. C/C & wherever directed including handling, straightening, necessary cutting supported by HYSD chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. |
| 8 | Providing and laying Cast in Mix cement concrete M-15 situ/Ready of trap/granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting. roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap/ granite/quartzite/gneiss metal for R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). |
| 10 | Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, liniels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 11 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 12 | Back filling behind abutment, wing wall and return wall by Granular Material as per drawings and technical specifications etc. complete. |
| 13 | Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600mm diameter in proper line, level and slope etc. complete. |
| 14 | Providing & constructing Brick Masonry Inspection Chamber 90 cm x 45 cm x 90 cm with frame fixed in cement concrete with R.C.C. cover medium duty 140 kilogram with frame etc. complete |
| 15 | Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, with 3 rows of 50 mm diameter G.I. pipe 30 cm apart and fixed in M.S. channels of section 125 x 65 x 6 mm spaced 2.5 m center to center 1:2:4 cement concrete bedding of size 45 x 30 cm as per detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. |
| 16 | Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 17 | Providing and fixing board displaying information, such as 'Name of work, Tender cost. Name of Contractor, Work completion and liability period etc.', having rectangular shape of 1.20 m. x 0.90 m. size made out 18 gauge (1.25 mm.) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages/ symbols etc. on M.S. angle of size 35 x 35 x 3 mm. frame with properly cross braced M.S. angles of size 35 mm. x 35 mm. x 3 mm. duly painted including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm. x 60 cm. x 75 cm. including, excavation, refilling, transportation and labour etc. complete. |
| 18 | Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete |
| 19 | Testing Charges |
| 20 | Labour Insurance |
| 21 | Royalty For Sand |
| 22 | Other Material (Murum, Rubble Soling) Please Enable Macros to View BoQ information |
