|
| 1 | Annexure-A (LABOUR CHARGES) |
| 2 | Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual. |
| 3 | Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work |
| 4 | Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line |
| 5 | Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual. |
| 6 | Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work |
| 7 | Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual. |
| 8 | Erection of SP-33 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual. |
| 9 | Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel & clamps as per RESPO manual. |
| 10 | Grouting of pole in size 0.45x0.45x1/9 of the support in CC ration 1:4:8(1 cement:4 graded stone20 mm niminal size: 8 coarse sand) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, levelling as per RESPO cnstruction manual. |
| 11 | Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc. |
| 12 | Dismantling of existing LT line 1P 2W including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel) |
| 13 | Dismantling of existing LT line 3P 4W including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel) |
| 14 | Painting of pole with angle and channel and all steel part by one coat of Red Oxide Primer and two coats of aluminium Paint and two strip of fluorescent altemate Red and White paint 30 Cm wide upto 1.5 Mtrs. From ground level. |
| 15 | Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km) |
| 16 | Cartage of ST pole SP-33 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km) |
| 17 | Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km) |
| 18 | Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 21-50 Km) |
| 19 | Headload cartage of PCC Pole from road to site (distance 0-1 Km) |
| 20 | Headload cartage of SP-33 Pole from road to site (distance 0-1 Km) |
| 21 | Headload cartage of SP-55 Pole from road to site (distance 0-1 Km) |
| 22 | Head load cartage of small material(distance 1-3 Km) |
| 23 | Disconnection & Reconnection of Consumer. |
| 24 | Straightening of Tilted STP Poles as per Direction of Engineer in Charge. |
| 25 | Tightening of Stay Set as per Direction of Engineer in Charge. |
| 26 | Digging of Pit through Hammer at CC, DAMAR Road. |
| 27 | Installation of LT Distribution Box 3 Phase for LT AB Cable. |
| 28 | Fixing of MS Clamp as per Direction of Engineer in Charge. |
| 29 | Erection of Dead End Clamp as per Direction of Engineer in Charge. |
| 30 | Erection of Suspension Clamp as per Direction of Engineer in Charge. |
| 31 | Laying and fixing of 1x35sqmm XLPE Cable as per Direction of Engineer in Charge. |
| 32 | Fixing of Piercing Connector 120-35 Sq.MM. |
| 33 | Fixing of PG Clamp 95-95 Sq.MM. |
| 34 | Laying/Erection & Commissioning of LT AB Cable of size 3x120+1x95 Sq.MM |
| 35 | Back Carriage of Scrap Material. |
| 36 | Lopping Chopping of Tree Branches near HT/LT Line. |
| 37 | Annexure-B (SUPPLY ITEMS) (As per UPCL Norms) |
| 38 | Supply of PG Clamp 95-25 Sq.mm. |
| 39 | Supply of PG Clamp 95-95 Sq.mm. |
| 40 | Supply of Suspension Clamp with Eye Hook. |
| 41 | Supply of Dead End Clamp with I Hook. |
| 42 | Supply of Stay Insulator |
| 43 | Supply of Copper Stick/Copper Flat 50x6 mm |
| 44 | Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 95 Sqmm TYCO/RPG/3M Make. |
| 45 | Supply of MS Clamp with N&B for Suspension Clamp |
| 46 | Supply of MS Clamp with N&B for PCC Dead End Clamp |
| 47 | Supply of Stay Clamp with N&B |
| 48 | Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 35 Sqmm TYCO/RPG/3M Make. |
| 49 | Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer (Sintex/RMC make or other ISO reputed company) with Panel Lock with key) (As per drawing attached) |
| 50 | Supply of Al. Crimping type Lugs 120 SQ.MM |
| 51 | Supply of Al. Crimping type Lugs 35 SQ.MM |
| 52 | Supply of MS Half Clamp for LT Distribution Box Please Enable Macros to View BoQ information |
