|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 min width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, for all lift, including getting out the excavated soil and disposalof surplus excavated soil as directed, within a lead of 50 m.All kinds of soil (DSR 2.8.1) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 manufactured sand derived from recycled concrete Aggregate (RCA): 10 graded stone aggregate 40 mm nominal size Recycled aggregate (RA) (DSR 4.1.10 A) |
| 3 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 40 mm nominalsize derived from natural sources) (DSR 4.1.4) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) |
| 5 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) (DSR 13.7.2) |
| 6 | Centering and shuttering including strutting, propping etc. and removalof form for Suspended floors, roofs, landings, balconies and accessplatform (DSR 5.9.3) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofshaving slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering, shuttering, finishing andreinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derivedfrom natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). (DSR 5.3) |
| 8 | Providing and fixing in position pre-cast R.C.C. manhole cover and frameof required shape and approved quality H D - 20Circular shape 560 mm internal diameter (DSR 19.19.3.1) |
| 9 | Providing and fixing of precast RCC M-20 HD Road gully cover and frames in 1:2 cement sand mortar on the top of brick masonary chamber complete in all respects to the entire satisfaction of EIC. (Size of ocver 690x537x80mm and frame is 810x657x130mm) . The work also includes removal/ dismantling of old frame and cover including minor repairs of the road gully if required. (NSI) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D ormore. (DSR 5.22.6) |
| 11 | Dismantling of paver nlock including base of cement concrete 1:5:10 and disposal of malba as directed by EIC and therefore refixing the interlocking paver block after scraping of mortar /concrete/rubbish etc. over 100mm thick base of coarse and conrete complete in all respect to the entire satisfaction of EIC (NSI). |
| 12 | Providing and laying 60 mm thick faciory made cement concreteinterlocking paver block of M -30 grade made by block making machinewith strong vibratory compaction, of approved size, design & shape, laidin required colour and pattern over and including 50 mm thick compactedbed of coarse sand, filling the joints with line sand etc. all complete as perthe direction of Engineer-in-charge. (DSR 16.68) |
| 13 | Filling available excavated earth (excluding rock) in trenches, plinth, sidesof foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m. (DSR 2.25) |
| 14 | Carriage of materials by mechanical transport including loading, unloading and stacking of earth upto 3 Km (DSR 1.1.2) |
| 15 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually controlled device(handle lever), conforming to IS : 7231, with all fittings and fixturescomplete, including cutting and making good the walls and floors whereverrequired : W.C. pan with ISI marked white solid plastic seat and lid (DSR 17.2.1) |
| 16 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillartaps, 32 mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mmwith single 15 mm C.P. brass pillar tap (DSR 17.7.4) |
| 17 | Extra over & above item no. 17.7.4 of DSR for using under counmter washbasin of size 550x445x190mm as per arctechcural drawing code c0494 of parryware (Nilagara) model with auto closing pillar cock system code G 2013 A1 of parryware (Lapis neo) with adjustable brackets (Special for under counter) to entire staisfaction of Engineer in charge . (NSI) |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.Semi rigid pipe 32 mm dia (DSR 17.28.1.1) |
| 19 | Providing and fixing PTMT bib cock 15 mm nominal bore. (NSI) |
| 20 | Less Against old material LS Please Enable Macros to View BoQ information |
