|
| 1 | 2.31Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees andsaplings of girth up to 30 cm measured at a height of 1 m above ground level andremoval of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 2 | 50.2.33.6Cutting branches of trees overhanging above any structures of girth between 60cm to90cm including stacking of serviceable materials and disposal of unserviceablematerial, cost of labour, hire charges of rope and pully etc without making anydamages to nearby structures etc complete |
| 3 | 50.2.33.7Cutting branches of trees overhanging above any structures of girth between 90cm to120cm including stacking of serviceable materials and disposal of unserviceablematerial, cost of labour, hire charges of rope and pully etc without making anydamages to nearby structures etc complete. |
| 4 | 2.6.1Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 5 | OD360731/2025-2026Providing and fixing of pre-fabricated bottom fixture 75x75x2mm wall thickness and length of 0.85m ISI make GP or GI Square pipe including all fabrication cost and conveyance etc. |
| 6 | 4.1.3Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarsesand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mmnominal size derived from natural sources) |
| 7 | OD360780/2025-2026Supplying and fixing bottom fixture bush(adopter for 75mm pipe into 50mmpipe acting as a insulator to energize the raiser pipe, made from virgin PP or equivalent material and UV Stabilized, including all cost and conveyance etc. as per the recommendation of the engineer in charge |
| 8 | OD360815/2025-2026Providing and fixing 50*50*2mm ISI make GP or GI square pipe make of verticalraiser length of 4.25m and horizontal post guard of length 0.60m includinggalvanizing and fastener assembly and all cost of materials and labour charges etc. |
| 9 | OD360816/2025-2026Providing of factory fabricated T-angled intermediate posts suitable of makingelectrically live with bottom insulator fixtures and holes as required. |
| 10 | OD360817/2025-2026Providing and fixing warning made from signs poly-ethylene plastic with statutorycolour and signs on proper intervals of the fence as per directions of the engineer incharge |
| 11 | OD360818/2025-2026Supply and fixing of solar module stand with housing box made using powder coatedGI sheet to accommodate 1 no 100 AH battery, the energizer and solar chargecontroller. |
| 12 | Fencing - Electrical Work OD360837/2025-2026Supply and drawing of 12 SWG 2.5 mm high tensile wire as main line for hangingfence and fence lines made using galvanized iron metal 90 micron hot dip withminimum of 230-300 gms/sq.m Zinc coated thickness, break strength of 740 kg Zincpurity above 99% Average 22-23m/kg |
| 13 | OD360838/2025-2026Supply and installation of wire tightener for proper tensioning of wires made fromaluminum alloy nonrusting quality as per the directions of the engineer in charge |
| 14 | OD360839/2025-2026Supply and installation of solar panel of 150 Wp 12 Volt DC built with durableanodized aluminum frame for long-term reliability, lower internal resistance for better power transfer and reduced loss, capable to handle challenging weather conditionswith average 2400 Pa wind & 5400 Pa snow load, High-efficiency cells to deliverconsistent energy output and with minimum 2-years manufacturer warranty andminimum 10 years of performance warranty of approved brands |
| 15 | OD360868/2025-2026Supply and installation of tubular type, low maintenance type, C10 rated 12V DC100Ah battery with minimum of 2 years manufacturer warranty of makeExide/Amaron/UTL or techno commercial equivalent as per the site conditions and asper the directions of the engineer in charge |
| 16 | OD360857/2025-2026Supply of stainless steel wire rope 1.5mm and 304grade non rusting quality as thehanging lines, properly cut into average length of 3.6m each and fixed to the alreadyinstalled main line using the bullet connectors (made using copper material oraluminum or stainless steel material having an inner core hole size of 2.5mm dia )using crimping tools all as per the directions of the engineer in charge |
| 17 | OD360858/2025-2026Provding fence earthing using G.I. earth pipe or stainless rod 1.20 meter long, 8 mmdiameter including accessories as required and providing earth mixture compound toretain the mositure as and connecting the earth line to the installed earth rods are asper the directions of the engineer in charge |
| 18 | OD360859/2025-2026Supply and installation of lighting diverter assembly capable of diverting straylighting to ground and with adjustable spark gap as per the directions of the engineerin charge |
| 19 | OD360860/2025-2026Earthing with copper bonded GI earth plate 600 mm X 600 mm X 2 mm thickincluding accessories, and providing masonry enclosure with cover plate havinglocking arrangement and watering pipe of 2.7 metre long etc. with earth as required. |
| 20 | OD360861/2025-2026Supply, laying and providing connection from the energizer to the fence using leadout cable of GI single core capable of withstanding 15kV voltage as per directions of the engineer in charge |
| 21 | OD360862/2025-2026Supply of Digital volt meter capable of measuring of power rating up to 9.9 KV andproviding basic training to the department officials to verify the fence voltages atdifferent parts of the fence periodically |
| 22 | OD360863/2025-2026Supply of toolkit comprising of cutting pliers, twisting tool kit, multi meter anddouble ended providing spanner Please Enable Macros to View BoQ information |
