|
| 1 | Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. SOR S.I. No. 651/2018 (make - philips / crompton / bajaj / utkarsh or its Equivalent) |
| 2 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR SI NO 501/18 ( Make Polycab/Havells/universal/Grandlay or its Equivalent)10 sq. mm 4 core |
| 3 | Supply and fixing of plain or pin type copper tin plated cable socket( lug ) to the cable leads, insulating with tape and making connectionetc. complete in all respect as per direction of the Engineer- Incharge. SOR SI NO 504/18 10 sq. mm |
| 4 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 to 50 Watt. Confirming to IP 65 and above protection complete in all respect.SOR SI NO. 1423/18 CAT. AAA (make - philips / Wipro / crompton / Surya or its Equivalent) |
| 5 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch meteringinstrument & instrument box with CTs etc. in case of TPN, complete in allrespect. SOR SI NO. 807/2018 Make L&T/ Siemens/Havells or its Equivalent) 15 A TPN |
| 6 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. DSR SI No. 14.15.1/22 63 mm dia (OD-63 mm & ID-51 mm nominal) (127X0.8512=108.00) |
| 7 | Supply and fixing of factory wried integral LED flood light luminaires having die cast aluminium body and diffuser with driver set suitable for 170 TO 200 Watt. Confirming to IP 66 and above Protection complete in all respects CAT- AAA PWD SOR S.I. No. 1455/2018 (Make-philips/crompton/Surya/Wipro or its Equivalent) |
| 8 | S/F of 63Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit angle iron bracket complete in all respects. CAT -B PWD SOR S.I. No. 315/2018 Make L&T/ Siemens/Havells or its Equivalent) |
| 9 | S/E of overhead line with ACSR conductor on poles/servise bracket including binding binding etc. complete in all respect. SOR no 627/2018 |
| 10 | Supply and burying of 40mm dia x 4.5 meters long G.I. pipe vertically for earthing having 12 mm dia. holes spaced 75 mm apart drilled up to 2 meter from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) up to switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal / coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. PWD SOR S.I. No. 701/2018 |
| 11 | S of D clamp of 38 mm x 6 mm flat iron for wall/roof type servise bracket with bolts, nuts etc. complete in all respects including painting with aluminium paint. SOR no 624/2018 |
| 12 | S/F of 75 mm x 90 mm shackle insulator/ 100 mm x 65 mm pin insulator including G.I Bolts/spindle nuts etc. complete in all respect. SOR No. 620/2018 Please Enable Macros to View BoQ information |
