|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge. (A) All kinds of soil. |
| 2 | B) Ordinary Roch |
| 3 | C) Hard Rock |
| 4 | Rock bolting and grouting for fastening 25mm dia steel into the drilled hole with binding material, the drilled hole should be atleast 2' length, the steel rod need to be 6' length per piece of which 2' embedd in to hole and 4' to be outside for path ,direction as per site engineer complete job. |
| 5 | STONE SOLLING Dumping of stone excluding cost of stone (in horizontal on level) |
| 6 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand(zone-III)derived from natural sources : 6 graded stone aggregate 40 mm nominal size) (crushed) |
| 7 | Design supply and installation/ fixing staircase railling of stainless steel (Grade 304) railing (Top Handrail Dia>50mm, two number intermediate Horizontal tubes dia>25mm and Rectangular two Pair Balusters dia >38mm @1000mmC/C) made of Hollow tubes Channels,plates etc including welding, grinding, buffing, polishing and making curvature (wherever required ) including fixing the railing with necessary accessories, newal post, balusters and stainless steel dash fasteners, stainless arrangement as per approval of Engineer-in-charge, necessary screws/ fixtures complete job as per approved by engineer in charge (Note: no additional payment shall be made to master pillar/Newal post). |
| 8 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column |
| 11 | Providing and laying well dressed Granite stone or slate stone (Yhamangs) or any other stone of same properties form the site in pathways of required size and shape as per architect or incharge engineer embedding in mud/laying in cement mortar and filling of red coarsed soil or crushed white aggregate between gaps includings royalty, transportation, loading/ unloading all complete job. |
| 12 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate) finished with a floating coat neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm nominals size stone aggregate. |
| 13 | Steel work welded in built up sections/framed works, including cuttings,hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in gratings frames,guard bar, ladder, railing etc for footpath complete. |
| 14 | Providing and fixing Precoated galvanised iron profil sheet (size, shape and pitch of corrugation as approved by Engineer-in-charge ) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277,in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.Sheet schould have protective guard film of 25micronsminimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55m) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excludings cost of purlins,rafters and trusses and including cutting tosize and shape complete. |
| 15 | Supply and installation of outomatic solar Street light with pole of minimum 18ft height ISI Certified minimum 12 hour power backup, including wiring etc lighting 40-50 W, Pole Foundations in M10 Grade (1:3:6) 10mm Crushed Aggregate 510x 510x510 mm Anchor block size, Excavation,Soling below Anchor Block and all necessary fixtures, hooks complete job as approved by Engineer-in-charge. |
| 16 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1mm thick brand etc. |
| 17 | CEMENT PLASTER (IN COARSE SAND) 20mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) sal wood |
| 19 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood 25mm to40 mm thick shutter) |
| 20 | Provision for supply and installating , commissioning of flexible LED low voltage neon flex light weather proof including wiring and other accessories complete for total of 400 outdoor stair steps ,directions as per site engineer complete job. |
| 21 | Providing and fixing up to floor five level level precast cement concrete solid blocks including and setting in position in cement mortar 1:3 (1 cement :3 coarse sand) cost of required shuutering and curing complete 4.10.2.1:3:6 ( 1cement :3 coasre sand :6 graded stone aggregate 20mm nominals size ) including carriage complete. |
| 22 | Providing wood work in frames of fals celing partitions etc sawn and fixted in position with necessary stainless steel screws etc budloo /fir wood. |
| 23 | Providing and fixing of glass panes, of 4.00 mm thick with putty and glazing clips in steel doors windows, clerestory windows including all type of fixture by way of wooden complete. |
| 24 | Applying priming coat: With ready mixed pik or grey primer of approved brand and manufacture on wood etc. |
| 25 | Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete. |
| 26 | Providing and fixing local talboo(Second order branch willow tree) including providing an ornamental look and fixing with nail complete job. |
| 27 | 10cm thick (average) mud phaskha of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar with bhusha @35kg per cum of earth and gobri leaping with mix 1:2( 1clay:2cow dung) and covered with machine moulded tile bricks, grouted with cement mortar 1:3 (1 cement :3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat.12.17.1 With machine moulded common burnt clay F.P.S (non modular) brick tiles of class designtion 12.5 conforming to IS 2691. |
| 28 | Supply and installation of laminate flooring high density fiberboard (HDF) 820kg/cum density smooth matt finish 12mm thick single click with U Groove having Abrassion Class AC4 manufactured by embossed in Register (EIR) procces including under flooring foam 4mm thick, skirting, rebrand as per ducer ,tee profile and beeding all complete job (Leben, Robina or any other approved brand specifications approved by engineer in charge. |
| 29 | Carriage of defferent materials from source to site of work including loading unloading and stacking complete (A) Cement for an avg lead of 35 km by MT. |
| 30 | B) Sand for an avg leads of 10 km by MT. |
| 31 | C) Bajri for an avg leads of 10 km by MT. |
| 32 | D) Steel for an avg leads of 35 km by MT. Please Enable Macros to View BoQ information |
