Tender For Furnishing Of Vvip Areas Of Himachal Niketan At Dwarka Sector 19 New Delhi (Sh:- Providing And Fixing Furniture Articals And Curtains In Vvip Area Of Himachal Niketan At Dwarka Sector 19 New Delhi), Dwarka-Delhi

TDR : 54548413

Tender Notice
BOQ

2 Days Left

Dwarka , Delhi

Tender Brief : Tender For Furnishing Of Vvip Areas Of Himachal Niketan At Dwarka Sector 19 New Delhi (Sh:- Providing And Fixing Furniture Articals And Curtains In Vvip Area Of Himachal Niketan At Dwarka Sector 19 New Delhi)

Document Fees
₹ 2000 /-

EMD
₹ 199830.0 /-

Tender Value
₹ 99.91 Lakhs /-

Submission Date
17-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Supplying and placing at site a classical three-seater Sofa Set with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
2	Supplying and fixing at site Centre Table of size 4’-0’’X 2’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
3	Supplying and placing at site a classical Arm Chair with legrest with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
4	Supplying and fixing at site TV console of size 1400x300x800mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
5	Supplying and placing at site a classical Sofa Chair with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade and heavy gold paint at approved locations for highlighting detailing works including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
6	Supplying and fixing at site Side Table of 400mm. dia. with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
7	DINING AREA :- Supplying and fixing at site 8 seater dining table of size 4'x8' of required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica sheet and overlaid by italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) including inlay work of mother fo perls and polyster coating with minimum 2mm. thickness and corner italian stone moulding in pariferry all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
8	Supplying and placing at site a dining chair without arm rest with deep carving works having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of dining chair with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
9	Supplying and fixing at site TV console of size 1600x300x650mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including gold leafing paint on mouldings over desired locations including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
10	TV LOUNGE:- Supplying and placing at site a classical Two Seater Sofa with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
11	Supplying and placing at site a classical Three Seater Sofa with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
12	Supplying and fixing at site Centre Table of size 3’-0’’X 3’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with 20mm. thick italian stone (base price of italian stone minimum 1000 per sqft.), with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
13	Supplying and placing at site a classical Sofa Chair with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade and heavy gold paint at approved locations for highlighting detailing works including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
14	Supplying and fixing at site TV console of size 2000x400x500mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
15	Supplying and fixing at site Centre Table of size 2’-0’’X 2’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with 20mm. thick italian stone (base price of italian stone minimum 1000 per sqft.), with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
16	Supplying and fixing at site TV console of size 1500x400x800mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
17	BEDROOM 1 :--Supplying and placing at site a classical Two Seater Sofa with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
18	Supplying and fixing at site Side Table of 400mm. dia. with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
19	Supplying and placing at site a classical King Size Bed of dimension 6'x6'6\\"x12\\" haveing bad back of height 4'x6\\" with deep carving works having mm foam of Sleepwell or equivalent brand of 32 density. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Top of bed with 18mm. thick BWP Board of Greenlamp & equivelent both side covered with mica 1mm. thick and quilting on exposed areas as per approved design/pattern and Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including king size bed mattress of 8\\" overall thickness of sleepwell spinecare or equivelent (base price of mattress be minimum 60,000) including required number of pillows/cusions with cover and bedsheets of approved make and bed runner of approveed design and shades. Legs of bed to be fixed with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
20	Supplying and fixing at site Bed Side Table of size 650x500x550mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
21	Supplying and fixing at site TV console of size 1600x300x750mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
22	SECOND FLOOR VVIP WAITING AREA :- Supplying and placing at site a classical Two Seater Sofa with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
23	Supplying and placing at site a classical Three Seater Sofa with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
24	Supplying and placing at site a classical Sofa Chair with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
25	Supplying and fixing at site Centre Table of size 2’-0’’X 4’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with 20mm. thick italian stone (base price of italian stone minimum 1000 per sqft.), with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
26	Supplying and fixing at site Side Table of 450mm. dia. 500 Height with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
27	Supplying and fixing at site Coffee Counter of size 1200x300x750mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
28	WAITING LOUNGE :- Supplying and placing at site a classical Three Seater Sofa with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
29	Supplying and fixing at site Centre Table of size 2’-0’’X 4’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with 20mm. thick italian stone (base price of italian stone minimum 1000 per sqft.), or 8mm. thick toughened glass of saint-gobain with bevelled edge and itching at top of required desingn to be fix in recessed teak wood frame all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
30	Supplying and fixing at site Side Table of 450mm. dia. 500 Height with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
31	Supplying and placing at site a classical wooden Chair with deep carving works of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
32	Supplying and fixing at site Coffee Counter of size 1800x400x600mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
33	Supplying and fixing at site Coffee Counter of size 900x300x750mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
34	CM OFFICE :- Supplying and placing at site a classical Two Seater Sofa with deep carving works for VVIP Office of 2nd floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
35	Supplying and placing at site a classical Three Seater Sofa with deep carving works for VVIP Office of 2nd floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
36	Supplying and placing at site a classical Sofa Chair with deep carving works for lounge area of first floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
37	Supplying and fixing at site Centre Table of size 2’-0’’X 4’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with 20mm. thick italian stone (base price of italian stone minimum 1000 per sqft.), with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
38	Supplying and fixing at site Centre Table of size 4’-0’’X 4’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with 20mm. thick italian stone (base price of italian stone minimum 1000 per sqft.), with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
39	Supplying and fixing at site Side Table of 450mm. dia. 500 Height with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
40	Supplying and fixing at site Side Table of 2'X2' with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
41	Supplying and placing at site a classical wooden Chair with deep carving works of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
42	Supplying and fixing at site Office Table of size 8'X4' with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top, sides etc. in BWP board 19mm. thickness of greenlam or equivelent with leathered top at center having nylone threading (base price of leather minimum 3000 per Rmt.) and rest area in veneered face, Having 2 sides with drawer units of miimum width 600mm, Having solid pillars, gold leafing works, brass handles and all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including foot rest at bottom and table top sloping unit at top and gold finished wire manager. Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
43	Providing and supplying and placing at position high back chair for CM office with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The seat and back shall be upholstered with leather with base price of 3000/Rmt. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine. The armrest shall be made of black integral polypropylene arm completely joint with seat. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm with standard class-3 gas-lift to suit them using the lever under the seat. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700mm and fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon. The seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 mm(W) X 625±10 mm(H) from seat & overall height = 1060±10 mm including carriage of materials in all leads and lift as per direction of Engineer in Charge
44	Supplying and fixing at site Coffee Counter of size 1800x400x600mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
45	CM CABIN WAITING:- Supplying and placing at site a classical Two Seater Sofa with deep carving works for Slamm Waiting area of 2nd floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
46	Supplying and placing at site a classical Three Seater Sofa with deep carving works for Slamm Waiting area of 2nd floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
47	Supplying and fixing at site Side Table of 2'X2' with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
48	Supplying and fixing at site Centre Table of size 3’-0’’X 3’-0’’ with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with 20mm. thick italian stone (base price of italian stone minimum 1000 per sqft.), with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
49	Supplying and fixing at site Coffee Counter of size 1200x300x750mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
50	DISCUSSION ROOM :- Supplying and placing at site a classical wooden Chair with deep carving works of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
51	Supplying and fixing at site Centre Table 1500mm dia with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with 20mm. thick italian stone (base price of italian stone minimum 1000 per sqft.), with top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
52	Supplying and fixing at site TV console of size 2100x450x750mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
53	DINING AREA:- Supplying and fixing at site 10 seater dining table of size 10'x4' of required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica sheet and overlaid by italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) including inlay work of mother fo perls and polyster coating with minimum 2mm. thickness and corner italian stone moulding with 6mm thick brass sheet sandwitch between two stones oth overall depth of 40mm in pariferry and all wood work coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
54	Supplying and placing at site a dining chair without arm rest with deep carving works having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of dining chair with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
55	Supplying and fixing at site Coffee Counter of size 1200x400x800mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
56	Supplying and fixing at site Coffee Counter of size 1800x400x850mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
57	BEDROOM 1 :- Supplying and placing at site a classical Seven Seater Sofa L-Shaped with deep carving works for Bed Room -1 of 2nd floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
58	Supplying and fixing at site Centre Table 1400mmX900mmX300mm with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent both side covered with 1mm. thick mica and top finished with veneer all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including Stainless steel with brass PVD hammered look bottom part including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction re-working will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
59	Supplying and fixing at site Study Table of size 2400mmX1200mm with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top, sides etc. in BWP board 19mm. thickness of greenlam or equivelent with leathered top having nylone threading (base price of leather minimum 3000 per Rmt.) and rest area in veneered face with V grain veneer, Having 1 side with drawer units of miimum width 600mm, brass handles and all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including foot rest at bottom and table top sloping unit at top and gold finished wire manager. Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
60	Supplying and fixing at siteconsole unit of size 2400x400x750mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
61	Providing and supplying and placing at position high back Study chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 15mm thick hot pressed commercial plywood padded with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32Kg/m³ in back. The seat and back shall be upholstered with leather with base price of 3000/Rmt. The backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support. The seat and back shall be arrested together with 50-60µ thick powder coated HR steel spine. The armrest shall be made of black integral polypropylene arm completely joint with seat. For seating durability the chair shall have swivel tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 120mm with standard class-3 gas-lift to suit them using the lever under the seat. The pedestal should have five legged injection moulded in black 30% glass filled nylon having pitch circle dia. 700mm and fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon. The seat size shall be 465±10 mm(W) X 460±10 mm(D) and back size shall be 480±10 mm(W) X 625±10 mm(H) from seat & overall height = 1060±10 mm including carriage of materials in all leads and lift as per direction of Engineer in Charge
62	Supplying and placing at site a classical easy Chair with deep carving works of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
63	Supplying and placing at site a classical King Size Bed of dimension 6'x6'6\\"x12\\" haveing bad back of height 4'x6\\" with deep carving works having mm foam of Sleepwell or equivalent brand of 32 density. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Top of bed with 18mm. thick BWP Board of Greenlamp & equivelent both side covered with mica 1mm. thick and quilting on exposed areas as per approved design/pattern and Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including king size bed mattress of 8\\" overall thickness of sleepwell spinecare or equivelent (base price of mattress be minimum 60,000) including required number of pillows/cusions with cover and bedsheets of approved make and bed runner of approveed design and shades. Legs of bed to be fixed with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
64	Supplying and fixing at site Bed Side Table of size 650x500x550mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
65	Supplying and placing at site a classical Sofa Chair with deep carving works for Bed Room-1 of 2nd floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
66	Supplying and placing at site a Puff unit having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of Puff with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
67	BEDROOM 2:- Supplying and placing at site a classical King Size Bed of dimension 6'x6'6\\"x12\\" haveing bad back of height 4'x6\\" with deep carving works having mm foam of Sleepwell or equivalent brand of 32 density. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Top of bed with 18mm. thick BWP Board of Greenlamp & equivelent both side covered with mica 1mm. thick and quilting on exposed areas as per approved design/pattern and Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including king size bed mattress of 8\\" overall thickness of sleepwell spinecare or equivelent (base price of mattress be minimum 60,000) including required number of pillows/cusions with cover and bedsheets of approved make and bed runner of approveed design and shades. Legs of bed to be fixed with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
68	Supplying and fixing at site Bed Side Table of size 650x500x550mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
69	Supplying and placing at site a classical Three Seater Sofa with deep carving works for Bed Room 2 of 2nd floor of required seats having mm foam of Sleepwell or equivalent brand of density 40 in seating and other area cushioning with 32 densities. All exposed frame work using 1st class Nagpur teak wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge and rest framework with Marandi wood. Tapestry work (Base price of Cloth, leather of make D’décor, Stanley or equivalent with minimum 1500/Rmt, 500/Sft respectively) with final finished with minimum three coat of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) including desired number of cushions with cover and puffs of required thickness. Legs of sofa with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
70	Supplying and fixing at siteconsole unit of size 2400x300x350mm. with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with top finished with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.), all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including heavy antiq brass handle of hattic/hafle of equivelent (base price minimum 1000 each handle) all the fitings should be of hafle or equivelent including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
71	Supplying and fixing at site Side Table of 400mm. dia. with required height with all exposed frame work made of 1st class Nagpur Teak Wood with various grooves and mouldings of varying sizes at approved locations as approved by Engineer-in-charge with hard Top in BWP board 19mm. thickness of greenlam or equivelent with italian stone 20mm. thickness (base price of italian stone minimum 1000 per sqft.) all coated with minimum 3 spray of PU polish of Sirca or equivalent of approved shade including making of shop drawings and three stage approvals viz. 1. Carcas Making 2. Foam/ basic material cladding 3. Before final finish from engineer in charge (if cuts and angles are not as per desired satisfaction reworking will be done on his own cost and nothing extra will be paid) Legs of table with screw/nail on rubber bush will be fixed with screw in tongue and groove manner complete in all respect including carriage of materials in all leads and lift as per direction of Engineer in Charge.
72	Providing and fixing sliding door wardrobe of overall size as per site requirements. The framework shall be constructed with 18mm thick BWP (Boiling Water Proof) grade plywood. Shutters to be made of slim aluminum profiles with fluted/ribbed glass (approx. 4mm to 6mm thickness). Includes heavy-duty top-hung or bottom-rolling telescopic sliding mechanism for smooth, silent operation. Internal partitions to include hanging rods, drawers with soft-close channels, and shelves. Includes integrated LED strip lighting with motion sensors. All exposed surfaces finished with premium laminate or veneer. All hardware (handles, rollers, tracks) to be of approved make (e.g., Hafele, Hettich, or equivalent) complete including carriage of materials in all leads and lift.
73	Providing and fixing superior quality Carpet of approved shade, texture,size etc. as approved from Engineer in charge including placing at location complete (Base price of carpet shall be minimum 1000 per square feet) complete including carriage of materials in all leads and lift.
74	Providing and fixing superior quality blackout curtains using D'Decor or equivalent brand of approved shade and pattern as approved by engineer in charge having fabric with a minimum weight of 200–300 GSM (Base price of cloth including blackout cloth should be minimum 1500 per Rmt ). The work includes professional tailoring with decorative piping on vertical edges and double-stitched bottom hems for a premium finish including the installation with heavy-duty roller-type sliding curtain rod of required length and designer curtain pull rod etc complete in all respect. ( Measurment of curtain shall be From top finished edge to bottom finished edge of indivisual curtain with minimum width of three feet) including carriage of materials in all leads and lift.
75	Providing and fixing superior quality shear curtains using D'Decor or equivalent brand of approved shade and pattern as approved by engineer in charge having fabric with a minimum weight of 100–200 GSM (Base price of cloth including blackout cloth should be minimum 1100 per Rmt ). The work includes professional tailoring with decorative piping on vertical edges and double-stitched bottom hems for a premium finish including the installation with heavy-duty roller-type sliding curtain rod of required length and designer curtain pull rod etc complete in all respect. ( Measurment of curtain shall be From top finished edge to bottom finished edge of indivisual curtain with minimum width of three feet) including carriage of materials in all leads and lift.
76	Supplying and fixing at glazed door shutter 38mm thick and glazed partitions in First Class teak wood having 8 mm thick plain/ fluted glass, fixed with required quantity of ball bearing butt hinges and other door fittings in Brass complete in all respect as per drawing including two coats of melamine polish as per approved shade complete as per direction of Engineer in charge complete including carriage of materials in all leads and lift. NOTE: All furnishing items of the BOQ specimen are attached as per Annexure–A. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Delhi Tenders

Services Tenders

Space Planning and Designing Tenders

Furnishing Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Furnishing Of Vvip Areas Of Himachal Niketan At Dwarka Sector 19 New Delhi (Sh:- Providing And Fixing Furniture Articals And Curtains In Vvip Area Of Himachal Niketan At Dwarka Sector 19 New Delhi), Dwarka-Delhi

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Furnishing Of Vvip Areas Of Himachal Niketan At Dwarka Sector 19 New Delhi (Sh:- Providing And Fixing Furniture Articals And Curtains In Vvip Area Of Himachal Niketan At Dwarka Sector 19 New Delhi), Dwarka-Delhi

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us