Tender For Renewal Work By Sdbc In Various Km Between Km 68 To Km 127 Of Uttarkashi Lambgaon Ghansali Tilwara Motor Road (Length 9.875 Km)., Ghansali-Uttarakhand
TDR : 54552751
Tender Notice
Corrigendum Details
BOQ
Expired
Ghansali
Uttarakhand
Corrigendum : Tender For Renewal Work By Sdbc In Various Km Between Km 68 To Km 127 Of Uttarkashi Lambgaon Ghansali Tilwara Motor Road (Length 9.875 Km).
Name of Work:- Renewal work by SDBC in various km between km 68 to Km 127 of Uttarkashi Lambgaon Ghansali Tilwara Motor Road (Length 9.875 Km).
Sl. No.
Item Description
1
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
2
Bituminous MacadamProviding and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504. (Bitumen VG-10 @ 3.3% of the weight of mix has been used for analysis purpose. The choice of bitumen will depend upon the prevailing site conditions and shall be in accordance with Clause 504 of MORD) with Bitumen VG-10
3
Providing and laying Semi Dense Bituminous Concrete with the use of batch type HMP producing an average output of 75 tonne sper hourusing crushed aggregates of specified grading,premixed with bituminous binder and filler, transporting thehotmix toworksite, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clauseNo. 508 complete in all respects Grading II - 10mm using VG - 10 bitumen (bituminous binder @ 5 % of mix)
4
Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
