|
| 1 | ELECTRICAL Work |
| 2 | OD435101/2025-2026:Supply of 3 phase Horizontal Split casing Two stage type pump model DSM 80/36 , with CI casing Bronze impeller, SS Shaft, Mechanical seal coupled to Kirloskar make 30KW/40 HP, 1500RPM TEFC Sq Cage induction motor on a common base frame with couplingand coupling guard including free transportation and unloading charges. |
| 3 | OD435102/2025-2026:Disconnecting, Dismantling, removing and shifting to outside shed the existing old, rusted faulty pumpset including connecting old ,low IR value cable etc. and handed over to authorities |
| 4 | OD435913/2025-2026:lifting ,Laying in line and level fixing motor pumpset on base plate , levelling and correcting alignment to pump coupling ,Installation, testing and commissioning of 40hp Split Case squirrel cage induction Motor pumpset , trial run on full load using tripod chain block with required accessories,etc. after connecting existing 150 mm both suction & discharge GI pipe using flanges etc. checking vaccum motor line ,correcting to leakproof condition etc. |
| 5 | 90.6.6.6:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.16 sq mm |
| 6 | 90.12.24.5:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.16 sq mm |
| 7 | 90.16.1.5:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG) |
| 8 | 90.16.5.5:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG) |
| 9 | OD438073/2025-2026:Supply and Fixing 100A, HRC Fuse base with HRC Fuse link in the existing paneland giving connections etc. |
| 10 | OD438074/2025-2026:Supply and fixing the following accessories in the existing meter board and giving connections etc.(100A, 415 V 2 way neutral Link mounted on DMC/SMC base) |
| 11 | OD438075/2025-2026:Supply and providing 9L capacityGI fire bucket in post office RED with primer coat of red oxide and written with white paint FIRE mounted on MS angle frame work /wall bracket filled with fine sand painted the bracket/ floor stand including making good the damages colour washing etc. as required as per IS2546. |
| 12 | OD438076/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x6mm brass nut and bolt . |
| 13 | OD438077/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x3mm brass nut and bolt . |
| 14 | OD438078/2025-2026:Supply and installation of ABC Powder Type (Stored Pressure) Fire Extinguisher 4Kg. Capacity ISI Mark IS: 15683 consisting of M.S cylindrical body, squeeze leve,r discharge valve fitted with pressure indicating gauge, 30cm long, high pressure discharge hose, nozzle etc. with MAP Powder for 'A','B' & 'C' class fire, fixing on wall with wallhook etc as required. |
| 15 | OD438079/2025-2026:Supply and providing 18 W, LED, out door bulk head fittings on wall/ceiling and giving connections with required length of 16/0.20 mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire etc as required. ( LUKER eco LBKOVSL18 or equivalent make) Please Enable Macros to View BoQ information |
