|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level including curing, excluding the cost of centring, shuttering, and finishing. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) |
| 4 | centring and shuttring Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 5 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. Make Kajaria or equiv. |
| 6 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.Make Kajaria or equiv |
| 7 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore |
| 8 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work.15 mm diameter pipe. |
| 9 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 10 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay (non modular) bricks |
| 11 | Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : |
| 12 | Providing and fixing plain bend of required degree: Sand cast iron S and S as per IS:1729 |
| 13 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter 110 mm |
| 14 | Providing and fixing in position wall hung basin with full pedestal of make Jaquar or equivalent ( reference code LYS-WHT-38801) |
| 15 | Providing and fixing in position jaquar(573) or equivalent health faucet complete job. |
| 16 | Providing and fixing in position jaquar or equivalent towel ring shape of approved color and quality complete |
| 17 | Providing and fixing in position CP toilet paper holder jaquar (35753) or equivalent |
| 18 | Providing and fixing in position mirror of superior glass of approved design make jaquar or equivalent |
| 19 | Providing and fixing in position single lever basin mixer of approved design make jaquar or equivalent |
| 20 | Providing and fixing in position CP waste coupling of approved design make jaquar or equivalent |
| 21 | Providing and fixing in position CP bottle trap of approved design make jaquar or equivalent |
| 22 | Providing and fixing in position CP angle valve of approved design make jaquar or equivalent |
| 23 | Providing and fixing in position grab bar of approved design make jaquar or equivalent |
| 24 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: |
| 25 | Providing and fixing uplasticized PVC connection pipe with brass unions. 45 cm length |
| 26 | Providing and fixing in position soap dispenser with glass bottle of approved design make jaquar or equivalent |
| 27 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 28 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15). Make Fenesta or equiv. |
| 29 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener ofrequired dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Powder coated aluminum (minimum thickness of powder coated 50 microns) Make Fenesta or equiv. |
| 30 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 31 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) |
| 32 | Providing and fixing 3mm thick ACP Sheet in panelling fixed in aluminium doors, windows, shutters and partitions frames as per architectural drawings and directions of engineer in charge |
| 33 | Providing and fixing SS handle for Glass Door 2 piece set with chrome finish of approved brand. Complete job |
| 34 | Providing and fixing SS door lock piece set with Matt finish of approved brand. Complete job |
| 35 | Engaging labour for shifting of table and sofa from the room, cleaning post work and re shifting complete job |
| 36 | Providing and fixing Stainless Steel grating of approved design. Complete job |
| 37 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: |
| 38 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete : |
| 39 | Providing and fixing in position exaust fan including providing connection cable and socket all complete job |
| 40 | Providing and fixing in position geyser max 2 ltr capaity including providing connection cable and socket all complete job Please Enable Macros to View BoQ information |
