|
| 1 | Provision and Installation of Specialized Surface Treatment, Sealing Systems and Supportive Structural Work at Oxygen Plant Area of Dr. R. N. Cooper Municipal General Hospital. |
| 2 | Rubber mat 2mm thick size 3x5 feet |
| 3 | 25 to 30 mm thk. Kota stone of size 0.430m x0.56m (17\\"x22\\") |
| 4 | Ruby red, jet black, Hasan green Granite for width upto 300 mm tiles/slab |
| 5 | Aluminum section used |
| 6 | Providing and fixing in position, Double leaf flush door of required size including providing & fixing T.W. frame 60mm x 150mm., 45mm thick solid code hard wood block board shutters with 25mm x 45mm lipping patti, allround the shutter & finished with 1mm thick approved textured laminates on either sides, finishing all exposed surfaces of wood with approved shade french polish, treating all the surfaces of wood in contact with masonary with tar paint (Black Japan),chrominum plated brass fittings & fastenings, S.S. handles etc. complete as per detailed drawing and as directed by the Engineer In charge. D2,D3,GL-D1,GL-D2,GL-D3 |
| 7 | SITC OF Hermetically Sealing type of Manual Sliding /Swing Door having thickness of 40-48mm of size 1500 X2100 mm single / dual leaf with PUF core sandwiched between Antimicrobial High Pressure laminates (HPL), with viewing window of size 300 X 300 mm. The door leafs hung on extruded heavy duty aluminium alloy extrusion Doorframe for single side swing Doors, Sliding Door leafs runs on (nylon wheels) within an extruded heavy duty aluminium alloy extrusion track / frames, for smooth effortless sliding with the help of handle. |
| 8 | VIEWING GLASS 5MM AT DOORS WITH BEADING |
| 9 | Providing and fixing in position Top/side hung window of extruded modular and anodised aluminum sections of approved make and of size 38.10 mm x 25.40 mm x 1.44 mm thk (wt. 0.471 kg/Rm) for outer rectangular tube, 40 mm x 31.5 mm x 1.5 mm (wt. 0.549 kg/Rm) for outer frame, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.502 kg/Rm) for central mullion, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.549 kg/Rm) for shutter and 16.50 mm x 14.50 mm x 1.20 mm thk (wt.0.157 kg/Rm) for glazing clip with 5 mm thick plain / frosted /tinted glass fixed in shutter including neoprene Gasket,fixtures,fastenings and accessories like hinges, locking arrangement etc. complete as directed by Engineer In Charge.(Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) |
| 10 | Constructing precast cement concrete solid block masonary (1:3) in valve chambers of any size and wall thickness, the concete block used shall be of 1:2:4 grade and of size 400x200x300,including racking of joints, curing etc complete and as directed by Engineer In Charge |
| 11 | Marine Ply service cupboard made from 20 mm. thick MarinePly. planks and 150 mm/200 mm. wide planks (panels) fixed on Marine Ply frame 25 x 40 mm. size (Marine Ply batten) and by using heavy duty hinges of stainless steel and locking arrangement for front doors danger board etc. Entire Marine Ply cupboard shall be dully varnished as per approved manner |
| 12 | Chequered plates |
| 13 | Supplying, fabricating and installing in position waling channel I.S 226 /2062 quality to sheet piles to correct line and level as per approved drawing and specification with required accessories such as plates, bolt & nuts etc.for connecting with sheet piles as well as for splicing the channels, welding the channel joints to achieve the properties of the section / welding of connecting plates etc including cost and conveyance of all materials, cost of drilling holes, hire charges of equipments, hire charges of crane, cost of electrodes, cost of fixing with bolts, nuts & washers, all labour, painting one coat of zinchromite primer after rubbing and cleaning the surface with mechanical wire brushing, sand paper,other incidentals etc complete.(Rate quoted shall includes supplying,fabricating, drilling holes and fixing waling channels to SSP only ,cost of accessories such as connecting plates, bolts & nuts etc ). |
| 14 | Repair of Rolling shutters GI Please Enable Macros to View BoQ information |
