|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :, 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 7 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for :, Foundations, footings, bases of columns, etc. for mass concrete |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for :, Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts |
| 10 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required., In gratings , frames, guard bar , ladder, railings , brackets , gates and similar works |
| 11 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 12 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:, Of area beyond 3 sq. metres |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:, Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 14 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 15 | Fine dressing of the ground. |
| 16 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment). |
| 17 | Supplying and stacking of good earth at site including royalty and carriage upto 20 km lead and lifts (earth measured in stacks will be reduced by 20% for payment). |
| 18 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 19 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 20 | Supplying & Stacking of Selection No.1 doob grass turf at site fresh & free from weeds having proper roots in green including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. |
| 21 | Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately)., In rows 5 cm apart in both directions |
| 22 | 'Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E'/I. Sanction Rate |
| 23 | Laying interlocking tiles 80 mm |
| 24 | Providing and stacking of tabebiua healthy and multibranches of ht.10-12 feet in Earthen pots of size 12'' as per direction of the officer-in-charge. |
| 25 | Providing and stacking of Cassia fistula (Amaltash) healthy and multi branches of of height 10-12 feet in big poly bags of size 18'' as per direction of the officer-in-charge. |
| 26 | Providing and stacking of Delonix regia (Gulmohar) healthy and multi brances of height 12-14 feet in big poly bags of size 18\\" as per direction of the officer-in-charge. |
| 27 | Providing and stacking of Lagerstroemia flaush (Jarool) healthy & multi branches of height 10-12 feet in big poly bags of size 12\\" as per direction of the officer-in-charge. |
| 28 | Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 29 | Providing and stacking of Ficus panda of height 45-60 cm. with 6-7 branches and healthy foliage in p.bag of size 25 cm as per direction of the officer-in-charge. |
| 30 | Providing and stacking of Tabernaemontana coronaria (Chandni single) variegated of height 60-75 cm., 5-6 branches in p.bags of size 25 cm as per direction of the officer-in-charge. |
| 31 | Providing and stacking of Tabernaemontana coronaria (chandni variegated) of height 45-60 cm. with 3-4 branches earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 32 | Providing and stacking of Calliandra hybrida of height 75-90 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge. |
| 33 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 34 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Trees Plant |
| 35 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Shrubs Plant |
| 36 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water), Hedge Plant /Ground cover |
| 37 | Supply, Installation, laying & commissioning of 90 mm outer dia 6Kg/cm2 HDPE pipe. 33.01 (Jal Nigam Varanasi SOR) |
| 38 | Supply, Installation, laying & commissioning of 63 mm outer dia 6Kg/cm2 HDPE pipe. 33.01 (Jal Nigam Varanasi SOR) |
| 39 | Supply, Installation, laying & commissioning of HDPE Flange with tail piece, packing & nut bolt complete in all respect. Sanctioned rate |
| 40 | Supply, Installation, laying & commissioning Of reducer 90 mm to 63 mm outer dia 6Kg/cm2 HDPE pipe. |
| 41 | Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 90 mm HDPE pipe |
| 42 | Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 63 mm HDPE pipe. |
| 43 | Supply, Installation, laying & commissioning Of TEE JOINT 90 DEGREE FOR 90 mm HDPE pipe. |
| 44 | Supply, Installation, laying & commissioning Of TEE JOINT 90 DEGREE FOR 63 mm HDPE pipe. |
| 45 | Supply, Installation, laying & commissioning Of Opener for Hydrant 1.25x 12 inch. |
| 46 | Supply, Installation, laying & commissioning Of for 63 mm TAIL PIECES. |
| 47 | Supply, Installation, laying & commissioning of for 90 mm TAIL PIECES HDPE PIPES. |
| 48 | Supply, Installation, laying & commissioning Of PRESSURE Gauge 2.5\\" size (Gyceryne). |
| 49 | 3\\" disc filter. Sanctioned Rate |
| 50 | 2\\" disc filter. Sanctioned Rate |
| 51 | Thermos Temperature Controller wuth switch and socket .2 mm cable. |
| 52 | Butt velding electric heating plate. |
| 53 | 3\\" CI butterfly valve. |
| 54 | 2\\" CI butterfly valve. Market Rate |
| 55 | Supply, Installation, laying & commissioning of Service Saddle 3 inch x 1.25 inch. Sanctioned rate with bush |
| 56 | Supply, Installation, laying & commissioning of Swing Joint for 10 - 12 meter range 360 degree popup. |
| 57 | Supply, Installation, laying & commissioning of 25 mm outer dia 6Kg/cm2 CPVC pipe. |
| 58 | Supply, Installation, laying & commissioning Of Ball Valve for 25 mm pipes. |
| 59 | Supply, Installation & commissioning of pop sprinkler plastic make material with 10- 12 meter range 360 degrees. |
| 60 | Boaring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS : 2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer In charge, up to 150 meter depth below ground level. 300 mm dia All type of soil |
| 61 | Supply, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS: 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 200 mm nominal size dia |
| 62 | Supply, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 200 mm nominal size dia |
| 63 | Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm in the recharge pit, over the existing layer of boulders, in required thickness for all leads & lifts all complete as per direction of Engineer in charge |
| 64 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for bore well of: 200 mm dia |
| 65 | Providing & Fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS 2800 part - 1 including necessary bolts & nuts of required size complete. 200 mm clamp. |
| 66 | Supply and fixing of pump set & composite electric panel for submersible kirloskar/ sons/ crompton openwell pumpset greeves make three phases 380-440 v 50 cycles supply with fountain bolts and 3 core 2.5 mm flat PVC flexible copper conductor double insulated submersible cable and 4 core 1.5 mm form fountain pool to fountain electric panel etc fountain pool to fountain electric panel etc. complete with internal wiring lighting system.7.5 HP pump |
| 67 | Supply and fixing of pump set & composite electric panel for submersible kirloskar/ sons/ crompton openwell pumpset greeves make three phases 380-440 v 50 cycles supply with fountain bolts and 3 core 2.5 mm flat PVC flexible copper conductor double insulated submersible cable and 4 core 1.5 mm form fountain pool to fountain electric panel etc fountain pool to fountain electric panel etc. complete with internal wiring lighting system.Electric Panel Box |
| 68 | Supply and fixing of 2.5 sqmm 3 core PVC insulated PVC shethed flate submersible cable pump with bare bunched copper conductor for submersible pump motor with 1100 volt grade ISI marked all complete as per direction of Engineer in charge. |
| 69 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge., Play grounds / Public parks (1Mali for 2.00Acre). |
| 70 | Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge. |
| 71 | Supply & stacking Urea 40% Nitrogen @ 160 kg per acre (as per yard stick of CPWD LDA SOR 2018-19/11.1 ( @2512kg for 30 acres ) |
| 72 | Supply & stacking DAP 50 kg per acre/year. LDA SOR 2018-19/11.2 |
| 73 | 12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand) |
| 74 | Removing Paint or varnish with paint remover or caustic soda, including supply of all materials labour T&P etc. required completion of the work. |
| 75 | Finishing walls with water proof paint cement paints.(New work two or more coat applied @3.84KG/10 sqm). |
| 76 | M.S Iron work for R.C.C or R.B work. |
| 77 | Finishing walls with Acrylic Smooth exterior paint of required shade :, New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 78 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 79 | Construction of Granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 @3795.00 |
| 80 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 81 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 82 | Rough dressing the trenched ground including breaking clods. |
| 83 | Engagement of Sweeper chapter-02. Labour Rate, SI No. 51 (Rate Rs. 335.00+10%C.P.= 368.50) |
| 84 | Engagement of Plumber for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter. Rs. 420.00+10%CP |
| 85 | Supply & Stacking Bone Meal/ Oil Cake (LDA SOR Horti 2018-19/11.3) 50 kg per acre/Year |
| 86 | Engagement of Tractor trolley including POL for disposal of garbage (Kura) etc. from stacking place to disposable place including loading and unloading etc. all complete as per direction of E/I. P.S.R. |
| 87 | CHEST PRESS DIMENSIONS: PRODUCT AREA:3.6 FT X 2.8 FT SAFE PLAY AREA :7.6 FT X 6.8 FT FUNCTIONS: STRENGTHENS GLUTES, CHEST, SHOULDER. UPPER & MID ABS, FORE ARM & TRICEPS TECHNICAL SPECIFICATIONS: CENTER FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE MAIN FRAME: 40 NB & 32 NB GI B-CLASS PIPE JINDAL MAKE HANDLE FRAME: 32 NB & 25 NB GI B-CLASS PIPE-JINDAL MAKE CONNECTING PIPE: 32 NB & 25 NB & 40 NB GI B-CLASS PIPE- JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR BEARINGS: REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 |
| 88 | PROVIDING AND FIXING OF SHOULDER PRESS FUNPLAY FNF 005 HAVING DIMENSION: • PRODUCT AREA :3.6 FT X 2.3 FT • SAFE PLAY AREA :7.6 FT X 6.4 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS UPPER BACK, SHOULDER, BICEPS & CORE TECHNICAL SPECIFICATIONS: CENTRE PIPE : 100 NB GI C-CLASS PIPE- JINDAL MAKE SEAT FRAME : 32 NB GI B-CLASS PIPE- JINDAL MAKE MAIN FRAME : 40 NB GI B-CLASS PIPE- JINDAL MAKE HANDLE FRAME: 32NB & 25NB GI B-CLASS PIPE WITH TWO HANDLES SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN :SEAMLESS PIPE & ROUND BAR BEARINGS : REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. |
| 89 | PROVIDING AND FIXING OF FUN WALKER SINGLE FUNPLAY FNF 004 HAVING DIMENSION: • PRODUCT AREA :4.8 FT X 2.1FT • SAFE PLAY AREA :8.8FT X 6.1FT • AGE GROUP: 13 ABOVE YRS. FUNCTION: STRENGTHENS LEG MUSCLES, IMPROVES CARDIO VASCULAR ENDURANCE TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE LEG FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 25 NB GI B-CLASS PIPE –JINDAL MAKE FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE END CAP: GALVANISED CAP. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. NUT BOLTS: GALVANISED NUT BOLTS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. |
| 90 | PROVIDING AND FIXING OF FUN CYCLE FUNPLAY FNF 27 HAVING DIMENSION: • PRODUCT AREA : 3.2 FT X 2.2 FT • SAFE PLAY AREA :7.2 FT X 6.2 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHEN UPPER & LOWER LIMB, IMPROVES BODY CONSISTENCY & EGIBILITY, IMPROVE LUNGS & HEART EFFICIENCY AND STRENGTHENS HEART. TECHNICAL SPECIFICATIONS: MAIN FRAME : 25 NB & 40 NB GI B-CLASS PIPE -JINDAL MAKE SEAT FRAME : 32 NB GI B-CLASS PIPE -JINDAL MAKE HANDLE & SEAT: LLDPE STERING IS USED PIPE CAP: GALVANISED CAP. BEARING HOUSING AND PIN :SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS. BEARINGS : PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. |
| 91 | PROVIDING AND FIXING OF LEG PRESS DOUBLE FUNPLAY FNF 006D HAVING DIMENSION: • PRODUCT AREA : 6.6 FT X 1.8 FT • SAFE PLAY AREA : 10.6 FT X 5.8 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS LEG MUSCLES TECHNICAL SPECIFICATIONS: CENTRE PIPE: 100 NB GI C-CLASS PIPE -JINDAL MAKE SEAT FRAME: 32 NB GI B-CLASS PIPE JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE CAP:GALVANISED CAPS BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN:SEAMLESS PIPE & ROUND BAR BEARINGS : REPUTED MAKE (FAG/SKF) STOPPER: PU ROD. 50MM DIA. NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. |
| 92 | PROVIDING AND FIXING OF TWISTER THREE WAY FUNPLAY FNF 009 HAVING DIMENSION: • PRODUCT AREA : DAIMETER 5.5 FT • SAFE PLAY AREA : DIAMETER 11 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS ABDOMINAL MUSCLE TECHNICAL SPECIFICATIONS: MAIN FRAME : 100 NB GI C-CLASS PIPE -JINDAL MAKE HANDLE FRAME: 20 NB GI B-CLASS PIPE JINDAL MAKE TWISTER DISC: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. |
| 93 | PROVIDING AND FIXING OF ABB TRAINER FUNPLAY FNF 017 HAVING DIMENSION: • PRODUCT AREA : 5.7 FT X 2.1 FT • SAFE PLAY AREA :9.7 FT X 6.1 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHEN ABDOMINAL MUSCLES AND PREVENT LOWER BACK STRAIN TECHNICAL SPECIFICATIONS: • MAIN FRAME IS MADE UP OF 40 NB & 32 NB GI B CLASS PIPE • STIFFENER IS MADE UP OF 25 NB GI B CLASS PIPE. • FOOT LOCK IS MADE UP 50 NB GI B CLASS PIPE • ABB TRAINER TOP IS MADE UP OF LLDPE PLASTIC • SIZE OF TOP WILL BE 375 MM X 1150 MM X 40 MM THICK COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. Please Enable Macros to View BoQ information |
